This test revolves around a central function that will first serialize
an EVP_PKEY, then deserialize the result into a new EVP_PKEY and
compare the two.
The following tests are currently implemented:
1. EVP_PKEY (RSA) -> DER, then DER -> EVP_PKEY (RSA).
2. EVP_PKEY (RSA) -> PEM, then PEM -> EVP_PKEY (RSA).
This one exercises deserializer chains, as we know that there is a
PEM -> DER and a DER -> EVP_PKEY (RSA) deserializer, but no direct
PEM -> EVP_PKEY (RSA) deserializer.
Additionally, a small fix in test_fail_string_common(), as strcmp()
could run past a buffer if one of the strings isn't terminated with
a null byte within the given length.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12410)
Fixes#11864
- The dsa keygen assumed valid p, q, g values were being passed. If this is not correct then it is
possible that dsa keygen can either hang or segfault.
The fix was to do a partial validation of p, q, and g inside the keygen.
- Fixed a potential double free in the dsa keypair test in the case when in failed (It should never fail!).
It freed internal object members without setting them to NULL.
- Changed the FFC key validation to accept 1024 bit keys in non fips mode.
- Added tests that use both the default provider & fips provider to test these cases.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12176)
Really this test should go in evp_extra_test. However that doesn't
currently support a non-default libctx (with the "null" provider in the
default libctx). So (for now) we create evp_extra_test2.c
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12159)
For FIPS validation purposes - Automated Cryptographic Validation Protocol (ACVP) tests need to be
performed. (See https://github.com/usnistgov/ACVP). These tests are very similiar to the old CAVS tests.
This PR uses a hardwired subset of these test vectors to perform similiar operations,
to show the usage and prove that the API's are able to perform the required operations.
It may also help with communication with the lab (i.e- The lab could add a test here to show
a unworking use case - which we can then address).
The EVP layer performs these tests instead of calling lower level API's
as was done in the old FOM.
Some of these tests require access to internals that are not normally allowed/required.
The config option 'acvp_tests' (enabled by default) has been added so that this
access may be removed.
The mechanism has been implemented as additional OSSL_PARAM values that can be set and get.
A callback mechanism did not seem to add any additional benefit.
These params will not be added to the gettables lists.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11572)
We did not have a test of the low level CMAC APIs so we add one. This is
heavily based on the HMAC test.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11972)
Output that's supposed to be understood by a TAP parser gets its own
BIOs (|tap_out| and |tap_err|), and is only used internally within
testutils. |bio_out| and |bio_err| is now only used for output that
shouldn't be parsed by the TAP parser, and all output written to those
BIOs are therefore always made to look like comments (it gets prefixed
with "# ").
Indentation and prefixing with "# " is reworked to use BIO_f_prefix(),
which allows us to throw away the internal BIO_f_tap().
The indentation level is now adjusted via a special function.
Fixes#12054
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12057)
The filtering provider can be used to place a filter in front of the
default provider. Initially to filter out certain algorithms from being
available for test purposes.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11834)
There are cases where the fallback providers aren't treated right.
For example, the following calls, in that order, will end up with
a failed EVP_KEYMGMT_fetch(), even thought the default provider
does supply an implementation of the "RSA" keytype.
EVP_KEYMGMT *rsameth = NULL;
OSSL_PROVIDER_available(NULL, "default");
rsameth = EVP_KEYMGMT_fetch(NULL, "RSA", NULL);
For good measure, this also tests that explicit loading of the default
provider won't fail.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11926)
Fixes#11743
The ouput format had 2 issues that caused it not to match the expected documented format:
(1) At some point the thread id printing was changed to use the OPENSSL_hex2str method which puts ':' between hex bytes.
An internal function that skips the seperator has been added.
(2) The error code no longer exists. So this was completely removed from the string. It is now replaced by ::
As an example:
00:77:6E:52:14:7F:00:00:error:asn1 encoding routines:asn1_check_tlen:wrong tag:crypto/asn1/tasn_dec.c:1135:
Is now:
00776E52147F0000:error::asn1 encoding routines:asn1_check_tlen:wrong tag:crypto/asn1/tasn_dec.c:1135:
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11789)
This was added before the changes to the sslap/ssl_new/ssl_old tests which
run those tests with a non-default library context. It no longer adds
anything that those tests don't already do, so it can be deleted.
This also fixes a number of run-checker build failures which were failing
in this test if TLSv1.2 was disabled.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11832)
Also improve the generic HTTP client w.r.t. proxy and no_proxy options.
Certificate Management Protocol (CMP, RFC 4210) extension to OpenSSL
Also includes CRMF (RFC 4211) and HTTP transfer (RFC 6712).
Adds the CMP and CRMF API to libcrypto and the "cmp" app to the CLI.
Adds extensive documentation and tests.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11404)
Certificate Management Protocol (CMP, RFC 4210) extension to OpenSSL
Also includes CRMF (RFC 4211) and HTTP transfer (RFC 6712).
Adds the CMP and CRMF API to libcrypto and the "cmp" app to the CLI.
Adds extensive documentation and tests.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11300)
Certificate Management Protocol (CMP, RFC 4210) extension to OpenSSL
Also includes CRMF (RFC 4211) and HTTP transfer (RFC 6712).
Adds the CMP and CRMF API to libcrypto and the "cmp" app to the CLI.
Adds extensive documentation and tests.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11142)
The default is openssl.cnf The project seems to prefer xxx.conf these
days, but we should use the default convention.
Rename all foo.conf (except for Configurations) to foo.cnf
Fixes#11174
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11176)
Provide EC serializers for text, pem and der.
EC parameters use ANS1 'CHOICE' - which means they are more embedded than other parameters used by
other KEY types (which normally have a SEQUENCE at the top level).
For this reason the ANS1_STRING type that was being passed around has been changed to a void so that the
code can still be shared with EC.
The EC serializer only supports named curves currently.
NOTE the serializer code assumes PKCS8 format - if the older encode methods are needed they will need to be
added in another PR. (Probably when deserialization is considered).
EVP_PKEY_key_fromdata_init was changed from using a keypair selection to all bits of a key. A side effect of this was
that the very restrictive checks in the ecx code needed to be relaxed as it was assuming all selection flags were non
optional. As this is not the case for any other key the code has been modified.
Fixed a bug in legacy_ctrl_str_to_params() - "ecdh_cofactor_mode" was being incorrectly converted to the wrong keyname.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11107)
Use of the low level DH functions has been informally discouraged for a
long time. We now formally deprecate them.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11024)
Use of the low level RSA functions has been informally discouraged for a
long time. We now formally deprecate them.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11063)
add CMP message validation and related tests; while doing so:
* add ERR_add_error_mem_bio() to crypto/err/err_prn.c
* move ossl_cmp_add_error_txt() as ERR_add_error_txt() to crypto/err/err_prn.c
* add X509_STORE_CTX_print_verify_cb() to crypto/x509/t_x509.c,
adding internally x509_print_ex_brief(), print_certs(), and print_store_certs()
* move {ossl_cmp_,}X509_STORE_get1_certs() to crypto/x509/x509_lu.c
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/10620)
Embed libctx in dsa and dh objects and cleanup internal methods to not pass libctx (This makes it consistent with the rsa changes)
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10910)
Use of the low level DSA functions has been informally discouraged for a
long time. We now formally deprecate them.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10977)
The new client has become an independent libcrpyto module in crypto/http/ and
* can handle any types of requests and responses (ASN.1-encoded and plain)
* does not include potentially busy loops when waiting for responses but
* makes use of a new timeout mechanism integrated with socket-based BIO
* supports the use of HTTP proxies and TLS, including HTTPS over proxies
* supports HTTP redirection via codes 301 and 302 for GET requests
* returns more useful diagnostics in various error situations
Also adapts - and strongly simplifies - hitherto uses of HTTP in crypto/ocsp/,
crypto/x509/x_all.c, apps/lib/apps.c, and apps/{ocsp,s_client,s_server}.c
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/10667)
We test that SSL_CTX_new_with_libctx() can be used to control the libctx
that is in use for SSL operations.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10854)
Use of the low level ECDSA and EC_KEY_METHOD functions has been informally discouraged for a
long time. We now formally deprecate them.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10960)
Use of the low level HMAC functions has been informally discouraged for a
long time. We now formally deprecate them.
Applications should instead use EVP_MAC_CTX_new(3), EVP_MAC_CTX_free(3),
EVP_MAC_init(3), EVP_MAC_update(3) and EVP_MAC_final(3).
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10836)
Use of the low level DES functions has been informally discouraged for a
long time. We now formally deprecate them.
Applications should instead use the EVP APIs, e.g. EVP_EncryptInit_ex,
EVP_EncryptUpdate, EVP_EncryptFinal_ex, and the equivalently named decrypt
functions.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10858)
Use of the low level IDEA functions has been informally discouraged for a
long time. We now formally deprecate them.
Applications should instead use the EVP APIs, e.g. EVP_EncryptInit_ex,
EVP_EncryptUpdate, EVP_EncryptFinal_ex, and the equivalently named decrypt
functions.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10819)
Use of the low level RC5 functions has been informally discouraged for a long
time. We now formally deprecate them.
Applications should instead use the EVP APIs, e.g. EVP_EncryptInit_ex,
EVP_EncryptUpdate, EVP_EncryptFinal_ex and the equivalently named decrypt
functions.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10834)
Use of the low level RC4 functions has been informally discouraged for a long
time. We now formally deprecate them.
Applications should instead use the EVP APIs, e.g. EVP_EncryptInit_ex,
EVP_EncryptUpdate, EVP_EncryptFinal_ex and the equivalently named decrypt
functions.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10834)
Use of the low level RC2 functions has been informally discouraged for a
long time. We now formally deprecate them.
Applications should instead use the EVP APIs, e.g. EVP_EncryptInit_ex,
EVP_EncryptUpdate, EVP_EncryptFinal_ex, and the equivalently named decrypt
functions.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10834)
The test can be moved into the EVP tests and the separate executable removed.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10821)
Applications should instead use the higher level EVP APIs, e.g.
EVP_Encrypt*() and EVP_Decrypt*().
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10742)
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10633)
Applications should instead use the higher level EVP APIs, e.g.
EVP_Encrypt*() and EVP_Decrypt*().
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10740)
Use of the low level AES functions has been informally discouraged for a
long time. We now formally deprecate them.
Applications should instead use the EVP APIs, e.g. EVP_EncryptInit_ex,
EVP_EncryptUpdate, EVP_EncryptFinal_ex, and the equivalently named decrypt
functions.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10580)
This renames test/evp_fromdata_test.c to test/evp_pkey_provided_test.c,
to encourage additional testing of provider made keys.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10394)
Build it against static libraries always, since that's the only way it
can work as intended.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10516)
Avoid conflicts with some linkers.
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10439)
