ChaCha20 code uses its own custom cipher_data. Add EVP_CIPH_CUSTOM_IV
and EVP_CIPH_ALWAYS_CALL_INIT so that the key and the iv can be set by
different calls of EVP_CipherInit_ex().
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2156)
New function EVP_PKEY_CTX_md() which takes a string and passes a digest
to a ctrl.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)
The offset to the memory to clear was incorrect, causing a heap buffer
overflow.
CVE-2016-7054
Thanks to Robert Święcki for reporting this
Reviewed-by: Rich Salz <rsalz@openssl.org>
All of these don't compile cleanly any more, probably haven't for quite
some time
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1789)
crypto/evp/e_aes.c: Types of inp and out parameters of
AES_xts_en/decrypt functions need to be changed from char to
unsigned char to avoid build error due to
'-Werror=incompatible-pointer-types'.
crypto/aes/asm/aes-s390x.pl: Comments need to reflect the above
change.
Signed-off-by: Patrick Steuer <psteuer@mail.de>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
CLA: trivial
The definition of STITCHED_CALL relies on OPENSSL_NO_ASM. However,
when a configuration simply lacks the assembler implementation for RC4
(which is where we have implemented the stitched call), OPENSSL_NO_ASM
isn't implemented. Better, then, to rely on specific macros that
indicated that RC4 (and MD5) are implemented in assembler.
For this to work properly, we must also make sure Configure adds the
definition of RC4_ASM among the C flags.
Reviewed-by: Andy Polyakov <appro@openssl.org>
extra spacing and 80 cols
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1366)
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1264)
in EVP_EncryptUpdate and EVP_DecryptUpdate. It is argued that in
general case it's impossible to provide guarantee that partially[!]
overlapping buffers can be tolerated.
Reviewed-by: Matt Caswell <matt@openssl.org>
aesni_cbc_hmac_sha256_ctrl() and aesni_cbc_hmac_sha1_ctrl() cleanse the
HMAC key after use, but static int rc4_hmac_md5_ctrl() doesn't.
Fixes an OCAP Audit issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Before the addition of this function, it was impossible to read the
symmetric key from an EVP_PKEY_HMAC type EVP_PKEY.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1217)
Previously EVP_EncodeUpdate returned a void. However there are a couple
of error conditions that can occur. Therefore the return type has been
changed to an int, with 0 indicating error and 1 indicating success.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Don't copy parameters is they're already present in the destination.
Return error if an attempt is made to copy different parameters to
destination. Update documentation.
If key type is not initialised return missing parameters
RT#4149
Reviewed-by: Richard Levitte <levitte@openssl.org>
This compiles correctly, but depending on what may be defined, it's
possible that this could fail compilation. The braces are mismatched,
and it's possible to end up with an else followed by another else.
This presumes the indentation is mostly correct and indicative of
intent. Found via static analysis.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1118)
ossl_hmac_cleanup, pkey_hmac_cleanup:
- allow to invoke with NULL data
- using EVP_PKEY_CTX_[get|set]_data
EVP_DigestInit_ex:
- remove additional check for ‘type’ and doing clear free instead of
free
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
chacha20_poly1305_init_key() dereferences NULL when called with inkey !=
NULL && iv == NULL. This function is called by EVP_EncryptInit_ex()
family, whose documentation allows setting key and iv in separate calls.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add a status return value instead of void.
Add some sanity checks on reference counter value.
Update the docs.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
- Missing checks for allocation failure.
- releasing memory in few missing error paths
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
With the EVP_EncodeUpdate function it is the caller's responsibility to
determine how big the output buffer should be. The function writes the
amount actually used to |*outl|. However this could go negative with a
sufficiently large value for |inl|. We add a check for this error
condition.
Reviewed-by: Richard Levitte <levitte@openssl.org>
An overflow can occur in the EVP_EncodeUpdate function which is used for
Base64 encoding of binary data. If an attacker is able to supply very large
amounts of input data then a length check can overflow resulting in a heap
corruption. Due to the very large amounts of data involved this will most
likely result in a crash.
Internally to OpenSSL the EVP_EncodeUpdate function is primarly used by the
PEM_write_bio* family of functions. These are mainly used within the
OpenSSL command line applications, so any application which processes
data from an untrusted source and outputs it as a PEM file should be
considered vulnerable to this issue.
User applications that call these APIs directly with large amounts of
untrusted data may also be vulnerable.
Issue reported by Guido Vranken.
CVE-2016-2105
Reviewed-by: Richard Levitte <levitte@openssl.org>
An overflow can occur in the EVP_EncryptUpdate function. If an attacker is
able to supply very large amounts of input data after a previous call to
EVP_EncryptUpdate with a partial block then a length check can overflow
resulting in a heap corruption.
Following an analysis of all OpenSSL internal usage of the
EVP_EncryptUpdate function all usage is one of two forms.
The first form is like this:
EVP_EncryptInit()
EVP_EncryptUpdate()
i.e. where the EVP_EncryptUpdate() call is known to be the first called
function after an EVP_EncryptInit(), and therefore that specific call
must be safe.
The second form is where the length passed to EVP_EncryptUpdate() can be
seen from the code to be some small value and therefore there is no
possibility of an overflow.
Since all instances are one of these two forms, I believe that there can
be no overflows in internal code due to this problem.
It should be noted that EVP_DecryptUpdate() can call EVP_EncryptUpdate()
in certain code paths. Also EVP_CipherUpdate() is a synonym for
EVP_EncryptUpdate(). Therefore I have checked all instances of these
calls too, and came to the same conclusion, i.e. there are no instances
in internal usage where an overflow could occur.
This could still represent a security issue for end user code that calls
this function directly.
CVE-2016-2106
Issue reported by Guido Vranken.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Currently we can get all block ciphers with
EVP_get_cipherbyname("<alg_name>-<block-mode-name>")
for example, by names "aes-128-ecb" or "des-ede-cbc".
I found a problem with des-ede-ecb and des-ede3-ecb ciphers as
they can be accessed only with names:
EVP_get_cipherbyname("des-ede")
EVP_get_cipherbyname("des-ede3")
It breaks the general concept.
In this patch I add aliases which allow to use names:
EVP_get_cipherbyname("des-ede-ecb")
EVP_get_cipherbyname("des-ede3-ecb")
in addition to the currently used names.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
The Unix build was the last to retain the classic build scheme. The
new unified scheme has matured enough, even though some details may
need polishing.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Make OBJ_name_cmp internal
Rename idea_xxx to IDEA_xxx
Rename get_rfc_xxx to BN_get_rfc_xxx
Rename v3_addr and v3_asid functions to X509v3_...
Reviewed-by: Richard Levitte <levitte@openssl.org>
The check_defer() function was used to ensure that EVP_cleanup() was always
called before OBJ_cleanup(). The new cleanup code ensures this so it is
no longer needed.
Remove obj_cleanup() call in OID config module: it is not needed
any more either.
Reviewed-by: Matt Caswell <matt@openssl.org>
There is a preference for suffixes to indicate that a function is internal
rather than prefixes. Note: the suffix is only required to disambiguate
internal functions and public symbols with the same name (but different
case)
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
There was a lot of naming inconsistency, so we try and standardise on
one form.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
OBJ_cleanup() should not be called expicitly - we should leave
auto-deinit to clean this up instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
EVP_cleanup() should not be called expicitly - we should leave
auto-deinit to clean this up instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Move the the BIO_METHOD and BIO structures into internal header files,
provide appropriate accessor methods and update all internal code to use
the new accessors where appropriate.
Reviewed-by: Richard Levitte <levitte@openssl.org>
BIO_new, etc., don't need a non-const BIO_METHOD. This allows all the
built-in method tables to live in .rodata.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Don't have #error statements in header files, but instead wrap
the contents of that file in #ifndef OPENSSL_NO_xxx
This means it is now always safe to include the header file.
Reviewed-by: Richard Levitte <levitte@openssl.org>
There is a potential double free in EVP_DigestInit_ex. This is believed
to be reached only as a result of programmer error - but we should fix it
anyway.
Issue reported by Guido Vranken.
Reviewed-by: Richard Levitte <levitte@openssl.org>
crypto/evp/e_aes.c and crypto/modes/gcm128.c include ppc_arch.h, which
is located in crypto/, so add that as extra include directory for them.
Issue reported by Jeffrey Walton <noloader@gmail.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
We had the function EVP_CIPHER_CTX_cipher_data which is newly added for
1.1.0. As we now also need an EVP_CIPHER_CTX_set_cipher_data it makes
more sense for the former to be called EVP_CIPHER_CTX_get_cipher_data.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Implement aes128-cbc as a pipeline capable cipher in the dasync engine.
As dasync is just a dummy engine, it actually just performs the parallel
encrypts/decrypts in serial.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Make PKCS8_PRIV_KEY_INFO opaque. Several accessor functions already exist
for this structure. Two new ones were added to handle attributes.
The old handling of broken formats has been removed and the corresponding
structures simplified.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This patch implements the HMAC-based Extract-and-Expand Key Derivation
Function (HKDF) as defined in RFC 5869.
It is required to implement the QUIC and TLS 1.3 protocols (among others).
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Simplifies calling code. Also fixed up any !ptr tests that were
nearby, turning them into NULL tests.
Reviewed-by: Richard Levitte <levitte@openssl.org>
