Sort SSL_SESSION structures by timeout in the linked list.
Iterate over the linked list for timeout, stopping when no more
session can be flushed.
Do SSL_SESSION_free() outside of SSL_CTX lock
Update timeout upon use
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8687)
The function dtls1_handle_timeout() calls dtls1_double_timeout() which
was calling dtls1_start_timer(). However dtls1_start_timer() is also
called directly by dtls1_handle_timeout(). We only need to start the timer
once.
Fixes#15561
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15595)
When EVP_MD_CTX_new fails call SSLfatal before the goto err.
This resolves a state machine issue on the out of memory condition.
Fixes#15491.
CLA: trivial
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15520)
For functions that exist in 1.1.1 provide a simple aliases via #define.
Fixes#15236
Functions with OSSL_DECODER_, OSSL_ENCODER_, OSSL_STORE_LOADER_,
EVP_KEYEXCH_, EVP_KEM_, EVP_ASYM_CIPHER_, EVP_SIGNATURE_,
EVP_KEYMGMT_, EVP_RAND_, EVP_MAC_, EVP_KDF_, EVP_PKEY_,
EVP_MD_, and EVP_CIPHER_ prefixes are renamed.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15405)
Otherwise, the state machine ends up being in a bad state:
```
SSL routines:write_state_machine:missing fatal:ssl/statem/statem.c:XXX:
```
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/15487)
Parameter "header" of ssl3_cbc_digest_record was fixed to a 13 bytes header
but used as a pointer. This caused a warning about out-of-bounds array access
with GCC 11.
Fixes#15462.
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15463)
The new names are ossl_err_load_xxx_strings.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15446)
Add a pass-through switch case for TLS13_AD_MISSING_EXTENSION in
ssl3_alert_code() and tls1_alert_code(), so that the call to
SSLfatal() in final_psk() will always actually generate an alert,
even for non-TLS1.3 protocol versions.
Fixes#15375
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15412)
The initial implementation always deferred the generation of the
requested ticket(s) until the next application write, but this
is not a great fit for what it actually does, architecturally wise.
A request to send a session ticket means entering back into the
handshake state machine (or "in init", as it's known in the
implementation). The state machine transition is not something that
only occurs at an application-data write, and in general could occur at
any time. The only constraint is that we can't enter "init" while in
the middle of writing application data. In such cases we will need to
wait until the next TLS record boundary to enter the state machine,
as is currently done.
However, there is no reason why we cannot enter the handshake state
machine immediately in SSL_new_session_ticket() if there are no
application writes pending. Doing so provides a cleaner API surface to
the application, as then calling SSL_do_handshake() suffices to drive
the actual ticket generation. In the previous state of affairs a dummy
zero-length SSL_write() would be needed to trigger the ticket
generation, which is a logical mismatch in the type of operation being
performed.
This commit should only change whether SSL_do_handshake() vs zero-length
SSL_write() is needed to immediately generate a ticket after the
SSL_new_session_ticket() call -- the default behavior is still to defer
the actual write until there is other application data to write, unless
the application requests otherwise.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14817)
Add -client_renegotiation flag support. The -client_renegotiation flag is
equivalent to SSL_OP_ALLOW_CLIENT_RENEGOTIATION. Add support to the app,
the config code, and the documentation.
Add SSL_OP_ALLOW_CLIENT_RENEGOTIATION to the SSL tests. We don't need to
always enable it, but there are so many tests so this is the easiest thing
to do.
Add a test where client tries to renegotiate and it fails as expected. Add
a test where server tries to renegotiate and it succeeds. The second test
is supported by a new flag, -immediate_renegotiation, which is ignored on
the client.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15184)
It can be useful to know what group was used for the handshake's
key exchange process even on non-TLS 1.3 connections. Allow this
API, new in OpenSSL 3.0.0, to be used on other TLS versions as well.
Since pre-TLS-1.3 key exchange occurs only on full handshakes, this
necessitates adding a field to the SSL_SESSION object to carry the
group information across resumptions. The key exchange group in the
SSL_SESSION can also be relevant in TLS 1.3 when the resumption handshake
uses the "psk_ke" key-exchange mode, so also track whether a fresh key
exchange was done for TLS 1.3.
Since the new field is optional in the ASN.1 sense, there is no need
to increment SSL_SESSION_ASN1_VERSION (which incurs strong incompatibility
churn).
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14750)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15230)
Less tersely: converted SSL_get_options, SSL_set_options,
SSL_CTX_get_options and SSL_CTX_get_options to take and return uint64_t
since we were running out of 32 bits.
Fixes: 15145
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15230)
The EVP_PKEY_supports_digest_nid() is renamed to
EVP_PKEY_digestsign_supports_digest() and implemented
via EVP_DigestSignInit_ex().
Fixes#14343
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15198)
TLS 1.3 allows for the "psk_ke" and "psk_dhe_ke" key-exchange modes.
Only the latter mode introduces a new ephemeral (Diffie-Hellman)
key exchange, with the PSK being the only key material used in the
former case.
It's a compliance requirement of RFC 8446 that the server MUST NOT
send a KeyShareEntry when using the "psk_ke" mode, but prior to
this commit we would send a key-share based solely on whether the
client sent one. This bug goes unnoticed in our internal test suite
since openssl communicating with openssl can never negotiate the
PSK-only key-exchange mode. However, we should still be compliant
with the spec, so check whether the DHE mode was offered and don't
send a key-share if it wasn't.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14749)
It's a MUST-level requirement that if the client sends a pre_shared_key
extension not accompanied by a psk_key_exchange_modes extension, the
server must abort the handshake. Prior to this commit the server
would continue on.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14749)
This helps compensating for deprecated functions such as HMAC()
and reduces clutter in the crypto lib, apps, and tests.
Also fixes memory leaks in generate_cookie_callback() of apps/lib/s_cb.c.
and replaces 'B<...>' by 'I<...>' where appropriate in HMAC.pod
Partially fixes#14628.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14664)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15167)
libimplementations.a was a nice idea, but had a few flaws:
1. The idea to have common code in libimplementations.a and FIPS
sensitive helper functions in libfips.a / libnonfips.a didn't
catch on, and we saw full implementation ending up in them instead
and not appearing in libimplementations.a at all.
2. Because more or less ALL algorithm implementations were included
in libimplementations.a (the idea being that the appropriate
objects from it would be selected automatically by the linker when
building the shared libraries), it's very hard to find only the
implementation source that should go into the FIPS module, with
the result that the FIPS checksum mechanism include source files
that it shouldn't
To mitigate, we drop libimplementations.a, but retain the idea of
collecting implementations in static libraries. With that, we not
have:
libfips.a
Includes all implementations that should become part of the FIPS
provider.
liblegacy.a
Includes all implementations that should become part of the legacy
provider.
libdefault.a
Includes all implementations that should become part of the
default and base providers.
With this, libnonfips.a becomes irrelevant and is dropped.
libcommon.a is retained to include common provider code that can be
used uniformly by all providers.
Fixes#15157
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15171)
Removed error codes, and the mention of the functions.
This removal is already documented in the CHANGES doc.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15140)
This option is only useful for the client, but it was previously
marked as only being applicable for servers.
Correct the entry to properly mark it as client-only, and update the
s_server/s_client manuals accordingly.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15127)
Previously we would set SSL_OP_LEGACY_SERVER_CONNECT by default in
SSL_CTX_new(), to allow connections to legacy servers that did not
implement RFC 5746.
It has been more than a decade since RFC 5746 was published, so
there has been plenty of time for implmentation support to roll out.
Change the default behavior to be to require peers to support
secure renegotiation. Existing applications that already cleared
SSL_OP_LEGACY_SERVER_CONNECT will see no behavior change, as
re-clearing the flag is just a little bit of redundant work.
The old behavior is still available by explicitly setting the flag
in the application.
Also remove SSL_OP_LEGACY_SERVER_CONNECT from SSL_OP_ALL, for
similar reasons.
Document the behavior change in CHANGES.md, and update the
SSL_CTX_set_options() and SSL_CONF_cmd manuals to reflect the change
in default behavior.
Fixes: 14848
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15127)
`strdup(propq)` failure is doing a `goto err;` from where `SSL_CTX_free` is called.
The possible call is made before reference and lock fields setup.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/15052)
In TLS we process received messages like this:
1) Read Message Header
2) Validate and transition state based on received message type
3) Read Message Body
4) Process Message
In DTLS we read messages like this:
1) Read Message Header and Body
2) Validate and transition state based on received message type
3) Process Message
The difference is because of the stream vs datagram semantics of the
underlying transport.
In both TLS and DTLS we were doing finished MAC processing as part of
reading the message body. This means that in DTLS this was occurring
*before* the state transition has been validated. A crash was occurring
in DTLS if a Finished message was sent in an invalid state due to
assumptions in the code that certain variables would have been setup by
the time a Finished message arrives.
To avoid this problem we shift the finished MAC processing to be after
the state transition in DTLS.
Thanks to github user @bathooman for reporting this issue.
Fixes#14906
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14930)
One was related to probing for the combination of signature and hash
algorithm together. This is currently not easily possible. The TODO(3.0)
is converted to a normal comment and I've raised the problem as issue
number #14885 as something to resolve post 3.0.
The other TODO was a hard coded limit on the number of groups that could
be registered. This has been amended so that there is no limit.
Fixes#14333
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14886)
Add a "where did this EVP_{CIPHER,MD} come from" flag: global, via fetch,
or via EVP_{CIPHER,MD}_meth_new. Update EVP_{CIPHER,MD}_free to handle all
three origins. The flag is deliberately right before some function pointers,
so that compile-time failures (int/pointer) will occur, as opposed to
taking a bit in the existing "flags" field. The "global variable" flag
is non-zero, so the default case of using OPENSSL_zalloc (for provider
ciphers), will do the right thing. Ref-counting is a no-op for
Make up_ref no-op for global MD and CIPHER objects
Deprecate EVP_MD_CTX_md(). Added EVP_MD_CTX_get0_md() (same semantics as
the deprecated function) and EVP_MD_CTX_get1_md(). Likewise, deprecate
EVP_CIPHER_CTX_cipher() in favor of EVP_CIPHER_CTX_get0_cipher(), and add
EVP_CIPHER_CTX_get1_CIPHER().
Refactor EVP_MD_free() and EVP_MD_meth_free() to call new common
evp_md_free_int() function.
Refactor EVP_CIPHER_free() and EVP_CIPHER_meth_free() to call new common
evp_cipher_free_int() function.
Also change some flags tests to explicit test == or != zero. E.g.,
if (flags & x) --> if ((flags & x) != 0)
if (!(flags & x)) --> if ((flags & x) == 0)
Only done for those lines where "get0_cipher" calls were made.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14193)
It's possible to set an invalid protocol list that will be sent in a
ClientHello. This validates the inputs to make sure this does not
happen.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14815)
It has always been the case that KTLS is not compiled by default. However
if it is compiled then it was automatically used unless specifically
configured not to. This is problematic because it avoids any crypto
implementations from providers. A user who configures all crypto to use
the FIPS provider may unexpectedly find that TLS related crypto is actually
being performed outside of the FIPS boundary.
Instead we change KTLS so that it is disabled by default.
We also swap to using a single "option" (i.e. SSL_OP_ENABLE_KTLS) rather
than two separate "modes", (i.e. SSL_MODE_NO_KTLS_RX and
SSL_MODE_NO_KTLS_TX).
Fixes#13794
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14799)
This change includes swapping the PUT and SPT configuration,
includes of sys/stat.h and sys/types.h in the correct scope
to be picked up by SPT definitions.
Fixes: #14698Fixes: #14734
CLA: The author has the permission to grant the OpenSSL Team the right to use this change.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14736)
The comment is bogus as that call for NID_sha256 does not do
anything else than looking up the string in an internal table.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14703)
Instead, they should be cached per SSL_CTX.
This also addresses a threading issue where multiple attempts to write the
same location occur. The last one winning. Under 1.1.1, this wasn't an issue
but under 3.0 with library contexts, the results can and will be different.
Fixes#13456
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14715)
Following on from CVE-2021-3449 which was caused by a non-zero length
associated with a NULL buffer, other buffer/length pairs are updated to
ensure that they too are always in sync.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
As the variable peer_sigalgslen is not cleared on ssl rehandshake, it's
possible to crash an openssl tls secured server remotely by sending a
manipulated hello message in a rehandshake.
On such a manipulated rehandshake, tls1_set_shared_sigalgs() calls
tls12_shared_sigalgs() with the peer_sigalgslen of the previous
handshake, while the peer_sigalgs has been freed.
As a result tls12_shared_sigalgs() walks over the available
peer_sigalgs and tries to access data of a NULL pointer.
This issue was introduced by c589c34e61 (Add support for the TLS 1.3
signature_algorithms_cert extension, 2018-01-11).
Signed-off-by: Peter Kästle <peter.kaestle@nokia.com>
Signed-off-by: Samuel Sapalski <samuel.sapalski@nokia.com>
CVE-2021-3449
CLA: trivial
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Some functions that lock things are void, so we just return early.
Also make ossl_namemap_empty return 0 on error. Updated the docs, and added
some code to ossl_namemap_stored() to handle the failure, and updated the
tests to allow for failure.
Fixes: #14230
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14238)
While all the standardized groups would fit within the old limit,
with the addition of providers, some might want to experiment with
new and unstandardized groups. As such, their names might not fit
within the old limit.
Define it as GROUP_NAME_BUFFER_LENGTH with value 64.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14502)
A trivial PR to remove some commonly repeated words. It looks like this is
not the first PR to do this.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14420)
If we have TLSv1.3 enabled then we must have at least one TLSv1.3 capable
group available. This check was not always working
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/14430)
If the EVP_MD_CTX_ctrl is deprecated the code will
generate deprecation warnings. So there is no point in marking
all EVP_MD_CTX_ctrl() calls with TODOs.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14367)
In ssl_create_cipher_list() we make a pass through the ciphers to
remove those which are disabled in the current libctx. We are
careful to not include such disabled TLS 1.3 ciphers in the final
consolidated cipher list that we produce, but the disabled ciphers
are still kept in the separate stack of TLS 1.3 ciphers associated
with the SSL or SSL_CTX in question. This leads to confusing
results where a cipher is present in the tls13_cipherlist but absent
from the actual cipher list in use. Keep the books in order and
remove the disabled ciphers from the 1.3 cipherlist at the same time
we skip adding them to the active cipher list.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12037)
Additional renames done in encoder and decoder implementation
to follow the style.
Fixes#13622
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14155)
The low level DH API has two functions for checking parameters:
DH_check_ex() and DH_check_params_ex(). The former does a "full" check,
while the latter does a "quick" check. Most importantly it skips the
check for a safe prime. We're ok without using safe primes here because
we're doing ephemeral DH.
Now that libssl is fully using the EVP API, we need a way to specify that
we want a quick check instead of a full check. Therefore we introduce
EVP_PKEY_param_check_quick() and use it.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/14146)
Using ERR_LIB_* causes the error output to say 'reason(n)' instead of
the name of the sub-library in question.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14152)
The low level SRP implementation has been deprecated with no replacement.
Therefore the libssl level APIs need to be similarly deprecated.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14132)
The OTC decided that all low level APIs should be deprecated. This extends
to SRP, even though at the current time there is no "EVP" interface to it.
This could be added in a future release.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14132)
This field has not been used since #3858 was merged in 2017 when we
moved to a table-based lookup for certificate type properties instead of
an index-based one.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/13991)
The existing names such as EVP_PKEY_param_fromdata_settable were a bit
confusing since the 'param' referred to key params not OSSL_PARAM. To simplify
the interface a 'selection' parameter will be passed instead. The
changes are:
(1) EVP_PKEY_fromdata_init() replaces both EVP_PKEY_key_fromdata_init() and EVP_PKEY_param_fromdata_init().
(2) EVP_PKEY_fromdata() has an additional selection parameter.
(3) EVP_PKEY_fromdata_settable() replaces EVP_PKEY_key_fromdata_settable() and EVP_PKEY_param_fromdata_settable().
EVP_PKEY_fromdata_settable() also uses a selection parameter.
Fixes#12989
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14076)
We should no longer be relying on compile time checks in libssl for
the availability of crypto algorithms. The availability of crypto
algorithms should be determined at runtime based on what providers have
been loaded.
Fixes#13616
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13916)
We may have compiled in sigalg values that we can't support at runtime.
Make sure we only use sigalgs that are actually enabled.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13916)
By recognising the nist group names directly we can avoid having to call
EC_curve_nist2nid in libssl, which is not available in a no-ec build.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13916)
With 3.0 we need to know whether algs are available at run time not
at compile time. Actually the code as written is sufficient to do this,
so we can simply remove the guards.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13916)
In 1.1.1 and below we would check for the availability of certain
algorithms based on compile time guards. However with 3.0 this is no
longer sufficient. Some algorithms that are unavailable at compile time
may become available later if 3rd party providers are loaded. Similarly,
algorithms that exist in our built-in providers at compile time may not
be available at run time if those providers are not loaded.
Fixes#13184
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13916)
The supported groups code was checking the OPENSSL_NO_EC and
OPENSSL_NO_DH guards in order to work, and the list of default groups was
based on those guards. However we now need it to work even in a no-ec
and no-dh build, because new groups might be added from providers.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13916)
The default supported groups code was disabled in the event of a build
with no-ec and no-dh. However now that providers can add there own
groups (which might not fit into either of these categories), this is
no longer appropriate.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13916)
This removes man unnecessary OPENSSL_NO_DH guards from libssl. Now that
libssl is entirely using the EVP APIs and implementations can be plugged
in via providers it is no longer needed to disable DH at compile time in
libssl. Instead it should detect at runtime whether DH is available from
the loaded providers.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13916)
We had a couple of stray references to OpenSSL1.2 in libssl. We just
reword the comments to remove those references without changing any
behaviour.
The first one in t1_lib.c is a technical non-compliance in the TLSv1.3
spec where, under some circumstances, we offer DSA sigalgs even in a
ClientHello that eventually negotiates TLSv1.3. We explicitly chose to
accept this behaviour in 1.1.1 and we're not planning to change it for
3.0.
The second one in s3_lib.c is regarnding the behaviour of
SSL_set_tlsext_host_name(). Technically you shouldn't be able to call
this from a server - but we allow it and just ignore it rather than
raising an error. The TODO suggest we consider raising an error instead.
However, with 3.0 we are trying to minimise breaking changes so I suggest
not making this change now.
Fixes#13161
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/14037)
The client-side cert verification callback function may not only return
as usual for success or 0 for failure, but also -1,
typically on failure verifying the server certificate.
This makes the handshake suspend and return control to the calling application
with SSL_ERROR_WANT_RETRY_VERIFY.
The app can for instance fetch further certificates or cert status information
needed for the verification.
Calling SSL_connect() again resumes the connection attempt
by retrying the server certificate verification step.
This process may even be repeated if need be.
The core implementation of the feature is in ssl/statem/statem_clnt.c,
splitting tls_process_server_certificate() into a preparation step
that just copies the certificates received from the server to s->session->peer_chain
(rather than having them in a local variable at first) and returns to the state machine,
and a post-processing step in tls_post_process_server_certificate() that can be repeated:
Try verifying the current contents of s->session->peer_chain basically as before,
but give the verification callback function the chance to pause connecting and
make the TLS state machine later call tls_post_process_server_certificate() again.
Otherwise processing continues as usual.
The documentation of the new feature is added to SSL_CTX_set_cert_verify_callback.pod
and SSL_want.pod.
This adds two tests:
* A generic test in test/helpers/handshake.c
on the usability of the new server cert verification retry feature.
It is triggered via test/ssl-tests/03-custom_verify.cnf.in (while the bulky auto-
generated changes to test/ssl-tests/03-custom_verify.cnf can be basically ignored).
* A test in test/sslapitest.c that demonstrates the effectiveness of the approach
for augmenting the cert chain provided by the server in between SSL_connect() calls.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13906)
libssl at the moment downgrades an EVP_PKEY to an EC_KEY object in order
to get the conv form and field type. Instead we provide EVP_PKEY level
functions to do this.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13139)
Co-author: Richard Levitte <levitte@openssl.org>
Co-author: Tomas Mraz <tmraz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13139)
Whenever we set a private key in libssl, we first found the certificate
that matched the key algorithm. Then we copied the key parameters from the
private key into the public key for the certficate before finally checking
that the private key matched the public key in the certificate. This makes
no sense! Part of checking the private key is to make sure that the
parameters match. It seems that this code has been present since SSLeay.
Perhaps at some point it made sense to do this - but it doesn't any more.
We remove that piece of code altogether. The previous code also had the
undocumented side effect of removing the certificate if the key didn't
match. This makes sense if you've just overwritten the parameters in the
certificate with bad values - but doesn't seem to otherwise. I've also
removed that error logic.
Due to issue #13893, the public key associated with the certificate is
always a legacy key. EVP_PKEY_copy_parameters will downgrade the "from"
key to legacy if the target is legacy, so this means that in libssl all
private keys were always downgraded to legacy when they are first set
in the SSL/SSL_CTX. Removing the EVP_PKEY_copy_parameters code has the
added benefit of removing that downgrade.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13899)
Linux kernel is going to support ChaCha20-Poly1305 in TLS offload.
Add support for this cipher.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13475)
To clarify the purpose of these two calls rename them to
EVP_CIPHER_CTX_get_original_iv and EVP_CIPHER_CTX_get_updated_iv.
Also rename the OSSL_CIPHER_PARAM_IV_STATE to OSSL_CIPHER_PARAM_UPDATED_IV
to better align with the function name.
Fixes#13411
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13870)
Update constant to maximum permitted by RFC 8446
Fixes#13868
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13874)
Fixes#13183
From the original issue report, before this commit, on master and on
1.1.1, the issue can be detected with the following steps:
- Start with a default SSL_CTX, initiate a TLS 1.3 connection with SNI,
"Accept" count of default context gets incremented
- After servername lookup, "Accept" count of default context gets
decremented and that of SNI context is incremented
- Server sends a "Hello Retry Request"
- Client sends the second "Client Hello", now again "Accept" count of
default context is decremented. Hence giving a negative value.
This commit fixes it by adding a check on `s->hello_retry_request` in
addition to `SSL_IS_FIRST_HANDSHAKE(s)`, to ensure the counter is moved
only on the first ClientHello.
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13297)
