This fixes a race condition where the index to the cache location was found
under a read lock and a later write lock set the cache entry. The issue being
that two threads could get the same location index and then fight each other
over writing the cache entry. The most likely outcome is a memory leak,
however it would be possible to set up an invalid cache entry.
The operation cache was a fixed sized array, once full an assertion failed.
The other fix here is to convert this to a stack. The code is simplified and
it avoids a cache overflow condition.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14062)
The EVP_PKEY operation_cache caches references to provider side key
objects that have previously been exported for this EVP_PKEY, and their
associated key managers. The cache may be updated from time to time as the
EVP_PKEY is exported to more providers. Since an EVP_PKEY may be shared by
multiple threads simultaneously we must be careful to ensure the cache
updates are locked.
Fixes#13818
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13987)
This introduces a separate activation counter, and the function
ossl_provider_deactivate() for provider deactivation.
Something to be noted is that if the reference count goes down to
zero, we don't care if the activation count is non-zero (i.e. someone
forgot to call ossl_provider_deactivate()). Since there are no more
references to the provider, it doesn't matter.
The important thing is that deactivation doesn't remove the provider
as long as there are references to it, for example because there are
live methods associated with that provider, but still makes the
provider unavailable to create new methods from.
Fixes#13503Fixes#12157
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13661)
Refactor them into inline ossl_ends_with_dirsep function in
internal/cryptlib.h.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13306)
doc/internal/man7/deprecation.pod was unclear in some areas, and
included general documentation that has no place there.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13240)
This removes a TODO.
This function is not needed since any place that needs to do the
conversion normally has a special case name2nid table.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13202)
This change makes the naming more consistent, because three different terms
were used for the same thing. (The term libctx was used by far most often.)
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12621)
Many of the new types introduced by OpenSSL 3.0 have an OSSL_ prefix,
e.g., OSSL_CALLBACK, OSSL_PARAM, OSSL_ALGORITHM, OSSL_SERIALIZER.
The OPENSSL_CTX type stands out a little by using a different prefix.
For consistency reasons, this type is renamed to OSSL_LIB_CTX.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12621)
ECX_KEY was not meant for public consumption, it was only to be
accessed indirectly via EVP routines. However, we still need internal
access for our decoders.
This partially reverts 7c664b1f1bFixes#12880
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12956)
This permits the default trio of DRBGs to have their type and parameters set
using configuration.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12931)
This is purely to allow exporting without having to repeatedly specify
the keymgmt and keydata from the EVP_PKEY.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12853)
add various checks for malformedness to static check_chain_extensions() in x509_vfc.c
improve error reporting of X509v3_cache_extensions() in v3_purp.c
add error reporting to x509_init_sig_info() in x509_set.c
improve static setup_dp() and related functions in v3_purp.c and v3_crld.c
add test case for non-conforming cert from https://tools.ietf.org/html/rfc8410#section-10.2
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12478)
* Use strenghtened cert chain building, verifying chain using optional trust store
while making sure that no certificate status (e.g., CRL) checks are done
* Use OSSL_CMP_certConf_cb() by default and move its doc to OSSL_CMP_CTX_new.pod
* Simplify certificate and cert store loading in apps/cmp.c
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12741)
PEM_write_bio_PrivateKey_traditional() didn't handle provider-native
keys very well. Originally, it would simply use the corresponding
encoder, which is likely to output modern PEM (not "traditional").
PEM_write_bio_PrivateKey_traditional() is now changed to try and get a
legacy copy of the input EVP_PKEY, and use that copy for traditional
output, if it has such support.
Internally, evp_pkey_copy_downgraded() is added, to be used when
evp_pkey_downgrade() is too intrusive for what it's needed for.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12738)
* Add -own_trusted option to CMP app
* Add OSSL_CMP_CTX_build_cert_chain()
* Add optional trust store arg to ossl_cmp_build_cert_chain()
* Extend the tests in cmp_protect_test.c and the documentation accordingly
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12791)
Also remove not really to-the-point error message if call fails in apps/cmp.c
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11808)
Added der_writer functions for writing octet string primitives.
Generate OID's for key wrapping algorithms used by X942 KDF.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12554)
This change applies the recommendation of the Linux Documentation Project
to the documentation files of OpenSSL. Additionally, util/find-doc-nits
was updated accordingly.
The change follows a suggestion of mspncp on https://github.com/openssl/openssl/pull/12370
and incoporates the requested changes on the pull request
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/12460)
CLA: trivial
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/12320)
The new naming scheme consistently usese the `OSSL_FUNC_` prefix for all
functions which are dispatched between the core and providers.
This change includes in particular all up- and downcalls, i.e., the
dispatched functions passed from core to provider and vice versa.
- OSSL_core_ -> OSSL_FUNC_core_
- OSSL_provider_ -> OSSL_FUNC_core_
For operations and their function dispatch tables, the following convention
is used:
Type | Name (evp_generic_fetch(3)) |
---------------------|-----------------------------------|
operation | OSSL_OP_FOO |
function id | OSSL_FUNC_FOO_FUNCTION_NAME |
function "name" | OSSL_FUNC_foo_function_name |
function typedef | OSSL_FUNC_foo_function_name_fn |
function ptr getter | OSSL_FUNC_foo_function_name |
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12222)
Fixes a problem where global properties don't work with a NULL query.
Specifying an algorithm with a NULL query ignores the default properties.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12123)
Provide a function to applications to query the capabilities that a
provider can perform.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11914)
as checking expected_sender and adding caPubs is not part of msg validation.
Also constify a couple of internal and public functions related to cmp_vfy.c
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11998)
Bugfix: allow using extraCerts contained in msg already while checking signature
Improve function name, simplify its return value, and update its documentation
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11998)
When a desired algorithm wasn't available, we didn't register anywhere
that an attempt had been made, with the result that next time the same
attempt was made, the whole process would be done again.
To avoid this churn, we register a bit for each operation that has
been queried in the libcrypto provider object, and test it before
trying the same query and method construction loop again.
If course, if the provider has told us not to cache, we don't register
this bit.
Fixes#11814
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11842)
Also update documentation and example code in openssl-cmp.pod.in
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11470)
The calls weren't quite right, as this function has changed its behaviour.
We also change the internal documentation of this function, and document
evp_pkey_downgrade().
Fixes#11549
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11550)
This library is meant to be small and quick. It's based on WPACKET,
which was extended to support DER writing. The way it's used is a
bit unusual, as it's used to write the structures backward into a
given buffer. A typical quick call looks like this:
/*
* Fill in this structure:
*
* something ::= SEQUENCE {
* id OBJECT IDENTIFIER,
* x [0] INTEGER OPTIONAL,
* y [1] BOOLEAN OPTIONAL,
* n INTEGER
* }
*/
unsigned char buf[nnnn], *p = NULL;
size_t encoded_len = 0;
WPACKET pkt;
int ok;
ok = WPACKET_init_der(&pkt, buf, sizeof(buf)
&& DER_w_start_sequence(&pkt, -1)
&& DER_w_bn(&pkt, -1, bn)
&& DER_w_boolean(&pkt, 1, bool)
&& DER_w_precompiled(&pkt, -1, OID, sizeof(OID))
&& DER_w_end_sequence(&pkt, -1)
&& WPACKET_finish(&pkt)
&& WPACKET_get_total_written(&pkt, &encoded_len)
&& (p = WPACKET_get_curr(&pkt)) != NULL;
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11450)
The catalyst for this is the difficult of passing BNs through the other
OSSL_PARAM APIs.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11390)
Certificate Management Protocol (CMP, RFC 4210) extension to OpenSSL
Also includes CRMF (RFC 4211) and HTTP transfer (RFC 6712).
Adds the CMP and CRMF API to libcrypto and the "cmp" app to the CLI.
Adds extensive documentation and tests.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11300)
Certificate Management Protocol (CMP, RFC 4210) extension to OpenSSL
Also includes CRMF (RFC 4211) and HTTP transfer (RFC 6712).
Adds the CMP and CRMF API to libcrypto and the "cmp" app to the CLI.
Adds extensive documentation and tests.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11142)
The find-doc-nits complains about non-zero word and about missing
line before =head1 which causes build failure.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11231)
Previously, evp-keymgmt_util_export_to_provider() took care of all
kinds of exports of EVP_PKEYs to provider side keys, be it from its
legacy key or from another provider side key. This works most of the
times, but there may be cases where the caller wants to be a bit more
in control of what sort of export happens when.
Also, when it's time to remove all legacy stuff, that job will be much
easier if we have a better separation between legacy support and
support of provided stuff, as far as we can take it.
This changes moves the support of legacy key to provider side key
export from evp-keymgmt_util_export_to_provider() to
evp_pkey_make_provided(), and makes sure the latter is called from all
EVP_PKEY functions that handle legacy stuff.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11074)
add CMP message validation and related tests; while doing so:
* add ERR_add_error_mem_bio() to crypto/err/err_prn.c
* move ossl_cmp_add_error_txt() as ERR_add_error_txt() to crypto/err/err_prn.c
* add X509_STORE_CTX_print_verify_cb() to crypto/x509/t_x509.c,
adding internally x509_print_ex_brief(), print_certs(), and print_store_certs()
* move {ossl_cmp_,}X509_STORE_get1_certs() to crypto/x509/x509_lu.c
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/10620)
in addition:
correct wording in doc, comments, and parameter names: self-signed -> self-issued where appropriate
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/10620)
in particular:
consolidate documentation of CMP logging and error reporting functions
fix compilation problem with clang on some platforms
rename OSSL_CMP_log etc. to ossl_cmp_log etc. since these macros are CMP-internal
move chopping of trailing separator to ossl_cmp_add_error_txt(), also fix handling of leading separator
internalize X509_print_ex_brief() as x509_print_ex_brief()
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/10620)
The recently introduced ossl_param_bld_to_param_ex() function is only
called by the unit tests.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11053)
The KEYMGMT libcrypto <-> provider interface currently makes a few
assumptions:
1. provider side domain parameters and key data isn't mutable. In
other words, as soon as a key has been created in any (loaded,
imported data, ...), it's set in stone.
2. provider side domain parameters can be strictly separated from the
key data.
This does work for the most part, but there are places where that's a
bit too rigid for the functionality that the EVP_PKEY API delivers.
Key data needs to be mutable to allow the flexibility that functions
like EVP_PKEY_copy_parameters promise, as well as to provide the
combinations of data that an EVP_PKEY is generally assumed to be able
to hold:
- domain parameters only
- public key only
- public key + private key
- domain parameters + public key
- domain parameters + public key + private key
To remedy all this, we:
1. let go of the distinction between domain parameters and key
material proper in the libcrypto <-> provider interface.
As a consequence, functions that still need it gain a selection
argument, which is a set of bits that indicate what parts of the
key object are to be considered in a specific call. This allows
a reduction of very similar functions into one.
2. Rework the libcrypto <-> provider interface so provider side key
objects are created and destructed with a separate function, and
get their data filled and extracted in through import and export.
(future work will see other key object constructors and other
functions to fill them with data)
Fixes#10979
squash! Redesign the KEYMGMT libcrypto <-> provider interface - the basics
Remedy 1 needs a rewrite:
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11006)
Replace "=for openssl foreign manuals" with simpler syntax, it looks
like the "=for openssl ifdef" construct.
Fix some broken L<> links; add some missing foreign references and fixed
some typo's.
The WARNINGS in dhparam referred to non-existant commands so reword it.
Fixes#10109
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10256)
These were initially added as internal functions only. However they will
also need to be used by libssl as well. Therefore it make sense to move
them into the public API.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10864)
To aviod leaking size information when passing private value using the
OSSL_PARAM builder, a padded BN call is required.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10840)
The code to ensure that an EVP_PKEY is exported to providers is
repeated all over the place, enough that copying it again has the
usual future hazards with code copying.
Instead, we refactor that code into one function,
evp_pkey_make_provided(), and make sure to use that everywhere.
It relies on the creation of EVP_PKEY_CTX to figure out facts about
the input key, should it need to.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10850)
Also, turn missing L<foo(3)> into foo(3)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10104)
This was originally the private add_names_to_namemap() in
crypto/evp/evp_fetch.c, but made more generally useful.
To make for more consistent function naming, ossl_namemap_add() and
ossl_namemap_add_n() are renamed to ossl_namemap_add_name() and
ossl_namemap_add_name_n().
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10394)
This adds ossl_namemap_empty(), to detect if a namemap is empty and
can thereby be pre-populated.
This also affects the way legacy NIDs are looked up in
evp_cipher_from_dispatch() and evp_md_from_dispatch(). Instead of
trying to find the NID directly, look up the legacy method structure
and grab the NID from there. The reason is that NIDs can be aliases
for other NIDs, which looks like a clash even if wasn't really one.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8984)
The property query cache was not reference count aware and this could cause
problems if the property store removes an algorithm while it is being returned
from an asynchronous query. This change makes the cache reference count aware
and avoids disappearing algorithms.
A side effect of this change is that the reference counts are now owned by the
cache and store.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10408)
Add sections (almost always "(3)" to L<> references that were missing
them. Among other things, this
Fixes: #10226
Also remove two references to non-existant manpages that have never
existed, and with the 3.0 structure, are unlikely to do so.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10240)
OpenSSL uses some POD directives masquerading as 'comment'
('=for comment' etc). This is abusive and confusing. Instead, we use
our own keyword.
=for openssl whatever
=begin openssl
whatever
=end openssl
(we have never used the multiline form, but might start one day)
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10048)
The end up in providers/common/include/prov/.
All inclusions are adjusted accordingly.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10088)
This modifies the treatment of algorithm name strings to allow
multiple names separated with colons.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/8985)
Also patch find-doc-nits to ignore a Microsoft trademark and not
flag it as a spelling error.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10023)
Details from man-pages(7) that are used:
Formatting conventions for manual pages describing functions
...
Variable names should, like argument names, be specified in italics.
...
Formatting conventions (general)
...
Special macros, which are usually in uppercase, are in bold.
Exception: don't boldface NULL.
...
Furthermore, for TYPE used as a placeholder for types and correponding
part of function names, we extrapolate that it's both a type and a
variable, and should therefore be bold (typical for types and function
names) and italic (typical for variables). POD processors don'e know
this, so we have to help them along. Therefore:
SPARSE_ARRAY_OF(TYPE) => B<SPARSE_ARRAY_OF>(B<I<TYPE>>)
ossl_sa_TYPE_num() => B<ossl_sa_I<TYPE>_num>()
TYPE => B<I<TYPE>>
There are some other less typical uses where one simply has to give
formatting some extra though.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10041)
Apart from public and internal header files, there is a third type called
local header files, which are located next to source files in the source
directory. Currently, they have different suffixes like
'*_lcl.h', '*_local.h', or '*_int.h'
This commit changes the different suffixes to '*_local.h' uniformly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)
Currently, there are two different directories which contain internal
header files of libcrypto which are meant to be shared internally:
While header files in 'include/internal' are intended to be shared
between libcrypto and libssl, the files in 'crypto/include/internal'
are intended to be shared inside libcrypto only.
To make things complicated, the include search path is set up in such
a way that the directive #include "internal/file.h" could refer to
a file in either of these two directoroes. This makes it necessary
in some cases to add a '_int.h' suffix to some files to resolve this
ambiguity:
#include "internal/file.h" # located in 'include/internal'
#include "internal/file_int.h" # located in 'crypto/include/internal'
This commit moves the private crypto headers from
'crypto/include/internal' to 'include/crypto'
As a result, the include directives become unambiguous
#include "internal/file.h" # located in 'include/internal'
#include "crypto/file.h" # located in 'include/crypto'
hence the superfluous '_int.h' suffixes can be stripped.
The files 'store_int.h' and 'store.h' need to be treated specially;
they are joined into a single file.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)
We have a few pages where part of function names can be considered
variable. There are no normative guidelines for such a case, but if
we draw from the formatting convention of variable and argument names,
we can draw the conclusion that this variable part should be italized,
within already given conventions. In other words, we need to help the
POD processor along in cases like these:
SPARSE_ARRAY_OF(TYPE)
ossl_sa_TYPE_num()
These need explicit formatting:
B<SPARSE_ARRAY_OF>(I<TYPE>)
B<ossl_sa_I<TYPE>_num>()
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10034)
It's all in the details, from man-pages(7):
Formatting conventions for manual pages describing functions
...
Variable names should, like argument names, be specified in italics.
...
Formatting conventions (general)
...
Special macros, which are usually in uppercase, are in bold.
Exception: don't boldface NULL.
...
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10034)
Also includes CRMF (RFC 4211) and HTTP transfer (RFC 6712)
CMP and CRMF API is added to libcrypto, and the "cmp" app to the openssl CLI.
Adds extensive man pages and tests. Integration into build scripts.
Incremental pull request based on OpenSSL commit 8869ad4a39 of 2019-04-02
4th chunk: CMP context/parameters and utilities
in crypto/cmp/cmp_ctx.c, crypto/cmp/cmp_util.c, and related files
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9107)
Multiple names per implementation is already supported in the namemap,
but hasn't been used yet. However, as soon as we have multiple names,
we will get an issue with what name should be saved in the method.
The solution is to not save the name itself, but rather the number
it's associated with. This number is supposed to be unique for each
set of names, and we assume that algorithm names are globally unique,
i.e. there can be no name overlap between different algorithm types.
Incidently, it was also found that the 'get' function used by
ossl_construct_method() doesn't need all the parameters it was given;
most of what it needs, it can now get through the data structure given
by the caller of ossl_construct_method(). As a consequence,
ossl_construct_method() itself doesn't need all the parameters it was
given either.
There are some added internal functions that are expected to disappear
as soon as legacy code is removed, such as evp_first_name() and
ossl_namemap_num2name().
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9897)
KEYMGMT methods were attached to other methods after those were fully
created and registered, thereby creating a potential data race, if two
threads tried to create the exact same method at the same time.
Instead of this, we change the method creating function to take an
extra data parameter, passed all the way from the public fetching
function. In the case of EVP_KEYEXCH, we pass all the necessary data
that evp_keyexch_from_dispatch() needs to be able to fetch the
appropriate KEYMGMT method on the fly.
Fixes#9592
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9678)
