We did not have a test of the low level CMAC APIs so we add one. This is
heavily based on the HMAC test.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11972)
EVP_Cipher() is a very low level routine that directly calls the
underlying cipher function. It's return value semantics are very odd.
Depending on the type of cipher 0 or -1 is returned on error. We should
just check for <=0 for a failure.
Fixes#11957
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11972)
If the CMAC_CTX is partially initialised then we make a note of this so
that future operations will fail if the initialisation has not been
completed.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11972)
VERBOSE_FAILURES_ONLY (VFO): verbose output only of failed (sub-)tests
VERBOSE_FAILURES_PROGRESS (VFP): in addition summary for passed tests
This adds a workaroud for TAP::Parser not coping well with indentation.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12088)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12042)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12042)
Fixes#11742Fixes#11764
The newer RSA sp800-56b algorithm is being used for the normal case of a non multiprime key of at least length 2048.
Insecure key lengths and mutltiprime RSA will use the old method.
Bad public exponents are no longer allowed (i.e values less than 65537 or even). Values such as 2 that would cause a infinite loop now result in an error. The value of 3 has been marked as deprecated but is still allowed for legacy purposes.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11765)
Abort renegotiation if server receives client hello with Extended Master
Secret extension dropped in comparison to the initial session.
Fixes#9754
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12045)
DH_get_1024_160() and DH_get_2048_224() return parameters from
RFC5114. Those parameters include primes with known small subgroups,
making them unsafe. Change the code to use parameters from
RFC 2409 and RFC 3526 instead (group 2 and 14 respectively).
This patch also adds automatic selection of 4096 bit params for 4096 bit
RSA keys
Signed-off-by: Hubert Kario <hkario@redhat.com>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12061)
'dhparam' can't be completely rewritten in terms of EVP_PKEY functions
yet, because we lack X9.42 support. However, we do when generating,
but forgot to extract a DH pointer with EVP_PKEY_get0_DH().
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/12048)
Using a parameter EVP_PKEY for key generation with EVP_PKEY routines
works a little differently than the raw DSA routines that were used
before.
While fixing that, clean away all remaining use of the DSA type, which
simplifies the code a bit more.
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/12048)
In EVP_PKEY_METHOD code, the backend initializes ctx->keygen_info.
With provider side code, it's not possible to reach back into the
EVP_PKEY_CTX in the same manner, so we need to make that
initialization in the central generation function, EVP_PKEY_gen().
This isn't quite compatible with the idea that keygen_info could have
an arbitrary amount of elements, but since all our legacy backends use
exactly two elements, that's what we go for.
Fixes#12047
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/12048)
The support of new algos is added by converting code to use
helper functions found in ktls.h.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11589)
while RFC 2312 refers to S/MIME it doesn't actually declare any groups,
RFC 2412 actually talks about DH extensively and the group
defined in the code below is defined on page 47 of it
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12076)
Also make sure that the test do not 'pass' if their initialization fails.
Leave out the expensive parts of DSA key gen and RSA keygen for efficiency.
Fix use of the new CA configuration file test/ca-and-certs.cnf.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11733)
Among others, make clear that OSSL_STORE_close() meanwhile does nothing on NULL.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11733)
Output that's supposed to be understood by a TAP parser gets its own
BIOs (|tap_out| and |tap_err|), and is only used internally within
testutils. |bio_out| and |bio_err| is now only used for output that
shouldn't be parsed by the TAP parser, and all output written to those
BIOs are therefore always made to look like comments (it gets prefixed
with "# ").
Indentation and prefixing with "# " is reworked to use BIO_f_prefix(),
which allows us to throw away the internal BIO_f_tap().
The indentation level is now adjusted via a special function.
Fixes#12054
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12057)
Also documents that they meanwhile try all IP addresses resolved for a given domain name
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12017)
We were downgrading to legacy keys at various points in libssl in
order to get or set an encoded point. Now that the encoded point
functions work with provided keys this is no longer necessary.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11898)
An ECX key doesn't have any parameters associated with it. Therefore it
always has all the parameters it needs, and the "has" function should
return 1 if asked about parameters. Without this
EVP_PKEY_missing_parameters() fails for ECX keys.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11898)
Even if there is no data to import we should still create an empty key.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11898)
EVP_PKEY_[get1|set1]_tls_encodedpoint() only worked if an ameth was present
which isn't the case for provided keys. Support has been added to dh,
ec and ecx keys.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11898)
If we hit the error path and create_ssl_ctx_pair has been passed a
pre-created SSL_CTX then we could end up with a double free.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11834)
If sigalgs are not present we should not offer or accept them. We should
test that we handle this correctly.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11834)
The filtering provider can be used to place a filter in front of the
default provider. Initially to filter out certain algorithms from being
available for test purposes.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11834)
Implement a function which enables us to get hold of the provider ctx
for a loaded provider.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11834)
This is useful to get hold of the low-level dispatch tables. This could
be used to create a new provider based on an existing one.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11834)
We should confirm that Signature Algorithms are actually available
through the loaded providers before we offer or select them.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11834)
This mode is severely untested and unmaintained, is seems not to be
used very much.
Closes#4679Closes#6292
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12023)
This is a follow-up of PR #12013.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12026)
Discussions are ongoing but the OMC has approved the in-principle addition
of these algorithms to the upcoming FIPS validation.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12020)
