When an SSL's context is swtiched from a ticket-enabled context to
a ticket-disabled context in the servername callback, no session-id
is generated, so the session can't be resumed.
If a servername callback changes the SSL_OP_NO_TICKET option, check
to see if it's changed to disable, and whether a session ticket is
expected (i.e. the client indicated ticket support and the SSL had
tickets enabled at the time), and whether we already have a previous
session (i.e. s->hit is set).
In this case, clear the ticket-expected flag, remove any ticket data
and generate a session-id in the session.
If the SSL hit (resumed) and switched to a ticket-disabled context,
assume that the resumption was via session-id, and don't bother to
update the session.
Before this fix, the updated unit-tests in 06-sni-ticket.conf would
fail test #4 (server1 = SNI, server2 = no SNI).
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/1529)
Rename tls1_get_curvelist to tls1_get_grouplist, change to void as
it can never fail and remove unnecessary return value checks. Clean
up the code.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/=4412)
Instead of storing supported groups in on-the-wire format store
them as parsed uint16_t values. This simplifies handling of groups
as the values can be directly used instead of being converted.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4406)
In OpenSSL 1.1.0, when there were no extensions added to the ServerHello,
we did not write the extension data length bytes to the end of the
ServerHello; this is needed for compatibility with old client implementations
that do not support TLS extensions (such as the default configuration of
OpenSSL 0.9.8). When ServerHello extension construction was converted
to the new extensions framework in commit
7da160b0f4, this behavior was inadvertently
limited to cases when SSLv3 was negotiated (and similarly for ClientHellos),
presumably since extensions are not defined at all for SSLv3. However,
extensions for TLS prior to TLS 1.3 have been defined in separate
RFCs (6066, 4366, and 3546) from the TLS protocol specifications, and as such
should be considered an optional protocol feature in those cases.
Accordingly, be conservative in what we send, and skip the extensions block
when there are no extensions to be sent, regardless of the TLS/SSL version.
(TLS 1.3 requires extensions and can safely be treated differently.)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4296)
Removed e_os.h from all bar three headers (apps/apps.h crypto/bio/bio_lcl.h and
ssl/ssl_locl.h).
Added e_os.h into the files that need it now.
Directly reference internal/nelem.h when required.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4188)
Force non-empty padding extension.
When enabled, force the padding extension to be at least 1 byte long.
WebSphere application server cannot handle having an empty
extension (e.g. EMS/EtM) as the last extension in a client hello.
This moves the SigAlgs extension last for TLSv1.2 to avoid this
issue.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3921)
Commit 02f0274e8c moved ALPN processing
into an extension finalization function, as the only documented ordering
requirement from previous commits was that ALPN processing occur after
SNI processing, and SNI processing is performed before the extension
finalization step. However, it is useful for applications'
alpn_select callbacks to run after ciphersuite selection as well -- at
least one application protocol specification (HTTP/2) imposes restrictions
on which ciphersuites are usable with that protocol. Since it is generally
more preferrable to have a successful TLS connection with a default application
protocol than to fail the TLS connection and not be able to have the preferred
application protocol, it is good to give the alpn_select callback information
about the ciphersuite to be used, so that appropriate restrctions can be
enforced in application code.
Accordingly, split the ALPN handling out into a separate tls_handl_alpn()
function akin to tls_handle_status_request(), called from
tls_post_process_client_hello(). This is an alternative to resuscitating
ssl_check_clienthello_tlsext_late(), something of an awkwward name itself.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4070)
Some extensions were being displayed twice, before they were parsed, and
again after they were parsed.
The supported_versions extension was not being fully displayed, as it
was processed differently than other extensions.
Move the debug callback to where the extensions are first collected, to
catch all the extensions as they come in, so they are ordered correctly.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3911)
TLSv1.3 draft-21 requires the ticket nonce to be at least 1 byte in length.
However NSS sends a zero length nonce. This is actually ok because the next
draft will allow zero length nonces anyway, so we should tolerate this.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3957)
In most scenarios the length of the input data is the hashsize, or 0 if
the data is NULL. However with the new ticket_nonce changes the length can
be different.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/3852)
It is an API to be used from the early callback that indicates what
extensions were present in the ClientHello, and in what order.
This can be used to eliminate unneeded calls to SSL_early_get0_ext()
(which itself scales linearly in the number of extensions supported
by the library).
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2976)
Signed-off-by: Paul Yang <paulyang.inf@gmail.com>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3622)
We are quite inconsistent about which alerts get sent. Specifically, these
alerts should be used (normally) in the following circumstances:
SSL_AD_DECODE_ERROR = The peer sent a syntactically incorrect message
SSL_AD_ILLEGAL_PARAMETER = The peer sent a message which was syntactically
correct, but a parameter given is invalid for the context
SSL_AD_HANDSHAKE_FAILURE = The peer's messages were syntactically and
semantically correct, but the parameters provided were unacceptable to us
(e.g. because we do not support the requested parameters)
SSL_AD_INTERNAL_ERROR = We messed up (e.g. malloc failure)
The standards themselves aren't always consistent but I think the above
represents the best interpretation.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3480)
The current TLSv1.3 spec says:
'If a server is authenticating via a certificate and the client has not
sent a "signature_algorithms" extension, then the server MUST abort the
handshake with a "missing_extension" alert (see Section 8.2).'
If we are resuming then we are not "authenticating via a certificate" but
we were still aborting with the missing_extension alert if sig algs was
missing.
This commit ensures that we only send the alert if we are not resuming.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3478)
We already did this on an ad-hoc per extension basis (for some extensions).
This centralises it and makes sure we do it for all extensions.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3418)
The TLSv1.3 spec says that a server SHOULD send supported_groups in the
EE message if there is a group that it prefers to the one used in the
key_share. Clients MAY act on that. At the moment we don't do anything
with it on the client side, but that may change in the future.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3395)
Previously, init and finalization function for extensions are called
per extension block, rather than per message. This commit changes
that behaviour, and now they are called per message. The parse
function is still called per extension block.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3244)
Ensure that there are ciphersuites enabled for the maximum supported
version we will accept in a ClientHello.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3316)
RFC 7301 mandates that the server SHALL respond with a fatal
"no_application_protocol" alert when there is no overlap between
the client's supplied list and the server's list of supported protocols.
In commit 062178678f we changed from
ignoring non-success returns from the supplied alpn_select_cb() to
treating such non-success returns as indicative of non-overlap and
sending the fatal alert.
In effect, this is using the presence of an alpn_select_cb() as a proxy
to attempt to determine whether the application has configured a list
of supported protocols. However, there may be cases in which an
application's architecture leads it to supply an alpn_select_cb() but
have that callback be configured to take no action on connections that
do not have ALPN configured; returning SSL_TLSEXT_ERR_NOACK from
the callback would be the natural way to do so. Unfortunately, the
aforementioned behavior change also treated SSL_TLSEXT_ERR_NOACK as
indicative of no overlap and terminated the connection; this change
supplies special handling for SSL_TLSEXT_ERR_NOACK returns from the
callback. In effect, it provides a way for a callback to obtain the
behavior that would have occurred if no callback was registered at
all, which was not possible prior to this change.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2570)
The old custom extensions API was not TLSv1.3 aware. Extensions are used
extensively in TLSv1.3 and they can appear in many different types of
messages. Therefore we need a new API to be able to cope with that.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3139)
This move prepares for the later addition of the new custom extensions
API. The context codes have an additional "SSL_" added to their name to
ensure we don't have name clashes with other applications.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3139)
Add functions to add/retrieve the certificate_authorities. The older
client_CA functions mainly just call the new versions now.
Rename fields sice new extension can be generated by client and server.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3015)
Fix some comments too
[skip ci]
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3069)
Commit 6b1bb98fa moved the processing of ClientHello extensions into the
state machine post-processing stage. After processing s->init_num is reset
to 0, so by post-processing we cannot rely on its value. Unfortunately we
were using it to handle the PSK extension. This causes the handshake to
fail.
We were using init_num to figure out the length of ClientHello2 so we can
remove it from the handshake_buffer. The handshake_buffer holds the
transcript of all the messages sent so far. For PSK processing though we
only want to add in a partial ClientHello2. This commit changes things so
we just work out where ClientHello2 starts, working forward from the
beginning of handshake_buffer.
Fixes#2983
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2996)
In OpenSSL 1.1.0 the padding extension MUST be last because it calculates
the length of everything that has been written into the ClientHello to
determine whether it needs to be padded or not. With TLSv1.3 that isn't
possible because the specification requires that the PSK extension is last.
Therefore we need to fix the padding extension to take account of any PSK
extension that will be later added.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2968)
Zero out the length alongside the NULLing of the pointer, to
bring parity between the selected and proposed fields..
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2954)
If early data is sent to a server, but ALPN is not used then memcmp is
called with a NULL pointer which is undefined behaviour.
Fixes#2841
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2845)
We do not allow the generation of TLSv1.3 cookies. But if we receive one
in an HRR we will echo it back in the ClientHello.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2839)
