Only done for the read side so far. Still need to do TLS1.3 and SSL3.0.
Also need to separate out KTLS.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
We move the old ssl3_get_record function to conform with the new record
layer design.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
This transfers the low level function ssl3_read_n to the new record layer.
We temporarily make the read_n function a top level record layer function.
Eventually, in later commits in this refactor, we will remove it as a top
level function and it will just be called from read_record.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
Make the SSL object polymorphic based on whether this is
a traditional SSL connection, QUIC connection, or later
to be implemented a QUIC stream.
It requires adding if after every SSL_CONNECTION_FROM_SSL() call
which itself has to be added to almost every public SSL_ API call.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18612)
This rather long function used to call BIO_get_ktls_send
mutliple times, although that result cannot change during
the execution of that function.
There was a similar unnecessary call to BIO_get_ktls_recv
in ssl3_get_record.
And while I'm already there, rewrite ssl3_write_bytes
to use BIO_get_ktls_send as a boolean (so using "!" instead
of "== 0").
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18304)
- Don't unpad records, check the outer record type, or extract the
inner record type from TLS 1.3 records handled by the kernel. KTLS
performs all of these steps and returns the inner record type in the
TLS header.
- When checking the length of a received TLS 1.3 record don't allow
for the extra byte for the nested record type when KTLS is used.
- Pass a pointer to the record type in the TLS header to the
SSL3_RT_INNER_CONTENT_TYPE message callback. For KTLS, the old
pointer pointed to the last byte of payload rather than the record
type. For the non-KTLS case, the TLS header has been updated with
the inner type before this callback is invoked.
Co-authored-by: John Baldwin <jhb@FreeBSD.org>
Signed-off-by: Daiki Ueno <dueno@redhat.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17942)
When KTLS receive is enabled, pending data may still be present due to
read ahead. This data must still be processed the same as records
received without KTLS. To ease readability (especially in
consideration of additional checks which will be added for TLS 1.3),
add a helper variable 'using_ktls' that is true when the KTLS receive
path is being used to receive a record.
Co-authored-by: Dmitry Podgorny <pasis.ua@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17942)
In some corner cases the check for packets
which exceed the allowed record length was missing
when KTLS is initially enabled, when some
unprocessed packets are still pending.
Add at least some tests for KTLS, since we have
currently not very much test coverage for KTLS.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17504)
This replaces the AES-128-CBC-HMAC-SHA1 cipher with a
non-encrypting version for use the test suite.
[extended tests]
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16693)
Various comments referred to s->packet and s->packet_length instead of
s->rlayer.packet and s->rlayer.packet_length. Also fixed is a spot where
RECORD_LAYER_write_pending() should have been used. Based on the review
comments in #16077.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/16086)
For functions that exist in 1.1.1 provide a simple aliases via #define.
Fixes#15236
Functions with OSSL_DECODER_, OSSL_ENCODER_, OSSL_STORE_LOADER_,
EVP_KEYEXCH_, EVP_KEM_, EVP_ASYM_CIPHER_, EVP_SIGNATURE_,
EVP_KEYMGMT_, EVP_RAND_, EVP_MAC_, EVP_KDF_, EVP_PKEY_,
EVP_MD_, and EVP_CIPHER_ prefixes are renamed.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15405)
Add a "where did this EVP_{CIPHER,MD} come from" flag: global, via fetch,
or via EVP_{CIPHER,MD}_meth_new. Update EVP_{CIPHER,MD}_free to handle all
three origins. The flag is deliberately right before some function pointers,
so that compile-time failures (int/pointer) will occur, as opposed to
taking a bit in the existing "flags" field. The "global variable" flag
is non-zero, so the default case of using OPENSSL_zalloc (for provider
ciphers), will do the right thing. Ref-counting is a no-op for
Make up_ref no-op for global MD and CIPHER objects
Deprecate EVP_MD_CTX_md(). Added EVP_MD_CTX_get0_md() (same semantics as
the deprecated function) and EVP_MD_CTX_get1_md(). Likewise, deprecate
EVP_CIPHER_CTX_cipher() in favor of EVP_CIPHER_CTX_get0_cipher(), and add
EVP_CIPHER_CTX_get1_CIPHER().
Refactor EVP_MD_free() and EVP_MD_meth_free() to call new common
evp_md_free_int() function.
Refactor EVP_CIPHER_free() and EVP_CIPHER_meth_free() to call new common
evp_cipher_free_int() function.
Also change some flags tests to explicit test == or != zero. E.g.,
if (flags & x) --> if ((flags & x) != 0)
if (!(flags & x)) --> if ((flags & x) == 0)
Only done for those lines where "get0_cipher" calls were made.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14193)
Using ERR_LIB_* causes the error output to say 'reason(n)' instead of
the name of the sub-library in question.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14152)
Since SSLfatal() doesn't take a function code any more, we drop that
argument everywhere. Also, we convert all combinations of SSLfatal()
and ERR_add_data() to an SSLfatal_data() call.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13316)
DTLS by design ignores records/packets with bad MAC or failed AEAD tag
validation. However, recent changes to have provided cipher
implementations caused tls1_enc() to leave an entry on the error queue
for invalid GCM tags, e.g.:
800BEAEF487F0000:error::Provider routines:gcm_stream_update:cipher operation failed:providers/implementations/ciphers/ciphercommon_gcm.c:306
The BoringSSL tests check for entries on the error queue with
SSL_get_error() and so we were seeing spurious test failures
due to the additional item on the error queue. To avoid leaving
such spurious entries on the error queue, set a mark before calling
the ssl3_enc 'enc' method, and pop to that mark before ignoring
invalid packets.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13251)
Previously we passed it the data plus mac size. Now we just pass it the
data size. We already know the mac size.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12732)
This commit just moves the TLS1 and above implementation to use the TLS
HMAC implementation in the providers.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12732)
The TLS HMAC implementation should take care to calculate the MAC in
constant time in the case of MAC-Then-Encrypt where we have a variable
amount of padding.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12732)
errno is only valid if ktls_read_record() fails with a negative return
value.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12111)
We split these functions out into a separate file because we are
preparing to make this file shared between libssl and providers.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12288)
For CBC ciphersuites using Mac-then-encrypt we have to be careful about
removing the MAC from the record in constant time. Currently that happens
immediately before MAC verification. Instead we move this responsibility
to the various protocol "enc" functions so that MAC removal is handled at
the same time as padding removal.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12288)
HMACs used via the legacy EVP_DigestSign interface are strange in
that they use legacy codepath's which eventually (under the covers)
transform the operation into a new style EVP_MAC. This can mean the
digest in use can be a legacy one, so we need to be careful with any
digest we extract from the ctx.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11511)
Allow for encryption overhead in early DTLS size check
and send overflow if validated record is too long
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11096)
Now that libssl knows about libctx we should use it wherever we generate
a random number.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10927)
The decryption failed alert was deprecated a long time ago. It can
provide an attacker too much information to be able to distinguish between
MAC failures and decryption failures and can lead to oracle attacks.
Instead we should always use the bad_record_mac alert for these issues.
This fixes one instance that still exists. It does not represent a
security issue in this case because it is only ever sent if the record is
publicly invalid, i.e. we have detected it is invalid without using any
secret material.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10093)
Apart from public and internal header files, there is a third type called
local header files, which are located next to source files in the source
directory. Currently, they have different suffixes like
'*_lcl.h', '*_local.h', or '*_int.h'
This commit changes the different suffixes to '*_local.h' uniformly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)
With the removal of SSLv2, the s3 structure is always allocated, so
there is little point in having it be an allocated pointer. Collapse
the ssl3_state_st structure into ssl_st and fixup any references.
This should be faster than going through an indirection and due to
fewer allocations, but I'm not seeing any significant performance
improvement; it seems to be within the margin of error in timing.
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7888)
If we were using a different type of BIO than a socket BIO then
BIO_get_ktls_send() and BIO_get_ktls_recv() could return the wrong
result.
The above occurred even if KTLS was disabled at compile time - so we should
additionally ensure that those macros do nothing if KTLS is disabled.
Finally we make the logic in ssl3_get_record() a little more robust when
KTLS has been disabled.
[extended tests]
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8793)
This patch adds support for the Linux TLS Rx socket option.
It completes the previous patch for TLS Tx offload.
If the socket option is successful, then the receive data-path of the TCP
socket is implemented by the kernel.
We choose to set this option at the earliest - just after CCS is complete.
Change-Id: I59741e04d89dddca7fb138e88fffcc1259b30132
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7848)
