Currently we do not have any way to retrieve these values once set.
Fixes#18035.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18038)
This removes a guard condition that prevents KTLS being enabled for
receiving in TLS 1.3. Use the correct sequence number and BIO for
receive vs transmit offload.
Co-authored-by: John Baldwin <jhb@FreeBSD.org>
Signed-off-by: Daiki Ueno <dueno@redhat.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17942)
For TLSv1.3, limit ticket lifetime hint to 1 week per RFC8446
Fixes#17948
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17952)
Provide a different mechanism to indicate that the application wants
to retry the verification. The negative result of the callback function
now indicates an error again.
Instead the SSL_set_retry_verify() can be called from the callback
to indicate that the handshake should be suspended.
Fixes#17568
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17825)
The SNI test in test_cert_cb_int() was always failing because it used
SSL_CTX_new() instead of SSL_CTX_new_ex() and was therefore not using the
correct libctx. PR #17739 amended the test to check the return value from
SSL_CTX_new() which made the failure obvious.
Fixes#17757
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/17758)
As the potential failure of the memory allocation, it should
be better to check the return value of SSL_CTX_new() and return
error if fails, like SSL_CTX_new_ex().
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17739)
When pem_password_cb is used from SSL_CTX, its size
parameter should be equal to PEM_BUFSIZE.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/17320)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17033)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16918)
Test the scenario where we add a custom extension to a cetificate
request and expect a response in the client's certificate message.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16634)
Fix tests that were expecting a default security level of 1 to work with
the new default of 2.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/16760)
This is the length of the tag they use and should be considered an upper bound
on their strength.
This lowers their security strength to level 0.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16652)
The TRSCV state abbrev was used for two states:
* TLS_ST_CR_CERT_VRFY
* TLS_ST_SW_CERT_VRFY
The second one is wrong because it's a write operation.
The state for TLS_ST_SW_CERT_VRFY should be "TWSCV"
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16327)
Test that SSL_key_update() is not allowed if there are writes pending.
Test that there is no reset of the packet pointer in ssl3_setup_read_buffer().
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16085)
Fixes build failures if using enable-ktls in conjunction with --strict-warnings
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16090)
Because of how the 'client_multi' variable is set, we end up
running the tests where the client configures multiple groups (and
the server only configures one) before the ones where the server configures
multiple groups (and the client only configures one).
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16007)
Fixes#15963
INSTALL.md uses these exact options as an example so it should work.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15965)
- Use SSL_set_ciphersuites for TLS 1.3 tests instead of using
SSL_set_cipher_list.
- Don't bother passing a sequence number size to KTLS test functions.
These functions always test TLS (and not DTLS) for which the
sequence size is always the same. In addition, even for DTLS the
check in question (verifying that the sequence number fields in SSL
do not change) should still pass when doing a before/after
comparison of the field.
- Define a helper structure to hold the TLS version and cipher name
for a single KTLS test.
- Define an array of such structures with valid KTLS ciphers and move
#ifdef's for TLS versions and supported ciphers out of test
functions and instead use them to define the valid members of this
array. This also permits using TLS 1.3 cipher suite names for
TLS 1.3 tests.
- Use separate tests per cipher for test_ktls to give more
fine-grained pass/fail results as is already done for
test_ktls_sendfile.
- While here, rename test_ktls_sendfile to execute_test_ktls_sendfile
and test_ktls_sendfile_anytls to test_ktls_sendfile. This is more
consistent with the naming used for test_ktls as well as other tests
in this file.
- Close the file descriptors used for temporary sockets in ktls tests.
- Don't assume that KTLS is supported for all compile-time supported
cipher suites at runtime. If the kernel fails to offload a given
cipher suite, skip the test rather than failing it. FreeBSD kernels
may not offload all of the cipher suites supported by its KTLS if a
suitable driver or KTLS backend is not present.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15814)
Sort SSL_SESSION structures by timeout in the linked list.
Iterate over the linked list for timeout, stopping when no more
session can be flushed.
Do SSL_SESSION_free() outside of SSL_CTX lock
Update timeout upon use
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8687)
For functions that exist in 1.1.1 provide a simple aliases via #define.
Fixes#15236
Functions with OSSL_DECODER_, OSSL_ENCODER_, OSSL_STORE_LOADER_,
EVP_KEYEXCH_, EVP_KEM_, EVP_ASYM_CIPHER_, EVP_SIGNATURE_,
EVP_KEYMGMT_, EVP_RAND_, EVP_MAC_, EVP_KDF_, EVP_PKEY_,
EVP_MD_, and EVP_CIPHER_ prefixes are renamed.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15405)
Now that we can become "in init" directly after the call, test the
various scenarios where explicit SSL_do_handshake() calls can come
into play.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14817)
This is nearly comprehensive, but we cannot exercise the functionality
for PSK-only TLS 1.3 resumption, since openssl talking to openssl will
always negotiate psk_dhe_ke.
Exercise both the TLS 1.3 and 1.2 cases, for initial handshakes
and resumptions, and for ECDHE and FFDHE.
Since RFC 7919 named groups (for FFDHE) are only supported for TLS 1.3,
the TLS 1.2 versions of those scenarios expect to get NID_undef since
the key exchange was not performed using a named group.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14750)
We don't implement RFC 7919 named groups for TLS 1.2, so we can
only test the ECDHE case for non-TLS-1.3.
Interestingly, though the test_key_exchange() routine claimed to
be exercising ffdhe2048 with TLS 1.2, the configured ciphers were
incompatible with DHE key exchange, so we ended up just using RSA
key transport and not doing an ephemeral key exchange at all.
Reconfigure the tests to actually exercise ephemeral key exchange
for both the EC and FF cases (even though we don't use the named
group information for the finite-field case).
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14750)
Using OSSL_STORE is too heavy and breaks things.
There were also needed various fixes mainly for missing proper
handling of the SM2 keys in the OSSL_DECODER.
Fixes#14788
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15045)
SHA1 is now in security level 0. SHA1 is required for DTLSv1.1. Therefore
sslapitest needed some adjustments in the event that DTLSv1.2 is disabled.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15047)
It's possible to set an invalid protocol list that will be sent in a
ClientHello. This validates the inputs to make sure this does not
happen.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14815)
It has always been the case that KTLS is not compiled by default. However
if it is compiled then it was automatically used unless specifically
configured not to. This is problematic because it avoids any crypto
implementations from providers. A user who configures all crypto to use
the FIPS provider may unexpectedly find that TLS related crypto is actually
being performed outside of the FIPS boundary.
Instead we change KTLS so that it is disabled by default.
We also swap to using a single "option" (i.e. SSL_OP_ENABLE_KTLS) rather
than two separate "modes", (i.e. SSL_MODE_NO_KTLS_RX and
SSL_MODE_NO_KTLS_TX).
Fixes#13794
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14799)
X509_VERIFY_PARAM_inherit() now copies hostflags independently of hosts.
Previously hostflags were only copied when at least one host was set.
Typically applications don't configure hosts on SSL_CTX. The change
enables applications to configure hostflags on SSL_CTX and have OpenSSL
copy the flags from SSL_CTX to SSL.
Fixes: https://github.com/openssl/openssl/issues/14579
Signed-off-by: Christian Heimes <christian@python.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14743)
OTC have decided that the EVP_PKEY_get0* functions should have a const
return type. This is a breaking change to emphasise that these values
should be considered as immutable.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14319)
