Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21467)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21397)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21116)
We save the error state from the thread that encountered
a permanent error condition caused by system or internal
error to the QUIC_CHANNEL.
Then we restore it whenever we are returning to a user
call when protocol is shutdown.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21087)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
CLA: trivial
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21319)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21029)
EVP_PKEY_get_default_digest_name() may return 1 with the returned digest
name "UNDEF". This case hasn't been documented, and the meaning has been
left undefined, until now.
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20460)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21190)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20866)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19231)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20879)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20879)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20879)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20879)
We provide information about the new QUIC support related to the
msg_callback. We also document SSL_trace() which was previously missing
from the man pages.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20914)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20832)
Fix only typos in doc/man* for inclusion in 3.* branches.
Other typos have been fixed in a different commit.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20924)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20848)
These functions do nothing if used with a QUIC object, so we document
this behaviour.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20830)
The docs mentioned a "RD"/"read done" state that could be returned.
In practice that never happened, so update the docs to match
reality.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20827)
Also updated the corresponding documentations.
Fixes#20710
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20745)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20736)
This keeps the interface consistent with other HPKE API's.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20583)
Add support for the RFC7250 certificate-type extensions.
Alows the use of only private keys for connection (i.e. certs not needed).
Add APIs
Add unit tests
Add documentation
Add s_client/s_server support
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18185)
The function was incorrectly documented as enabling policy checking.
Fixes: CVE-2023-0466
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20561)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20204)
The documentation didn't mention the development where EVP_PKEY_get_id()
returns a negative value for provider-only implementations, and the
migration guide didn't mention how to cope with that.
Fixes#20497
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20501)
remove unneeded const qualifier to keep method declaration
and definition in sync.
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/20436)
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/20436)
As the sleep() call is interruptible, it is not even a good idea to call
it in a loop if the caller uses some ridiculously large value as an
infinity just waiting for an interrupt.
Fixes#20524
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/20533)
If the ctx was *really* needed we'll probably fail later with an error
anyway, so no point in failing immediately.
Document that this behavior is dependent on the provider used to
implement the signature/verification.
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/20375)
SSL_OP_NETSCAPE_CA_DN_BUG became obsolete in 3c33c6f6b1 and
support for SSL_OP_NETSCAPE_DEMO_CIPHER_CHANGE_BUG was removed by
7a4dadc3a6. The definitions are still listed under "OBSOLETE
OPTIONS retained for compatibility" in ssl.h.in, so this commit adds
them to the list of obsolete options in doc/man3.
Refs: https://github.com/nodejs/node/pull/46954
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20443)
In the default setup, using prediction resistance cascades to a reseeding
of all DRBGs. The cost for this will be excessive for highly threaded
applications.
Fixes#20414
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/20452)
Clearly document that implicit fetching is slower when using providers,
and explain prefetching. Added to crypto.pod and migration_guide.pod
links to it.
Add a link to EVP_default_properties_enable_fips() in crypto.pod.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20354)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20369)
Also add checks on failing cert/CRL up_ref calls; improve coding style.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19199)
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20327)
Also add corresponding tests and to this end update credentials
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20160)
S390x has to ability to offload modular exponentiation and CRT operations to
Crypto Express Adapters. This possible performance optimization was not yet
used by OpenSSL. Add support for offloading and implement an optimized
version of RSA and DH with it.
The environment variable OPENSSL_s390xcap now recognizes the token "nocex" to
prevent offloading.
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20113)
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19946)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20205)
Add missing `I` to `<b>`
CLA: trivial
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20169)
Fixes#20084
In the 3.0 provider implementation the generic code that handles IV's
only allows a 12 byte IV. Older code intentionally added the ability for
the IV to be truncated.
As this truncation is unsafe, the documentation has been updated to
state that this in no longer allowed. The code has been updated to
produce an error when the iv length is set to any value other than 12.
NOTE: It appears that this additional padding may have originated from the code
which uses a 12 byte IV, that is then passed to CHACHA which zero pads it to 16 bytes.
Note that legacy behaviour in e_chacha20_poly1305.c has not been
updated.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20151)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18704)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19271)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19271)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20109)
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20095)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20052)
Clarify behavior of OSSL_CMP_CTX_set_option() when given (negative)
values for OSSL_CMP_OPT_MSG_TIMEOUT or OSSL_CMP_OPT_TOTAL_TIMEOUT.
Fix doc of -msg_timeout and -total_timeout in openssl-cmp.pod.in
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19391)
Current man page indicates the function returns an int while it returns
a long.
Fixes#20096.
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20097)
Fixes#19718Fixes#19716
Added PKCS12_SAFEBAG_get1_cert_ex(), PKCS12_SAFEBAG_get1_crl_ex() and
ASN1_item_unpack_ex().
parse_bag and parse_bags now use the libctx/propq stored in the P7_CTX.
PKCS12_free() needed to be manually constructed in order to free the propq.
pkcs12_api_test.c changed so that it actually tests the libctx, propq.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19942)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20019)
Fixes#8630
The remaining functions are at least as old as 0.9.8 so it is
not worth documenting this.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19956)
Fixes#19829
Examples added for setting/getting ECDSA SIG related r and s values
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19936)
Fixes#19782
Clarify that EVP_Q_MAC() can be used as an alternative that allows
setting of the libctx.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19855)
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19889)
We already permit this in crypto/objects/objects.txt, but not programatically,
although being able to do so programatically would be beneficial.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19876)
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13817)
The RSA decryption as implemented before required very careful handling
of both the exit code returned by OpenSSL and the potentially returned
ciphertext. Looking at the recent security vulnerabilities
(CVE-2020-25659 and CVE-2020-25657) it is unlikely that most users of
OpenSSL do it correctly.
Given that correct code requires side channel secure programming in
application code, we can classify the existing RSA decryption methods
as CWE-676, which in turn likely causes CWE-208 and CWE-385 in
application code.
To prevent that, we can use a technique called "implicit rejection".
For that we generate a random message to be returned in case the
padding check fails. We generate the message based on static secret
data (the private exponent) and the provided ciphertext (so that the
attacker cannot determine that the returned value is randomly generated
instead of result of decryption and de-padding). We return it in case
any part of padding check fails.
The upshot of this approach is that then not only is the length of the
returned message useless as the Bleichenbacher oracle, so are the
actual bytes of the returned message. So application code doesn't have
to perform any operations on the returned message in side-channel free
way to remain secure against Bleichenbacher attacks.
Note: this patch implements a specific algorithm, shared with Mozilla
NSS, so that the attacker cannot use one library as an oracle against the
other in heterogeneous environments.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13817)
FIPS 186-4 section 5 "The RSA Digital Signature Algorithm", subsection
5.5 "PKCS #1" says: "For RSASSA-PSS […] the length (in bytes) of the
salt (sLen) shall satisfy 0 <= sLen <= hLen, where hLen is the length of
the hash function output block (in bytes)."
Introduce a new option RSA_PSS_SALTLEN_AUTO_DIGEST_MAX and make it the
default. The new value will behave like RSA_PSS_SALTLEN_AUTO, but will
not use more than the digest length when signing, so that FIPS 186-4 is
not violated. This value has two advantages when compared with
RSA_PSS_SALTLEN_DIGEST: (1) It will continue to do auto-detection when
verifying signatures for maximum compatibility, where
RSA_PSS_SALTLEN_DIGEST would fail for other digest sizes. (2) It will
work for combinations where the maximum salt length is smaller than the
digest size, which typically happens with large digest sizes (e.g.,
SHA-512) and small RSA keys.
J.-S. Coron shows in "Optimal Security Proofs for PSS and Other
Signature Schemes. Advances in Cryptology – Eurocrypt 2002, volume 2332
of Lecture Notes in Computer Science, pp. 272 – 287. Springer Verlag,
2002." that longer salts than the output size of modern hash functions
do not increase security: "For example,for an application in which at
most one billion signatures will be generated, k0 = 30 bits of random
salt are actually sufficient to guarantee the same level of security as
RSA, and taking a larger salt does not increase the security level."
Signed-off-by: Clemens Lang <cllang@redhat.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19724)
Do not accept password-based if expected signature-based and no secret is available and
do not accept signature-based if expected password-based and no trust anchors available.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19729)
The types OSSL_DISPATCH, OSSL_ITEM, OSSL_ALGORITHM, OSSL_PARAM,
OSSL_CALLBACK, and OSSL_PASSPHRASE_CALLBACK are described in their own
manual page, so we change every mention of them to links to those pages.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19842)
This expands on some of the core type descriptions, and also makes it
easier to find the documentation for each type, at least on Unix, with
a simple call like "man OSSL_ALGORITHM".
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19842)
Fixes openssl#19771
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19787)
Fixes GH #19786
Also simplify the CSPRNG must be seeded argument.
Since version 1.1.1, the CSPRNG is seeded automatically on first use,
so it's not the responsibility of the programmer anymore. Still, he
needs to be aware that the seeding might fail.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19789)
This supports all the modes, suites and export mechanisms defined
in RFC9180 and should be relatively easily extensible if/as new
suites are added. The APIs are based on the pseudo-code from the
RFC, e.g. OSS_HPKE_encap() roughly maps to SetupBaseS(). External
APIs are defined in include/openssl/hpke.h and documented in
doc/man3/OSSL_HPKE_CTX_new.pod. Tests (test/hpke_test.c) include
verifying a number of the test vectors from the RFC as well as
round-tripping for all the modes and suites. We have demonstrated
interoperability with other HPKE implementations via a fork [1]
that implements TLS Encrypted ClientHello (ECH) which uses HPKE.
@slontis provided huge help in getting this done and this makes
extensive use of the KEM handling code from his PR#19068.
[1] https://github.com/sftcd/openssl/tree/ECH-draft-13c
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17172)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19216)
Otherwise, further OSSL_CMP_exec_GENM_ses() calls will go wrong.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19216)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19222)
There is no reason preventing this API to support SM2,
which gives us a simple method to do SM2 key gen.
CLA: trivial
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19736)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19205)
On this occasion, replace magic constants by mnemonic ones; update doc
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19205)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19230)
TLS device offload allows to perform zerocopy sendfile transmissions.
FreeBSD provides this feature by default, and Linux 5.19 introduced it
as an opt-in. Zerocopy improves the TX rate significantly, but has a
side effect: if the underlying file is changed while being transmitted,
and a TCP retransmission happens, the receiver may get a TLS record
containing both new and old data, which leads to an authentication
failure and termination of connection. This effect is the reason Linux
makes a copy on sendfile by default.
This commit adds support for TLS zerocopy sendfile on Linux disabled by
default to avoid any unlikely backward compatibility issues on Linux,
although sacrificing consistency in OpenSSL's behavior on Linux and
FreeBSD. A new option called KTLSTxZerocopySendfile is added to enable
the new zerocopy behavior on Linux. This option should be used when the
the application guarantees that the file is not modified during
transmission, or it doesn't care about breaking the connection.
The related documentation is also added in this commit. The unit test
added doesn't test the actual functionality (it would require specific
hardware and a non-local peer), but solely checks that it's possible to
set the new option flag.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18650)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19715)
FIPS 186-4 has 5 different algorithms for key generation,
and all of them rely on testing GCD(a,n) == 1 many times.
Cachegrind was showing that during a RSA keygen operation,
the function BN_gcd() was taking a considerable percentage
of the total cycles.
The default provider uses multiprime keygen, which seemed to
be much faster. This is because it uses BN_mod_inverse()
instead.
For a 4096 bit key, the entropy of a key that was taking a
long time to generate was recorded and fed back into subsequent
runs. Roughly 40% of the cycle time was BN_gcd() with most of the
remainder in the prime testing. Changing to use the inverse
resulted in the cycle count being 96% in the prime testing.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19578)
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19509)
i2d_XXX_bio and i2d_XXX_fp return either 0 or 1.
Other i2d_XXX functions return the number of bytes or negative on error.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18427)
These functions pass a library content and prop query.
The i2d documentation related to these functions has been corrected since the bio and fp functions always return 0 or 1.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18427)
Document the effect on the internal read buffer when using pipelining.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19456)
The FIPS 140-3 DSA and ECDSA tests need to be known answer tests which means
the entropy needs to be cooked. This permits this.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/19510)
I.e., those that can be called with NULL stack parameter or invalid index.
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19400)
size_t-ify the COMP_METHOD structure and functions.
Get rid of the non-functional COMP_METHODS and return NULL instead.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18186)
Some primitives are designed to be used in a multi-threaded environment,
if supported, e.g., Argon2.
This patch adds support for preemptive threading and basic synchronization
primitives for platforms compliant with POSIX threads or Windows CRT.
Native functions are wrapped to provide a common (internal) API.
Threading support can be disabled at compile time. If enabled, threading
is disabled by default and needs to be explicitly enabled by the user.
Thread enablement requires an explicit limit on the number of threads that
OpenSSL may spawn (non-negative integer/infinity). The limit may be changed.
Signed-off-by: Čestmír Kalina <ckalina@redhat.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12255)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19359)
Mention the brainpool curves in the documentation
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/19315)
3.1 has been decided to be a FIPS 140-3 release, springing from the branch
openssl-3.0, and the master branch to continue with the development of
OpenSSL 3.2.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19350)
ossl_sleep() was implemented as a static inline function in internal/e_os.h,
using usleep() on Unix and Sleep() on Windows. So far well and good.
However, it also has a fallback implementation for systems that do not have
usleep() or Sleep(), and that implementation happens to use ossl_time_now(),
which is a normal function, private to libcrypto, and is judged to be too
complex to sanely make into a static inline function.
This fallback creates a problem, because we do use ossl_sleep() in apps/ and
a few test programs in test/, and when they are linked with libcrypto in
shared library form, ossl_time_now() can't be found, since it's not publicly
exposed.
Something needs to give, and the easiest, and hopefully sanest answer is to
make ossl_sleep() a publicly exposed function, which requires a slight name
change.
Documentation and 'make update' result included.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/19330)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19257)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19240)
The code is derived from @sftcd's work in PR #17172.
This PR puts the DHKEM algorithms into the provider layer as
KEM algorithms for EC and ECX.
This PR only implements the DHKEM component of HPKE as specified in
RFC 9180.
crypto/hpke/hpke_util.c has been added for fuctions that will
be shared between DHKEM and HPKE.
API's for EVP_PKEY_auth_encapsulate_init() and EVP_PKEY_auth_decapsulate_init()
have been added to support authenticated encapsulation. auth_init() functions
were chosen rather that a EVP_PKEY_KEM_set_auth() interface to support
future algorithms that could possibly need different init functions.
Internal code has been refactored, so that it can be shared between the DHKEM
and other systems. Since DHKEM operates on low level keys it needs to be
able to do low level ECDH and ECXDH calls without converting the keys
back into EVP_PKEY/EVP_PKEY_CTX form. See ossl_ecx_compute_key(),
ossl_ec_public_from_private()
DHKEM requires API's to derive a key using a seed (IKM). This did not sit
well inside the DHKEM itself as dispatch functions. This functionality
fits better inside the EC and ECX keymanagers keygen, since
they are just variations of keygen where the private key is generated
in a different manner. This should mainly be used for testing purposes.
See ossl_ec_generate_key_dhkem().
It supports this by allowing a settable param to be passed to keygen
(See OSSL_PKEY_PARAM_DHKEM_IKM).
The keygen calls code within ec and ecx dhkem implementation to handle this.
See ossl_ecx_dhkem_derive_private() and ossl_ec_dhkem_derive_private().
These 2 functions are also used by the EC/ECX DHKEM implementations to generate
the sender ephemeral keys.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19068)
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19239)
X509_STORE_load_locations_ex() calls X509_STORE_load_file_ex() and X509_STORE_load_path(), there's no such function name as X509_STORE_load_dir().
CLA: trivial
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19202)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18434)
Also change B< to I< in {CMS,PKCS7}_verify.pod, PKCS7_sign{,_add_signer}.pod
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18915)
This limit was increased with 20c2876f24 ("Increase
HKDF_MAXBUF from 1024 to 2048").
CLA: trivial
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19085)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18929)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18930)
Also constify X509_REQ_get0_pubkey() and X509_REQ_check_private_key().
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18930)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18931)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18675)
Other very similar functions were documented, but this one was missing.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18974)
Code signing certificates have other properties as for example described in
CA Browser Forum documents. This leads to "unsupported certificate purpose" errors when
verifying signed objects.
This patch adds the purpose "codesign" to the table in X.509 certificate verification and
the verification parameter "code_sign" to X509_VERIFY_PARAM.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18567)
Also clarify that EVP_PKEY_fromdata ignores parameters that
are unknown or incorrect for given selection.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18902)
The documentation was misleading in that it suggests that this environment
variable will record information about all allocations. While this is true
it doesn't record the most useful information that you might expect such
as the requested size of the allocation! It is mainly for use in
conjunction with OPENSSL_MALLOC_FAILURES, and reports information about
what chance an allocation has of failing.
We also clarify that the mem_debug functions are actually no-ops in 3.0.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18967)
The rest of the documentation talks about sig, not sigret
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18943)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18925)
Updates the docs to describe EC_KEY_set_private_key() function behavior
when a NULL priv_key argument is passed.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/18942)
