This can be useful for fixing the CI if needed
without the necessity to run abidw locally.
Also rename the CI job to make its purpose clearer.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22689)
Add ability to measure performance of the two kmac algorithms, and
reduce code duplication in mac testing by introducing mac_setup() and
mac_teardown(). Also, start accepting "cmac" as an algorithm string
(similar to how "hmac" is accepted).
We can now compare the performance of KMAC128, KMAC256 (mac algs) to
KECCAK-KMAC128, KECCAK-KMAC256 (digest/xof algs).
Fixes#22619
Testing:
$ LD_LIBRARY_PATH=. ./apps/openssl speed kmac cmac hmac
$ LD_LIBRARY_PATH=. ./apps/openssl speed kmac256
$ LD_LIBRARY_PATH=. ./apps/openssl speed -evp KECCAK-KMAC256
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22764)
Amend the assembler so it uses only 32bit value.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22750)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22750)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22750)
The text "CLA: trivial" should go at the bottom of the commit message.
Also, update the force-push command to include the repository and
branch, which can avoid unexpected force-push results.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22775)
VSI C on OpenVMS for x86_64 has a bit more information than on other
hardware. This is no doubt because it's based on LLVM which leaves an
opening for cross compilation.
VSI C on Itanium:
$ CC/VERSION
VSI C V7.4-001 on OpenVMS IA64 V8.4-2L3
VSI C on x86_64:
$ CC/VERSION
VSI C x86-64 X7.4-843 (GEM 50XB9) on OpenVMS x86_64 V9.2-1
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22792)
prefer hmac(sha256) rather than hmac(md5). Also, drop the "skip_hmac"
label. If we are supposed to do hmac(hash_func) and hash_func cannot
be found, then error out immediately.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22793)
ctx->propq that strdup from input parameter propq in sm2sig_newctx,
is not released. It should be released in sm2sig_freectx and copied
to dstctx in sm2sig_dupctx. And dstctx->id and dstctx->propq should
be set NULL to avoid releasing id/propq of srcctx when err occurs.
Signed-off-by: Huiyue Xu <xuhuiyue@huawei.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22796)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22785)
(cherry picked from commit d330fef1f1)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22785)
(cherry picked from commit 5e07ea4f82)
The macro for "block-size" is OSSL_MAC_PARAM_BLOCK_SIZE, and this
parameter is not settable. Refer to the "customization string" rather
than the "custom value" (in the Blake2 spec, this is called the
personalization string).
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22763)
KECCAK-KMAC-128 and KECCAK-KMAC-256 are extendable output functions
that have been defined because they are convenient for implementing
KMAC. Give definitions for them so that users aren't left to figure
that out themselves. KECCAK-KMAC-128 is very similar to SHAKE-128,
and KECCAK-KMAC-256 is very similar to SHAKE-256.
Related to #22619.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22755)
Make the documentation match reality. Add lots of missing algorithms.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22694)
Add two new files
doc/images/openssl-square.svg
doc/images/openssl-square-nontransparent.png
and update the existing file
doc/images/openssl.svg
The "square" versions of the logo write "Open" and "SSL" on separate
lines, so that less horizontal space is used.
The png file (nontransparent, white background) can be used to update
the profile picture for the OpenSSL organization on GitHub.
For the existing logo, openssl.svg, the subtitle "Cryptography and
SSL/TLS Toolkit" has been dropped and the text-elements have been
converted to paths (so they are no longer dependent on what fonts the
renderer provides).
The svg files were provided by Anton A.
Part of https://github.com/openssl/project/issues/262
Reviewed-by: Anton Arapov <anton@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22626)
When PKCS7_add_signed_attribute fails, the ASN1_TIME
object may be leaked when it was not passed in as
input parameter.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22772)
This may happen when ssl_cert_dup calls custom_exts_copy, where
a possible memory allocation error causes custom_exts_free
to be called twice: once in the error handling of custom_exts_copy
and a second time in the error handling of ssl_cert_dup.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22772)
When an error happens after cms_encode_Receipt
the ASN1_OCTET_STRING object "os" may be leaked.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22758)
When PKCS7_add_signed_attribute fails, the ASN1_STRING
object may be leaked.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22744)
Several error cases leak either the X509 object
or the pkey or the danetls_record object.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22743)
Fix spelling $cppfags2 => $cppflags2 in file Configurations/windows-makefile.tmpl
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22771)
When we are clearing the sent messages queue we should ensure we free any
old write record layers that are no longer in use. Previously this logic
was in dtls1_hm_fragment_free() - but this can end up freeing the current
record layer under certain error conditions.
Fixes#22664
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22679)
if we allocate a new hm_frament in dtls1_buffer_message with
dtls1_hm_fragment_new, the returned fragment contains uninitalized data in the
msg_header field. If an error then occurs, and we free the fragment,
dtls_hm_fragment_free interrogates the msg_header field (which is garbage), and
potentially references undefined values, or worse, accidentally references
available memory that is not owned, leading to various corruptions.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22679)
Because the quicserver utility supports expressly listening in ipv4/6
mode, its possible/likely that the server will listen on an ipv4
address, while the clients will connect via ipv6, leading to connection
failures.
Augment quic demo clients to afford them the same -6 option that the
server has so that connection family can be co-ordinated
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22577)
The check is always made according to the host platform's rules, which may
not be true for true when the target platform is different, e.g. when
cross-building for Windows on a Linux machine. So skip this check when
used together with the `--cross-compile-prefix=` option.
Fixes https://github.com/openssl/openssl/issues/9520
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22723)
libabigail is currenly only validating symbol presence and version
information in ci. We should also be validating function parameters,
types, etc. To do this we need to build the library with -g so the
dwarf information is available for libabigail to interrogate
while we're at it, also add a script to re-generate the xml that abidiff
uses for comparison during ci runs, to make updates easier
Fixes#22712
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22713)
If the available space is equal to the tag length then we have no available
space for plaintext data.
Fixes#22699
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22715)
Check that the "consumed" parameter is working as expected.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22718)
If a single packet contains data from multiple streams we need to keep track
of the cummulative connection level credit consumed across all of the
streams. Once the connection level credit has been consumed we must stop
adding stream data.
Fixes#22706
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22718)
For armv4 - Only the first 4 parameters can be passed via registers
(r0..r3).
As all of the general registers are already used,
r11 was used to store the 'next' param.
R11 is now pushed/poped on entry/exit.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22719)
Update makefiles so that consistent patterns are used. Object files
are compiled from source using an implicit rule (but using our
CFLAGS); for linking, we give an explicit rule. Ensure that "make
test" works in each subdirectory (even if it does not actually run any
applications). The top-level demo makefile now works.
The makefiles are not make-agnostic. e.g. they use the variable $(RM)
in "clean" recipes, which is defined in gnu-make but may not be
defined in others.
Part of #17806
Testing:
$ cd demo
$ make test
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22698)
Fix the conditional on the 'next' parameter passed into SHA3_squeeze.
Reported-by: David Benjamin <davidben@davidben.net>
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22722)
CMake's older package finder, FindOpenSSL.cmake, does a best guess effort
and doesn't always get it right.
By CMake's own documentation, that's what such modules are (best effort
attempts), and package producers are (strongly) encouraged to help out by
producing and installing <PackageName>Config.cmake files to get a more
deterministic configuration.
The resulting OpenSSLConfig.cmake tries to mimic the result from CMake's
FindOpenSSL.cmake, by using the same variable and imported target names.
It also adds a few extra variables of its own, such as:
OPENSSL_MODULES_DIR Indicates the default installation directory
for OpenSSL loadable modules, such as providers.
OPENSSL_RUNTIME_DIR Indicates the default runtime directory, where
for example the openssl program is located.
OPENSSL_PROGRAM Is the full directory-and-filename of the
openssl program.
The imported targets OpenSSL::Crypto and OpenSSL::SSL are as precisely
specified as possible, so for example, they are specified with the both the
import library and the DLL on Windows, which should make life easier on that
platform.
For the moment, one of the following must be done in your CMake project for
this CMake configuration to take priority over CMake's FindOpenSSL.cmake:
- The variable CMAKE_FIND_PACKAGE_PREFER_CONFIG must be set to true prior
to the 'find_package(OpenSSL)' call.
- The 'find_package' call itself must use the "Full Signature". If you
don't know any better, simply add the 'CONFIG' option, i.e. from this
example:
find_package(OpenSSL 3.0 REQUIRED)
to this:
find_package(OpenSSL 3.0 REQUIRED CONFIG)
Just as with the 'pkg-config' exporters, two variants of the .cmake files
are produced:
- Those in 'exporters/' are installed in the location that 'pkg-config'
itself prefers for installed packages.
- Those in the top directory are to be used when it's desirable to build
directly against an OpenSSL build tree.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20878)
The pkg-config exporters were a special hack, all in
Configurations/unix-Makefile.tmpl, and this was well and good as long
as that was the only main package interface configuration system that we
cared about.
Things have changed, though, so we move the pkg-config production to be
templatable in a more flexible manner. Additional templates for other
interface configuration systems can then be added fairly easily.
Two variants of the .pc files are produced:
- Those in 'exporters/' are installed in the location that 'pkg-config'
itself prefers for installed packages.
- Those in the top directory are to be used when it's desirable to build
directly against an OpenSSL build tree.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20878)
