The internal error reason is confusing and indicating an error
in OpenSSL and not a configuration problem.
Fixes#19867
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19875)
The sequence counter was incremented in numerous different ways in
numerous different locations. We introduce a single function to do this
inside the record layer.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19424)
We no longer have to go through the SSL object to discover whether EtM has
been negotiated.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
We move the old ssl3_get_record function to conform with the new record
layer design.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
This transfers the low level function ssl3_read_n to the new record layer.
We temporarily make the read_n function a top level record layer function.
Eventually, in later commits in this refactor, we will remove it as a top
level function and it will just be called from read_record.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
The new names are ossl_err_load_xxx_strings.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15446)
Removed error codes, and the mention of the functions.
This removal is already documented in the CHANGES doc.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15140)
The supported groups code was checking the OPENSSL_NO_EC and
OPENSSL_NO_DH guards in order to work, and the list of default groups was
based on those guards. However we now need it to work even in a no-ec
and no-dh build, because new groups might be added from providers.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13916)
If a digest is not available we just get an "internal error" error
message - which isn't very helpful for diagnosing problems. Instead we
explicitly state that we couldn't find a suitable digest.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12733)
If EVP_PKEY_copy_parameters() failed in libssl we did not provide a very
helpful error message. We provide a better one.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11914)
We use the SHA256 digest of the ticket as a "fake" session id. We should
ensure that the SHA256 implementation is fetched from the appropriate
provider.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11356)
If we hit an EOF while reading in libssl then we will report an error
back to the application (SSL_ERROR_SYSCALL) but errno will be 0. We add
an error to the stack (which means we instead return SSL_ERROR_SSL) and
therefore give a hint as to what went wrong.
Contains a partial fix for #10880
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/10907)
The output C code was made to use ERR_func_error_string() to see if a
string table was already loaded or not. Since this function returns
NULL always, this check became useless.
Change it to use ERR_reason_error_string() instead, as there's no
reason to believe we will get rid of reason strings, ever.
To top it off, we rebuild all affected C sources.
Fixes#9756
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9756)
This commit adds the SSL_sendfile call, which allows KTLS sockets to
transmit file using zero-copy semantics.
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8727)
Ensure that the certificate required alert actually gets sent (and doesn't
get translated into handshake failure in TLSv1.3).
Ensure that proper reason codes are given for the new TLSv1.3 alerts.
Remove an out of date macro for TLS13_AD_END_OF_EARLY_DATA. This is a left
over from an earlier TLSv1.3 draft that is no longer used.
Fixes#6804
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6809)
The spec says that a client MUST set legacy_version to TLSv1.2, and
requires servers to verify that it isn't SSLv3.
Fixes#6600
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6747)
Currently if you encounter application data while waiting for a
close_notify from the peer, and you have called SSL_shutdown() then
you will get a -1 return (fatal error) and SSL_ERROR_SYSCALL from
SSL_get_error(). This isn't accurate (it should be SSL_ERROR_SSL) and
isn't persistent (you can call SSL_shutdown() again and it might then work).
We change this into a proper fatal error that is persistent.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6340)
Implement support for stateful TLSv1.3 tickets, and use them if
SSL_OP_NO_TICKET is set.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6563)
Separate out as a new function the code to write out data which is specific
to a stateless ticket.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6563)
With the current mechanism, old cipher strings that used to work in 1.1.0,
may inadvertently disable all TLSv1.3 ciphersuites causing connections to
fail. This is confusing for users.
In reality TLSv1.3 are quite different to older ciphers. They are much
simpler and there are only a small number of them so, arguably, they don't
need the same level of control that the older ciphers have.
This change splits the configuration of TLSv1.3 ciphers from older ones.
By default the TLSv1.3 ciphers are on, so you cannot inadvertently disable
them through your existing config.
Fixes#5359
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5392)
Add functions that will do the work of assigning certificate, privatekey
and chain certs to an SSL or SSL_CTX. If no privatekey is given, use the
publickey. This will permit the keys to pass validation for both ECDSA
and RSA. If a private key has already been set for the certificate, it
is discarded. A real private key can be set later.
This is an all-or-nothing setting of these parameters. Unlike the
SSL/SSL_CTX_use_certificate() and SSL/SSL_CTX_use_PrivateKey() functions,
the existing cert or privatekey is not modified (i.e. parameters copied).
This permits the existing cert/privatekey to be replaced.
It replaces the sequence of:
* SSL_use_certificate()
* SSL_use_privatekey()
* SSL_set1_chain()
And may actually be faster, as multiple checks are consolidated.
The private key can be NULL, if so an ENGINE module needs to contain the
actual private key that is to be used.
Note that ECDH (using the certificate's ECDSA key) ciphers do not work
without the private key being present, based on how the private key is
used in ECDH. ECDH does not offer PFS; ECDHE ciphers should be used instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/1130)
Add SSL_verify_client_post_handshake() for servers to initiate PHA
Add SSL_force_post_handshake_auth() for clients that don't have certificates
initially configured, but use a certificate callback.
Update SSL_CTX_set_verify()/SSL_set_verify() mode:
* Add SSL_VERIFY_POST_HANDSHAKE to postpone client authentication until after
the initial handshake.
* Update SSL_VERIFY_CLIENT_ONCE now only sends out one CertRequest regardless
of when the certificate authentication takes place; either initial handshake,
re-negotiation, or post-handshake authentication.
Add 'RequestPostHandshake' and 'RequirePostHandshake' SSL_CONF options that
add the SSL_VERIFY_POST_HANDSHAKE to the 'Request' and 'Require' options
Add support to s_client:
* Enabled automatically when cert is configured
* Can be forced enabled via -force_pha
Add support to s_server:
* Use 'c' to invoke PHA in s_server
* Remove some dead code
Update documentation
Update unit tests:
* Illegal use of PHA extension
* TLSv1.3 certificate tests
DTLS and TLS behave ever-so-slightly differently. So, when DTLS1.3 is
implemented, it's PHA support state machine may need to be different.
Add a TODO and a #error
Update handshake context to deal with PHA.
The handshake context for TLSv1.3 post-handshake auth is up through the
ClientFinish message, plus the CertificateRequest message. Subsequent
Certificate, CertificateVerify, and Finish messages are based on this
handshake context (not the Certificate message per se, but it's included
after the hash). KeyUpdate, NewSessionTicket, and prior Certificate
Request messages are not included in post-handshake authentication.
After the ClientFinished message is processed, save off the digest state
for future post-handshake authentication. When post-handshake auth occurs,
copy over the saved handshake context into the "main" handshake digest.
This effectively discards the any KeyUpdate or NewSessionTicket messages
and any prior post-handshake authentication.
This, of course, assumes that the ID-22 did not mean to include any
previous post-handshake authentication into the new handshake transcript.
This is implied by section 4.4.1 that lists messages only up to the
first ClientFinished.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4964)
The new extension is like signature_algorithms, but only for the
signature *on* the certificate we will present to the peer (the
old signature_algorithms extension is still used for signatures that
we *generate*, i.e., those over TLS data structures).
We do not need to generate this extension, since we are the same
implementation as our X.509 stack and can handle the same types
of signatures, but we need to be prepared to receive it, and use the received
information when selecting what certificate to present.
There is a lot of interplay between signature_algorithms_cert and
signature_algorithms, since both affect what certificate we can
use, and thus the resulting signature algorithm used for TLS messages.
So, apply signature_algorithms_cert (if present) as a filter on what
certificates we can consider when choosing a certificate+sigalg
pair.
As part of this addition, we also remove the fallback code that let
keys of type EVP_PKEY_RSA be used to generate RSA-PSS signatures -- the
new rsa_pss_pss_* and rsa_pss_rsae_* signature schemes have pulled
the key type into what is covered by the signature algorithm, so
we should not apply this sort of compatibility workaround.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5068)
This just adds the various extension functions. More changes will be
required to actually use them.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4435)
The new ServerHello format is essentially now the same as the old TLSv1.2
one, but it must additionally include supported_versions. The version
field is fixed at TLSv1.2, and the version negotiation happens solely via
supported_versions.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4701)
Follow up from the conversion to use SSLfatal() in the state machine to
clean things up a bit more.
[extended tests]
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4778)
Sometimes at the top level of the state machine code we know we are
supposed to be in a fatal error condition. This commit adds some sanity
checks to ensure that SSLfatal() has been called.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4778)
