This boils down to the operating system sources and RDRAND.
All other sources are not available in the FIPS module.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12325)
The commit claimed to make things more consistent. In fact it makes it
less so. Revert back to the previous namig convention.
This reverts commit 765d04c946.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12186)
The commit claimed to make things more consistent. In fact it makes it
less so. Revert back to the previous namig convention.
This reverts commit d9c2fd51e2.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12186)
Everything else to do with algorithm selection and properties is case
insensitive.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12450)
Added Algorithm names AES-128-CBC-CTS, AES-192-CBC-CTS and AES-256-CBC-CTS.
CS1, CS2 and CS3 variants are supported.
Only single shot updates are supported.
The cipher returns the mode EVP_CIPH_CBC_MODE (Internally it shares the aes_cbc cipher code). This
would allow existing code that uses AES_CBC to switch to the CTS variant without breaking code that
tests for this mode. Because it shares the aes_cbc code the cts128.c functions could not be used directly.
The cipher returns the flag EVP_CIPH_FLAG_CTS.
EVP_CIPH_FLAG_FIPS & EVP_CIPH_FLAG_NON_FIPS_ALLOW have been deprecated.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12094)
This moves test/ossl_test_endian.h to include/internal/endian.h and
thereby makes the macros in there our standard way to check endianness
in run-time.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/12390)
The following built-in curves do not have an assigned OID:
- Oakley-EC2N-3
- Oakley-EC2N-4
In general we shouldn't assume that an OID is always available.
This commit detects such cases, raises an error and returns appropriate
return values so that the condition can be detected and correctly
handled by the callers, when serializing EC parameters or EC keys with
the default `ec_param_enc:named_curve`.
Fixes#12306
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12313)
EVP_CipherUpdate is supposed to return 1 for success or 0 for error.
However for GCM ciphers it was sometimes returning -1 for error.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12288)
We were not correctly passing the provider ctx down the chain during
initialisation of a new cipher ctx. Instead the provider ctx got set to
NULL.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12288)
Other ciphers return the length of the Payload for TLS as a result of an
EVP_DecryptUpdate() operation - but ChaCha20-Poly1305 did not. We change
it so that it does.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12288)
The previous commits separated out the TLS CBC padding code in libssl.
Now we can use that code to directly support TLS CBC padding and MAC
removal in provided ciphers.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12288)
Change default FIPS HMAC KEY from all-zero's
Use default FIPSKEY if not given on command line.
Make all -macopt in fipsinstall optional
Make all tests, except fipsinstall, use the default -macopt and
-mac_name flags.
Define and use FIPSDIR variable on VMS/MMS.
Also use SRCDIR/BLDDIR in SRCTOP/BLDTOP.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12235)
The new naming scheme consistently usese the `OSSL_FUNC_` prefix for all
functions which are dispatched between the core and providers.
This change includes in particular all up- and downcalls, i.e., the
dispatched functions passed from core to provider and vice versa.
- OSSL_core_ -> OSSL_FUNC_core_
- OSSL_provider_ -> OSSL_FUNC_core_
For operations and their function dispatch tables, the following convention
is used:
Type | Name (evp_generic_fetch(3)) |
---------------------|-----------------------------------|
operation | OSSL_OP_FOO |
function id | OSSL_FUNC_FOO_FUNCTION_NAME |
function "name" | OSSL_FUNC_foo_function_name |
function typedef | OSSL_FUNC_foo_function_name_fn |
function ptr getter | OSSL_FUNC_foo_function_name |
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12222)
Move the three different DRBGs to the provider.
As part of the move, the DRBG specific data was pulled out of a common
structure and into their own structures. Only these smaller structures are
securely allocated. This saves quite a bit of secure memory:
+-------------------------------+
| DRBG | Bytes | Secure |
+--------------+-------+--------+
| HASH | 376 | 512 |
| HMAC | 168 | 256 |
| CTR | 176 | 256 |
| Common (new) | 320 | 0 |
| Common (old) | 592 | 1024 |
+--------------+-------+--------+
Bytes is the structure size on the X86/64.
Secure is the number of bytes of secure memory used (power of two allocator).
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/11682)
Also separate out the TSC and RDRAND based sources into their own file in the
seeding subdirectory.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/11682)
The test RNG can provide pre-canned entropy and nonces for testing other
algorithms.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/11682)
When we're fetching an IV, there's no need to enforce that the
provided buffer is exactly the same size as the IV we want to
write into it. This might happen, for example, when
EVP_CIPHER_CTX_iv_noconst() passes sizeof(ctx->iv) (that is,
EVP_MAX_IV_LENGTH) for an AES-GCM cipher that uses a shorter IV.
AES-OCB and CCM were also affected.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12039)
OSSL_CIPHER_PARAM_IV can be accessed both as an octet string and as
an octet pointer (for routines like EVP_CIPHER_CTX_iv() that are
in a nebulous undocumented-and-might-go-away-eventually state),
the latter for when there is need to modify the actual value in
the provider.
Make sure that we consistently try to set it as both the string and pointer
forms (not just octet string) and only fail if neither version succeeds. The
generic cipher get_ctx_params routine was already doing so, but the
AES-variant-, GCM-, and CCM-specific ones were not.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12039)
Renames some "new_ex" functions to "new_with_libctx" and ensures that we
pass around the libctx AND the propq everywhere.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12159)
The previous commits made EVP_PKEY_CTX_[get|set]_group_name work for
EC and DH keys. We now extend this to ECX. Even though that keys with
these key types only have one group we still allow it to be explicitly
set so that we have only one codepath for all keys. Setting the group
name for these types of keys is optional, but if you do so it must have
the correct name.
Additionally we enable parameter generation for these keys. Parameters
aren't actually needed for this key type, but for the same reasons as
above (to ensure a single codepath for users of these algorithms) we
enable it anyway.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11914)
The previous commit added the EVP_PKEY_CTX_[get|set]_group_name
functions to work with EC groups. We now extend that to also work for
DH.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11914)
We rename these function to EVP_PKEY_CTX_get_group_name and
EVP_PKEY_CTX_set_group_name so that they can be used for other algorithms
other than EC.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11914)
With capabilities we can query a provider about what it can do.
Initially we support a "TLS-GROUP" capability.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11914)
The binder of the AIX linker needs to be told which functions to call on
loading and initializing a shared object. Therefore another configuration
variable shared_fipsflag is introduced, which is appended to shared_defflag
when the providers/fips module gets configured.
It was suggested to refactor the line in the build file template to become
more generic and less magic. There is, however, currently no suggestion how
to actually achive this, so we leave a TODO comment.
The possible shared_fipsflag must only be appended to the shared_def iff
this code is acting on behalf of the fips provider module build.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11950)
For FIPS validation purposes - Automated Cryptographic Validation Protocol (ACVP) tests need to be
performed. (See https://github.com/usnistgov/ACVP). These tests are very similiar to the old CAVS tests.
This PR uses a hardwired subset of these test vectors to perform similiar operations,
to show the usage and prove that the API's are able to perform the required operations.
It may also help with communication with the lab (i.e- The lab could add a test here to show
a unworking use case - which we can then address).
The EVP layer performs these tests instead of calling lower level API's
as was done in the old FOM.
Some of these tests require access to internals that are not normally allowed/required.
The config option 'acvp_tests' (enabled by default) has been added so that this
access may be removed.
The mechanism has been implemented as additional OSSL_PARAM values that can be set and get.
A callback mechanism did not seem to add any additional benefit.
These params will not be added to the gettables lists.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11572)
