at position -1 (prams[=1]).
The issue has been reported by coverity check.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25303)
In case of prehash or prehash-by-caller is set skip the s390x specific
acceleration an fallback to the non-accelerated code path.
Fixes: 6696682774
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25351)
The TLSProxy uses the 'ossltest' engine to produce known output for digests
and HMAC calls. However, when running on a s390x system that supports
hardware acceleration of HMAC, the engine is not used for calculating HMACs,
but the s390x specific HMAC implementation is used, which does produce correct
output, but not the known output that the engine would produce. This causes
some tests (i.e. test_key_share, test_sslextension, test_sslrecords,
test_sslvertol, and test_tlsextms) to fail.
Disable the s390x HMAC hardware acceleration if an engine is used for the
digest of the HMAC calculation. This provides compatibility for engines that
provide digest implementations, and assume that these implementations are also
used when calculating an HMAC.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25287)
The incorrectly typed data is read only, used in a compare operation, so
neither remote code execution, nor memory content disclosure were possible.
However, applications performing certificate name checks were vulnerable to
denial of service.
The GENERAL_TYPE data type is a union, and we must take care to access the
correct member, based on `gen->type`, not all the member fields have the same
structure, and a segfault is possible if the wrong member field is read.
The code in question was lightly refactored with the intent to make it more
obviously correct.
Fixes CVE-2024-6119
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/25339)
This is a follow-up to #23997
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25340)
Builds using 32 bit MinGW will fail, due to the same reasoning described in commit 2d46a44ff2.
CLA: trivial
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25025)
Use EVP_MD_is_a() instead of EVP_MD_get_type() to detect the digest
type. EVP_MD_get_type() does not always return the expected NID, e.g.
when running in the FIPS provider, EVP_MD_get_type() returns zero,
causing to skip the HMAC acceleration path.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25304)
Also improve related documentation.
- The BIO_FLAGS_BASE64_NO_NL flag did not behave as advertised, only
leading and trailing, but not internal, whitespace was supported:
$ echo 'AA AA' | openssl base64 -A -d | wc -c
0
- Switching from ignored leading input to valid base64 input misbehaved
when the length of the skipped input was one more than the length of
the second and subsequent valid base64 lines in the internal 1k
buffer:
$ printf '#foo\n#bar\nA\nAAA\nAAAA\n' | openssl base64 -d | wc -c
0
- When the underlying BIO is retriable, and a read returns less than
1k of data, some of the already buffered input lines that could have
been decoded and returned were retained internally for a retry by the
caller. This is somewhat surprising, and the new code decodes as many
of the buffered lines as possible. Issue reported by Michał Trojnara.
- After all valid data has been read, the next BIO_read(3) should
return 0 when the input was all valid or -1 if an error was detected.
This now occurs in more consistently, but further tests and code
refactoring may be needed to ensure this always happens.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25253)
We checked using 'md_nid < 0', which is faulty.
Impact: DSA and ECDSA signature provider implementations
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24992)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24992)
(in the code, "sigalg" is used to refer to these composite algorithms,
which is a nod to libcrypto and libssl, where that term is commonly used
for composite algorithms)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24992)
The fips_provider_version_* functions return true if the FIPS provider isn't
loaded. This is somewhat counterintuitive and the fix in #25327 neglected
this nuance resulting in not running the SM2 tests when the FIPS provider
wasn't being loaded.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25331)
The latest CMake exporter changes reworked the the variables in builddata.pm
and installdata.pm. Unfortunately, the pkg-config exporter templates were
forgotten in that effort.
Fixes#25299
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25308)
As reported by Alicja Kario, we ignored excess bytes after the
signature payload in TLS CertificateVerify Messages. These
should not be present.
Fixes: #25298
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25302)
On newer machines the SHA3/SHAKE performance of CPACF instructions KIMD and KLMD
can be enhanced by using additional modifier bits. This allows the application
to omit initializing the ICV, but also affects the internal processing of the
instructions. Performance is mostly gained when processing short messages.
The new CPACF feature is backwards compatible with older machines, i.e. the new
modifier bits are ignored on older machines. However, to save the ICV
initialization, the application must detect the MSA level and omit the ICV
initialization only if this feature is supported.
Signed-off-by: Joerg Schmidbauer <jschmidb@de.ibm.com>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25235)
The Argon2 KDF uses OSSL_KDF_PARAM_PROPERTIES to fetch implementations
of blake2bmac and blake2b512 if ctx->mac and ctx->md are NULL. This
isn't documented in the manpage, so users that might, for example, want
to fetch an instance of Argon2 with the -fips property query to obtain
a working Argon2 KDF even though the default property query requires
fips=yes are left wondering why this fails.
Fortunately, EVP_KDF(3)/PARAMETERS already explains what the properties
are used for, so we really just need to add a single line.
Signed-off-by: Clemens Lang <cllang@redhat.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25306)
Fixes#7940: Enhances the existing test for compression methods in the ClientHello message, aligning with RFC 8446 specifications.
Refactored the test code to improve modularity and maintainability, making it easier to extend and modify in the future.
Added checks for the appropriate alerts, ensuring that `SSL_AD_ILLEGAL_PARAMETER` or `SSL_AD_DECODE_ERROR` are correctly triggered as per the RFC 8446 guidelines.
Expanded Test Coverage: Introduced additional test cases to cover scenarios involving:
- Lists of unknown compression methods
- Absence of any compression method
- Validation of a single null compression method, which should always succeed.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25255)
Fixes#7940: Updated the compression check logic to improve protocol compliance. The code now returns `SSL_AD_DECODE_ERROR` when no compression method is provided in the ClientHello message. It returns `SSL_AD_ILLEGAL_PARAMETER` if the “null” compression method (0x00) is missing.
Additionally, refactored the related test code for enhanced readability and maintainability.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25255)
In this mode, only the ph instances are supported, and must be set
explicitly through a parameter. The caller is assumed to pass a
prehash to EVP_PKEY_{sign,verify}().
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24975)
Add EVP_PKEY_{sign,verify}_message support for our Ed25519 and Ed448
implementations, including ph and ctx variants.
Tests are added with test_evp stanzas.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24975)
The error happens with MSVC v143,C++ Clang Compiler for Windows(16.0.5)
Error is "brackets expression not supported on this target" in libcrypto-shlib-bsaes-armv8.obj.asm
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25293)
Added sm2 testcases to endecode_test.c.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25266)
For SHAKE algorithms we now return 0 from EVP_MD_size().
So all the places that check for < 0 needed to change to <= 0
(Otherwise the behaviour will be to digest nothing in most cases).
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25285)
Added the function EVP_MD_CTX_get_size_ex() which checks for XOF and
does a ctx get rather than just returning EVP_MD_size().
SHAKE did not have a get_ctx_params() so that had to be added to return the xoflen.
Added a helper function EVP_MD_xof()
EVP_MD_CTX_size() was just an aliased macro for EVP_MD_size(), so to
keep it the same I added an extra function.
EVP_MD_size() always returns 0 for SHAKE now, since it caches the value
of md_size at the time of an EVP_MD_fetch(). This is probably better
than returning the incorrect initial value it was before e.g (16 for
SHAKE128) and returning tht always instead of the set xoflen.
Note BLAKE2B uses "size" instead of "xoflen" to do a similar thing.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25285)
This issue has been discovered by osss-fuzzer [1]. The test function decodes
RSA key created by fuzzer and calls EVP_PKEY_pairwise_check() which
proceeds to ossl_bn_miller_rabin_is_prime() check which takes too long
exceeding timeout (45secs).
The idea is to fix OSSL_DECODER_from_data() code path so invalid
RSA keys will be refused.
[1] https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=69134
Test case generated by the fuzzer is added.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25190)
The options in fipsprov.c are now generated using macros with fips_indicator_params.inc.
This should keep the naming consistent.
Some FIPS related headers have moved to providers/fips/include so that
they can use fips_indicator_params.inc.
securitycheck.h now includes fipsindicator.h, and fipsindicator.h includes
fipscommon.h.
fipsinstall.c uses OSSL_PROV_PARAM_ for the configurable FIPS options rather than
using OSSL_PROV_FIPS_PARAM_* as this was confusing as to which one should be used.
fips_names.h just uses aliases now for existing public names.
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25162)
For CMake / pkg-config configuration files to be used for an uninstalled
build, the include directory in the build directory isn't enough, if that
one is separate from the source directory. The include directory in the
source directory must be accounted for too.
This includes some lighter refactoring of util/mkinstallvars.pl, with the
result that almost all variables in builddata.pm and installdata.pm have
become arrays, even though unnecessarily for most of them; it was simpler
that way. The CMake / pkg-config templates are adapted accordingly.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24918)
This template file is made to make both:
1. OpenSSLConfig.cmake (CMake config used when building a CMake package
against an uninstalled OpenSSL build)
2. exporters/OpenSSLConfig.cmake (CMake config that's to be installed
alongside OpenSSL, and is used when building a CMake package against
an OpenSSL installation).
Variant 1 was unfortunately getting the internal '_ossl_prefix' variable
wrong, which is due to how the perl snippet builds the command(s) to figure
out its value. That needed some correction.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24918)
This should be sufficient to cover the intent with the following legacy ctrls:
- EVP_PKEY_CTRL_PKCS7_ENCRYPT (through EVP_ASYM_CIPHER implementations)
- EVP_PKEY_CTRL_PKCS7_DECRYPT (through EVP_ASYM_CIPHER implementations)
- EVP_PKEY_CTRL_PKCS7_SIGN (through EVP_SIGNATURE implementations)
- EVP_PKEY_CTRL_CMS_ENCRYPT (through EVP_ASYM_CIPHER implementations)
- EVP_PKEY_CTRL_CMS_DECRYPT (through EVP_ASYM_CIPHER implementations)
- EVP_PKEY_CTRL_CMS_SIGN (through EVP_SIGNATURE implementations)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25000)
EVP_CIPHER_CTX_set_algor_params() and EVP_CIPHER_CTX_set_algor_params() can
be used instead of EVP_CIPHER_asn1_to_param() and EVP_CIPHER_param_to_asn1().
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25000)
I realised that any application that passes AlgorithmIdentifier parameters
to and from a provider may also be interested in the full AlgorithmIdentifier
of the implementation invocation.
Likewise, any application that wants to get the full AlgorithmIdentifier
from an implementation invocation may also want to pass AlgorithmIdentifier
parameters to that same implementation invocation.
These amendments should be useful to cover all intended uses of the legacy
ctrls for PKCS7 and CMS:
- EVP_PKEY_CTRL_PKCS7_ENCRYPT
- EVP_PKEY_CTRL_PKCS7_DECRYPT
- EVP_PKEY_CTRL_PKCS7_SIGN
- EVP_PKEY_CTRL_CMS_ENCRYPT
- EVP_PKEY_CTRL_CMS_DECRYPT
- EVP_PKEY_CTRL_CMS_SIGN
It should also cover a number of other cases that were previously implemented
through EVP_PKEY_ASN1_METHOD, as well as all sorts of other cases where the
application has had to assemble a X509_ALGOR on their own.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25000)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24754)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24754)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24754)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24754)
X25519 and X448 are unapproved in FIPS 140-3
So always trigger the indicator callback if these Keys are used,
and add "fips-indicator" getters that return 0.
This has been added to keygen and key exchange.
(KEM will also require it if ever becomes a FIPS algorithm).
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/25246)
