Fixes#11864
- The dsa keygen assumed valid p, q, g values were being passed. If this is not correct then it is
possible that dsa keygen can either hang or segfault.
The fix was to do a partial validation of p, q, and g inside the keygen.
- Fixed a potential double free in the dsa keypair test in the case when in failed (It should never fail!).
It freed internal object members without setting them to NULL.
- Changed the FFC key validation to accept 1024 bit keys in non fips mode.
- Added tests that use both the default provider & fips provider to test these cases.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12176)
Improper use of negative value (It just needs to pass zero instead of -1).
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/12237)
For FIPS validation purposes - Automated Cryptographic Validation Protocol (ACVP) tests need to be
performed. (See https://github.com/usnistgov/ACVP). These tests are very similiar to the old CAVS tests.
This PR uses a hardwired subset of these test vectors to perform similiar operations,
to show the usage and prove that the API's are able to perform the required operations.
It may also help with communication with the lab (i.e- The lab could add a test here to show
a unworking use case - which we can then address).
The EVP layer performs these tests instead of calling lower level API's
as was done in the old FOM.
Some of these tests require access to internals that are not normally allowed/required.
The config option 'acvp_tests' (enabled by default) has been added so that this
access may be removed.
The mechanism has been implemented as additional OSSL_PARAM values that can be set and get.
A callback mechanism did not seem to add any additional benefit.
These params will not be added to the gettables lists.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11572)
This macro is used to determine if certain pieces of code should
become part of the FIPS module or not. The old name was confusing.
Fixes#11538
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11539)
DH_set0_pqg() is now responsible for caching the nid, q and length.
DH with or without named safe prime groups now default to using the maximum private key length (BN_num_bits(q) - 1)
when generating a DH private key. The code is now shared between fips and non fips mode for DH key generation.
The OSSL_PKEY_PARAM_DH_PRIV_LEN parameter can be used during keygen to override the maximum private key length to be
in the range (2 * strength ... bits(q) - 1). Where the strength depends on the length of p.
Added q = (p - 1) / 2 safe prime BIGNUMS so that the code is data driven (To simplify adding new names).
The BIGNUMS were code generated.
Fix error in documented return value for DH_get_nid
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11562)
Previously import_to just took an EVP_PKEY as the argument. However we
need to some additional context data as well - specifically the libctx.
Therefore we pass an EVP_PKEY_CTX instead to hold the combination of
both of these things.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11536)
Don't wrap conditionally-compiled files in global ifndef tests.
Instead, test if the feature is disabled and, if so, do not
compile it.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11263)
Moved some shared FFC code into the FFC files.
Added extra paramgen parameters for seed, gindex.
Fixed bug in ossl_prov util to print bignums.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11303)
The EC export_to function calls EC_POINT_point2buf that can later
generate a random number in some circumstances. Therefore we pass in a
BN_CTX associated with the library context. This means we have to change
the export_to function signature to accept the library context.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11493)
Since this is public, it is best to make the underlying structure opaque.
This means converting from stack allocation to dynamic allocation for all
usages.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11390)
The catalyst for this is the difficult of passing BNs through the other
OSSL_PARAM APIs.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11390)
Downgrading EVP_PKEYs from containing provider side internal keys to
containing legacy keys demands support in the EVP_PKEY_ASN1_METHOD.
This became a bit elaborate because the code would be almost exactly
the same as the import functions int EVP_KEYMGMT. Therefore, we end
up moving most of the code to common backend support files that can be
used both by legacy backend code and by our providers.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11375)
The export-to-provider functions for DH, DSA and EC_KEY assumed that a
public key is always present, and would fail if not. This blocks any
attempt to export a key structure with only domain parameters.
While fixing this, we also modify the selection declaration to
evp_keymgmt_import() to be more adaptive, the diverse selection bits
are now added when the corresponding data is added to the OSSL_PARAM
array.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11374)
in particular X509_NAME*, X509_STORE{,_CTX}*, and ASN1_INTEGER *,
also some result types of new functions, which does not break compatibility
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/10504)
The EVP_PKEY_ASN1_METHOD function export_to() must check that the key
we're trying to export has a known libcrypto method, i.e. is a built
in RSA_METHOD, DSA_METHOD, etc. Otherwise, the method may be defined
by the calling application, by an engine, by another library, and we
simply cannot know all the quirks hidden behind that method, if we
have access to the key data, or much anything.
Such keys are simply deemed impossible to export to provider keys,
i.e. have export_to() return 0. This cascades back to functions like
evp_pkey_export_to_provider() and evp_pkey_upgrade_to_provider() and
their callers. In most cases, this is fine, but if these get mixed in
with provider side keys in any function, that function will fail.
Fixes#11179Fixes#9915
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11193)
Made macro names that refer to a known base OID, an commented accordingly.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10557)
Embed libctx in dsa and dh objects and cleanup internal methods to not pass libctx (This makes it consistent with the rsa changes)
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10910)
Use of the low level DSA functions has been informally discouraged for a
long time. We now formally deprecate them.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10977)
The KEYMGMT libcrypto <-> provider interface currently makes a few
assumptions:
1. provider side domain parameters and key data isn't mutable. In
other words, as soon as a key has been created in any (loaded,
imported data, ...), it's set in stone.
2. provider side domain parameters can be strictly separated from the
key data.
This does work for the most part, but there are places where that's a
bit too rigid for the functionality that the EVP_PKEY API delivers.
Key data needs to be mutable to allow the flexibility that functions
like EVP_PKEY_copy_parameters promise, as well as to provide the
combinations of data that an EVP_PKEY is generally assumed to be able
to hold:
- domain parameters only
- public key only
- public key + private key
- domain parameters + public key
- domain parameters + public key + private key
To remedy all this, we:
1. let go of the distinction between domain parameters and key
material proper in the libcrypto <-> provider interface.
As a consequence, functions that still need it gain a selection
argument, which is a set of bits that indicate what parts of the
key object are to be considered in a specific call. This allows
a reduction of very similar functions into one.
2. Rework the libcrypto <-> provider interface so provider side key
objects are created and destructed with a separate function, and
get their data filled and extracted in through import and export.
(future work will see other key object constructors and other
functions to fill them with data)
Fixes#10979
squash! Redesign the KEYMGMT libcrypto <-> provider interface - the basics
Remedy 1 needs a rewrite:
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11006)
This is required in order to share code for FIPS related parameter generation and validation routinues.
Note the 'counter' field is now stored as a integer (as that is the form required for generation/validation functions).
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10860)
These fields are purely application data, and applications don't reach
into the bowels of the FIPS module, so these fields are never used
there.
Fixes#10835
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10837)
Previous macros suggested that from 3.0, we're only allowed to
deprecate things at a major version. However, there's no policy
stating this, but there is for removal, saying that to remove
something, it must have been deprecated for 5 years, and that removal
can only happen at a major version.
Meanwhile, the semantic versioning rule is that deprecation should
trigger a MINOR version update, which is reflected in the macro names
as of this change.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10364)
Add a new API to test for primes that can't be misused, deprecated the
old APIs.
Suggested by Jake Massimo and Kenneth Paterson
Reviewed-by: Paul Dale <paul.dale@oracle.com>
GH: #9272
Also added blanks lines after declarations in a couple of places.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9916)
Apart from public and internal header files, there is a third type called
local header files, which are located next to source files in the source
directory. Currently, they have different suffixes like
'*_lcl.h', '*_local.h', or '*_int.h'
This commit changes the different suffixes to '*_local.h' uniformly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)
Currently, there are two different directories which contain internal
header files of libcrypto which are meant to be shared internally:
While header files in 'include/internal' are intended to be shared
between libcrypto and libssl, the files in 'crypto/include/internal'
are intended to be shared inside libcrypto only.
To make things complicated, the include search path is set up in such
a way that the directive #include "internal/file.h" could refer to
a file in either of these two directoroes. This makes it necessary
in some cases to add a '_int.h' suffix to some files to resolve this
ambiguity:
#include "internal/file.h" # located in 'include/internal'
#include "internal/file_int.h" # located in 'crypto/include/internal'
This commit moves the private crypto headers from
'crypto/include/internal' to 'include/crypto'
As a result, the include directives become unambiguous
#include "internal/file.h" # located in 'include/internal'
#include "crypto/file.h" # located in 'include/crypto'
hence the superfluous '_int.h' suffixes can be stripped.
The files 'store_int.h' and 'store.h' need to be treated specially;
they are joined into a single file.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)
using PCC and KDSA instructions.
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10004)
The output C code was made to use ERR_func_error_string() to see if a
string table was already loaded or not. Since this function returns
NULL always, this check became useless.
Change it to use ERR_reason_error_string() instead, as there's no
reason to believe we will get rid of reason strings, ever.
To top it off, we rebuild all affected C sources.
Fixes#9756
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9756)
Adds simple utility functions to allow both the default and fips providers to
encode and decode DSA-Sig-Value and ECDSA-Sig-Value (DSA_SIG and ECDSA_SIG
structures) to/from ASN.1 DER without requiring those providers to have a
dependency on the asn1 module.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9111)
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/9288)
The #7408 implemented mandatory digest checking in TLS.
However this broke compatibility of DSS support with GnuTLS
which supports only SHA1 with DSS.
There is no reason why SHA256 would be a mandatory digest
for DSA as other digests in SHA family can be used as well.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9015)
