There are a number of symbols in bn which are internal only and never used
by anything. They should be removed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2766)
This removes the fips configure option. This option is broken as the
required FIPS code is not available.
FIPS_mode() and FIPS_mode_set() are retained for compatibility, but
FIPS_mode() always returns 0, and FIPS_mode_set() can only be used to
turn FIPS mode off.
Reviewed-by: Stephen Henson <steve@openssl.org>
I don't think this actually affects anything since the cfi_restore
directives aren't strictly needed anyway. (The old values are still in
memory so either will do.)
CLA: trivial
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2582)
- harmonize handlers with guidelines and themselves;
- fix some bugs in handlers;
- add missing handlers in chacha and ecp_nistz256 modules;
Reviewed-by: Rich Salz <rsalz@openssl.org>
The BIGNUM behaviour is supposed to be "consistent" when going into and
out of APIs, where "consistent" means 'top' is set minimally and that
'neg' (negative) is not set if the BIGNUM is zero (which is iff 'top' is
zero, due to the previous point).
The BN_DEBUG testing (make test) caught the cases that this patch
corrects.
Note, bn_correct_top() could have been used instead, but that is intended
for where 'top' is expected to (sometimes) require adjustment after direct
word-array manipulation, and so is heavier-weight. Here, we are just
catching the negative-zero case, so we test and correct for that
explicitly, in-place.
Change-Id: Iddefbd3c28a13d935648932beebcc765d5b85ae7
Signed-off-by: Geoff Thorpe <geoff@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1672)
Couple of updates to make this code work properly again;
* use OPENSSL_assert() instead of assert() (and #include <assert.h>)
* the circular-dependency-avoidance uses RAND_bytes() (not pseudo)
Change-Id: Iefb5a9dd73f71fd81c1268495c54a64378955354
Signed-off-by: Geoff Thorpe <geoff@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1672)
The bug was introduced in 80d27cdb84,
one too many instructions was removed. It went unnoticed, because
new subroutine introduced in previous commit is called in real-life
RSA/DSA/DH cases, while original code is called only in rare tests.
The bug was caught in test_fuzz.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Factorise multiple bn_get_top(group->field) calls
Add missing checks on some conditional BN_copy return value
Add missing checks on some BN_copy return value
Add missing checks on a few bn_wexpand return value
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1626)
Now that we can link specifically with static libraries, the immediate
need to split ppccap.c (and eventually other *cap.c files) is no more.
This reverts commit e3fb4d3d52.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Having that code in one central object file turned out to cause
trouble when building test/modes_internal_test.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1883)
BN_RECP_CTX_new direclty use bn_init to avoid twice memset calls
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1879)
Align at 5 characters, not 4. There are 5-digit numbers in the output.
Also avoid emitting an extra blank line and trailing whitespace.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
The prevailing style seems to not have trailing whitespace, but a few
lines do. This is mostly in the perlasm files, but a few C files got
them after the reformat. This is the result of:
find . -name '*.pl' | xargs sed -E -i '' -e 's/( |'$'\t'')*$//'
find . -name '*.c' | xargs sed -E -i '' -e 's/( |'$'\t'')*$//'
find . -name '*.h' | xargs sed -E -i '' -e 's/( |'$'\t'')*$//'
Then bn_prime.h was excluded since this is a generated file.
Note mkerr.pl has some changes in a heredoc for some help output, but
other lines there lack trailing whitespace too.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Never output -0; make "negative zero" an impossibility.
Do better checking on BN_rand top/bottom requirements and #bits.
Update doc.
Ignoring trailing garbage in BN_asc2bn.
Port this commit from boringSSL: https://boringssl.googlesource.com/boringssl/+/899b9b19a4cd3fe526aaf5047ab9234cdca19f7d%5E!/
Ensure |BN_div| never gives negative zero in the no_branch code.
Have |bn_correct_top| fix |bn->neg| if the input is zero so that we
don't have negative zeros lying around.
Thanks to Brian Smith for noticing.
Reviewed-by: Richard Levitte <levitte@openssl.org>
MIPS[32|64]R6 is binary and source incompatible with previous MIPS ISA
specifications. Fortunately it's still possible to resolve differences
in source code with standard pre-processor and switching to trap-free
version of addition and subtraction instructions.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The bound on log(2)/3 on the second line is incorrect and has an extra
zero compared to the divisions in the third line. log(2)/3 = 0.10034...
which is bounded by 0.101 and not 0.1001. The divisions actually
correspond to 0.101 which is fine. The third line also dropped a factor
of three.
The actual code appears to be fine. Just the comments are wrong.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Original strategy for page-walking was adjust stack pointer and then
touch pages in order. This kind of asks for double-fault, because
if touch fails, then signal will be delivered to frame above adjusted
stack pointer. But touching pages prior adjusting stack pointer would
upset valgrind. As compromise let's adjust stack pointer in pages,
touching top of the stack. This still asks for double-fault, but at
least prevents corruption of neighbour stack if allocation is to
overstep the guard page.
Also omit predict-non-taken hints as they reportedly trigger illegal
instructions in some VM setups.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Fix an off by one error in the overflow check added by 07bed46f33
("Check for errors in BN_bn2dec()").
Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
If an oversize BIGNUM is presented to BN_bn2dec() it can cause
BN_div_word() to fail and not reduce the value of 't' resulting
in OOB writes to the bn_data buffer and eventually crashing.
Fix by checking return value of BN_div_word() and checking writes
don't overflow buffer.
Thanks to Shi Lei for reporting this bug.
CVE-2016-2182
Reviewed-by: Tim Hudson <tjh@openssl.org>
extra spacing and 80 cols
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1366)
Fix some indentation at the same time
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1292)
Now that INCLUDE considers both the source and build trees, no need
for the rel2abs perl fragment hacks any more.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1264)
As of 37258dadaa and the corresponding upstream
change, BN_mod_word may fail, like BN_div_word. Handle this properly. Thanks to
Brian Smith for pointing this out. See BoringSSL's
44bedc348d9491e63c7ed1438db100a4b8a830be.
Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
GH: #1251
This function returns a tri-state -1 on error. See BoringSSL's
53409ee3d7595ed37da472bc73b010cd2c8a5ffd.
Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
GH: #1251
Files like dh.pod, etc., mostly duplicated the API-specific pod files.
Removed the duplicated content; that often mean the whole file could
be removed. Some of the content about internals got moved into README
files in the source tree. Some content (e.g., err.pod) got moved
into other pod pages.
Annotate generic pages, remove dup NAME
Reviewed-by: Richard Levitte <levitte@openssl.org>
On systems where we do not have BN_ULLONG (e.g. typically 64 bit systems)
then BN_mod_word() can return incorrect results if the supplied modulus is
too big.
RT#4501
Reviewed-by: Andy Polyakov <appro@openssl.org>
Numerous test failures were occuring when Configured with enable-ubsan
although they could all be traced back to one issue.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Add copyright to missing assembler files.
Add copyrights to missing test/* files.
Add copyrights
Various source and misc files.
Reviewed-by: Richard Levitte <levitte@openssl.org>
When RAND_pseudo_bytes() was replaced with RAND_bytes(), this case
was not reduced to a simple RAND_bytes() call.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1117)
Commit 91fb42dd fixed a leak but introduced a problem where a parameter
is erroneously freed instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
In BN_generate_prime_ex() we do some sanity checks first and return
with an error if they fail. We should do that *before* allocating any
resources to avoid a memory leak.
Reviewed-by: Richard Levitte <levitte@openssl.org>
In the BN_mpi2bn() function, a failure of a call to BN_bin2bn() could
result in the leak of a previously allocated BIGNUM value.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The Unix build was the last to retain the classic build scheme. The
new unified scheme has matured enough, even though some details may
need polishing.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add copyright to most .pl files
This does NOT cover any .pl file that has other copyright in it.
Most of those are Andy's but some are public domain.
Fix typo's in some existing files.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Make OBJ_name_cmp internal
Rename idea_xxx to IDEA_xxx
Rename get_rfc_xxx to BN_get_rfc_xxx
Rename v3_addr and v3_asid functions to X509v3_...
Reviewed-by: Richard Levitte <levitte@openssl.org>
As it turns out branch hints grew as kind of a misconception. In
addition their interpretation by GNU assembler is affected by
assembler flags and can end up with opposite meaning on different
processors. As we have to loose quite a lot on misinterprerations,
especially on newer processors, we just omit them altogether.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Since NDEBUG is defined unconditionally on command line for release
builds, we can omit *_DEBUG options in favour of effective "all-on"
in debug builds exercised though CI.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
The reason to do so is that some of the generators detect PIC flags
like -fPIC and -KPIC, and those are normally delivered in LD_CFLAGS.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Some of these scripts would recognise an output parameter if it looks
like a file path. That works both in both the classic and new build
schemes. Some fo these scripts would only recognise it if it's a
basename (i.e. no directory component). Those need to be corrected,
as the output parameter in the new build scheme is more likely to
contain a directory component than not.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Before the 'Introduce the "pic" / "no-pic" config option' commit, the
shared_cflag value for the chosen config would be part of the make
variable CFLAG, which got replicated into CFLAGS and ASFLAGS.
Since said commit, the shared_cflag value has become a make variable
of its own, SHARED_CFLAG (which is left empty in a "no-pic" build).
However, ASFLAGS was forgotten. That's what's corrected with this
change.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Make all scripts produce .S, make interpretation of $(CFLAGS)
pre-processor's responsibility, start accepting $(PERLASM_SCHEME).
[$(PERLASM_SCHEME) is redundant in this case, because there are
no deviataions between Solaris and Linux assemblers. This is
purely to unify .pl->.S handling across all targets.]
Reviewed-by: Richard Levitte <levitte@openssl.org>
This gets rid of the BEGINRAW..ENDRAW sections in crypto/bn/build.info.
This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Some OSes, *cough*-dows, insist on stack being "wired" to
physical memory in strictly sequential manner, i.e. if stack
allocation spans two pages, then reference to farmost one can
be punishable by SEGV. But page walking can do good even on
other OSes, because it guarantees that villain thread hits
the guard page before it can make damage to innocent one...
Reviewed-by: Rich Salz <rsalz@openssl.org>
Most of the assembly uses constants from arm_arch.h, but a few references to
ARMV7_NEON don't. Consistently use the macros everywhere.
Signed-off-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
and reorganize/harmonize post-conditions.
Additional hardening following on from CVE-2016-0702
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
At the same time remove miniscule bias in final subtraction.
Performance penalty varies from platform to platform, and even with
key length. For rsa2048 sign it was observed to be 4% for Sandy
Bridge and 7% on Broadwell.
CVE-2016-0702
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
