The server port was hard coded to 8186. That could make for some
"interesting" effects if two instances of this same test was running
on the same machine.
This change binds the server interface with port 0, and captures the
resulting random port.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22025)
Some old glibc versions have recvmmsg but not sendmmsg. We require both to
use that functionality. Introduce a test to check we have a sufficiently
recent version of glibc.
Fixes#22021
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/22036)
If there is an issue with setting up the test environment in this test,
pid is not set so stop_server kills the perl process. A guard has been
added to prevent this situation.
Fixes: #22014
Signed-off-by: Randall S. Becker <randall.becker@nexbridge.ca>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22015)
This assembly implementation for ChaCha20 includes three code paths:
scalar path, 128-bit LSX path and 256-bit LASX path. We prefer the
LASX path or LSX path if the hardware and system support these
extensions.
There are 32 vector registers avaialable in the LSX and LASX
extensions. So, we can load the 16 initial states and the 16
intermediate states of ChaCha into the 32 vector registers for
calculating in the implementation. The test results on the 3A5000
and 3A6000 show that this assembly implementation significantly
improves the performance of ChaCha20 on LoongArch based machines.
The detailed test results are as following.
Test with:
$ openssl speed -evp chacha20
3A5000
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes 16384 bytes
C code 178484.53k 282789.93k 311793.70k 322234.99k 324405.93k 324659.88k
assembly code 223152.28k 407863.65k 989520.55k 2049192.96k 2127248.70k 2131749.55k
+25% +44% +217% +536% +556% +557%
3A6000
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes 16384 bytes
C code 214945.33k 310041.75k 340724.22k 349949.27k 352925.01k 353140.74k
assembly code 299151.34k 492766.34k 2070166.02k 4300909.91k 4473978.88k 4499084.63k
+39% +59% +508% +1129% +1168% +1174%
Signed-off-by: Min Zhou <zhoumin@loongson.cn>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21998)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22019)
when used in conjunction with -out and -modulus options.
Fixes#21403
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22026)
socket.h has been modified so that poll.h is omitted for OPENSSL_SYS_NONSTOP
builds. The platform configuration is derived from UNIX so the include is
only omitted for NonStop but kept in the OPENSSL_SYS_UNIX include block.
Fixes: #22001
Signed-off-by: Randall S. Becker <randall.becker@nexbridge.ca>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22006)
This is done using the define __NSK_OPTIONAL_TYPES__ and is specific to the
NonStop platform builds.
Fixes: #22002
Signed-off-by: Randall S. Becker <randall.becker@nexbridge.ca>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22005)
Strictly speaking the previous code was still correct since BIO_set_fd
is tolerant of a NULL BIO. But this way is more clear.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21950)
A couple of the demos missed a call to this function in an error case.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21950)
Add additional commentary to the non-blocking examples explaining where to
add code to go and do other useful work.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21950)
Show how to write a QUIC client using a non-blocking socket
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21950)
Show how to write a TLS client using a non-blocking socket
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21950)
In the error handling case the memory in
vb->users_pwd was accidentally not released.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21981)
When the provider's load function returned with an error, the libcrypto
error flag was only set if EOF hadn't been reached. This is troublesome,
as an error can very well occur during the last load before EOF is reached!
Also, the error flag was never reset, even though documentation specifies
that it should indicate an error in the last load (i.e. not the one before
that).
Fixes#21968
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21976)
Because apps/lib/http_server.c had a hard coded "[::]" for the accept host,
80-test_cmp_http.t assumed that it would always get a CMP server on an IPv6
address, and tested for that.
With the fix in apps/lib/http_server.c, that test was of course doomed to
fail. Since CMP should be about IP version testing, 80-test_cmp_http.t is
adapted to allow the Mock server to accept connections on either IP version,
and the test for IPv6 is removed.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21989)
Using "*:{port}" is preferred to "[::]:{port}", because it won't break on
IPv4-only machines.
This fixes test failures in 79-test_http.t and 80-test_ssl_new.t on machines
without IPv6.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21989)
The valtype value of dkeyform defined in the s_server_options structure is F, which leads to the judgment that the engine is not supported when processing parameters in the opt_next function.
This the valtype value of dkeyform should be changed to "f".
CLA: trivial
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21982)
Fixes#21977
Signed-off-by: Min Zhou <zhoumin@loongson.cn>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21978)
The plan at the moment is to validate 3.1.2 all going well.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21962)
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21937)
There is a rarely used feature that can be enabled
with `./config enable-crypto-mdebug` when additionally
the environment variable OPENSSL_MALLOC_FAILURES is used.
It turns out to be possible that CRYPTO_zalloc may
create a leak when the memory is allocated and then
the shouldfail happens, then the memory is lost.
Likewise when OPENSSL_realloc is used with size=0,
then the memory is to be free'd but here the shouldfail
check is too early, and the failure may prevent the
memory to be freed thus creating a bogus memory leak.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21944)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21659)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21659)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21659)
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/21959)
The test encrypted RSA key with DES3 which is still
allowed in the 3.0 fips provider.
Instead use the traditional key format that uses MD5
to create the password based key. MD5 is disallowed
in the 3.0 fips provider.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/21957)
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21958)
Other similar macros can be implemented later. Right now, this are the most
likely to be actually useful
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21951)
