Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Saša Nedvědický <sashan@openssl.org>
Reviewed-by: Hugo Landau <hlandau@devever.net>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25297)
Enabling this breaks FIPS compliance unless an entropy assessment and a revalidation
are undertaken.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/25498)
In the webinar we are currently producing on debugging openssl
applications, we talk about ways to allow debugable binaries without
having to ship all the debug DWARF information to production systems.
Add an optional target to do that DWARF separation to aid users
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25174)
Using this option disables the OpenSSL FIPS provider
self tests.
This is intended for debugging purposes only,
as it breaks FIPS compliance.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25063)
This entropy source can be used instead of SEED-SRC. Sample
openssl.cnf configuration is provided. It is built as a separate
provider, because it is likely to require less frequent updates than
fips provider. The same build likely can span multiple generations of
FIPS 140 standard revisions.
Note that rand-instances currently chain from public/private instances
to primary, prior to consuming the seed. Thus currently a unique ESV
needs to be obtained, and resue of jitterentropy.a certificate is not
possible as is. Separately a patch will be sent to allow for
unchaining public/private RAND instances for the purpose of reusing
ESV.
Also I do wonder if it makes sense to create a fips variant of stock
SEED-SRC entropy source, which in addition to using getrandom() also
verifies that the kernel is operating in FIPS mode and thus is likely
a validated entropy source. As in on Linux, check that
/proc/sys/crypto/fips_enabled is set to 1, and similar checks on
Windows / MacOS and so on.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24844)
Clean up of unsuable / no-op code.
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24465)
- add test vectors for tls1_3 integrity-only ciphers
- recmethod_local.h: add new member for MAC
- tls13_meth.c: add MAC only to tls 1.3
- tls13_enc.c: extend function to add MAC only
- ssl_local.h: add ssl_cipher_get_evp_md_mac()
- s3_lib.c: add the new ciphers and add #ifndef OPENSSL_NO_INTEGRITY_ONLY_CIPHERS
- ssl_ciph.c : add ssl_cipher_get_evp_md_mac() and use it
- tls13secretstest.c: add dummy test function
- Configure: add integrity-only-ciphers option
- document the new ciphers
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22903)
The documentation is slightly incorrect about the FIPS hmac key.
CLA: trivial
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23846)
This fixes an issue with a mix of atexit() usage in DLL and statically linked
libcrypto that came out in the test suite on NonStop, which has slightly
different DLL unload processing semantics compared to Linux. The change
allows a build configuration to select whether to register OPENSSL_cleanup()
with atexit() or not, so avoid situations where atexit() registration causes
SIGSEGV.
INSTALL.md and CHANGES.md have been modified to include and describe this
option.
The no-atexit option has been added to .github/workflows/run-checker-daily.yml.
Fixes: #23135
Signed-of-by: Randall S. Becker <randall.becker@nexbridge.ca>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/23394)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22356)
Ensure builds enable QUIC without explicitly having to ask for it. To
disable QUIC pass "no-quic" to Configure.
As a result we can remove all use of "enable-quic" from the various CI
runs.
We also add a CHANGES and NEWS entry for QUIC support.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21332)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21212)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21217)
Typos in doc/man* will be fixed in a different commit.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20910)
The libcrypto library uses shared library pinning to prevent its
cleanup handlers from crashing at program termination because of a
premature unloading of the shared library.
However, shared library pinning is enabled also for static builds,
which may lead to surpising behaviour if libcrypto is linked
statically to a shared third-party library, because in this case
the third-party library gets pinned.
This surprising behaviour is caused by the fact that the `no-shared`
configure option does not imply `no-pinshared`. Since this quirk
can't be changed without potentially breaking existing code, we just
document it here and provide a workaround.
Fixes#20977
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20985)
If the user specifies an alternative build file than the default, this
alternative is recorded in $config{build_file}, not $target{build_file}.
Therefore, the former should be used, leaving the latter as a mere default.
This is a bug. While fixing it, document it better too.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20173)
CLA:trivial
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19882)
Some primitives are designed to be used in a multi-threaded environment,
if supported, e.g., Argon2.
This patch adds support for preemptive threading and basic synchronization
primitives for platforms compliant with POSIX threads or Windows CRT.
Native functions are wrapped to provide a common (internal) API.
Threading support can be disabled at compile time. If enabled, threading
is disabled by default and needs to be explicitly enabled by the user.
Thread enablement requires an explicit limit on the number of threads that
OpenSSL may spawn (non-negative integer/infinity). The limit may be changed.
Signed-off-by: Čestmír Kalina <ckalina@redhat.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12255)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/19262)
CLA: trivial
Actually there is no option called `no-{ssl|tls|tls1_3|dtls}-method`.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18872)
Supports Linux, MacOS and FreeBSD
Disabled by default, enabled via `enabled-tfo`
Some tests
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8692)
Looks more like manpage format. :)
Also remove `{{..}}` notation and rewrite around it.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16329)
Different tests may use unexpectedly different versions of perl,
depending on whether they hardcode the path to the perl executable or if
they resolve the path from the environment. This fixes it so that the
same perl is always used.
Fix some trailing whitespace and spelling mistakes as well.
CLA: trivial
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16362)
And document the -w option
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16325)
Describe current relationship between config and Configure.
Put the environment variable list in alphabetical order.
Add description of KERNEL_BITS.
Add new variable CONFIG_NOWAIT.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16325)
There doesn't appear to be a good reason to omit protocol message tracing by default.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15665)
Use it in the automated workflows.
Fixes: #15247
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15248)
A pair of the disabled string checks were incorrect.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/15082)
Note that configuration and installation procedure has changed:
- The FIPS provider is now disabled by default and needs to
be enabled by configuring with `enable-fips`.
- If the FIPS provider is enabled, it gets installed automatically.
There is no extra installation step required anymore.
This is more natural and coincides with the expectation of the
user, namely "what's configured, gets installed".
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13684)
Some requirements and build hints for assembler modules compilation were
moved from doc/man3/OPENSSL_ia32cap.pod to INSTALL.md.
Fixes#14674
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14683)
