HPE has a weird preference to prefix letters and zero-padding. Properly trim
them before processing.
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22891)
In 160f48941d I made L_ENDIAN defined when the system is guessed to be
linux64-loongarch64. Unfortunately now I found it problematic:
1. This should be added into Configurations/10-main.conf, not here.
Having it here causes a different configuration when
linux64-loongarch64 is explicitly specified than guessed.
2. With LTO enabled, this causes many test failures on
linux64-loongarch64 due to #12247.
So I think we should remove it for now (master and 3.2 branch), and
reintroduce it to Configurations/10-main.conf when we finally sort
out #12247.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22812)
VSI C on OpenVMS for x86_64 has a bit more information than on other
hardware. This is no doubt because it's based on LLVM which leaves an
opening for cross compilation.
VSI C on Itanium:
$ CC/VERSION
VSI C V7.4-001 on OpenVMS IA64 V8.4-2L3
VSI C on x86_64:
$ CC/VERSION
VSI C x86-64 X7.4-843 (GEM 50XB9) on OpenVMS x86_64 V9.2-1
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22792)
libabigail is currenly only validating symbol presence and version
information in ci. We should also be validating function parameters,
types, etc. To do this we need to build the library with -g so the
dwarf information is available for libabigail to interrogate
while we're at it, also add a script to re-generate the xml that abidiff
uses for comparison during ci runs, to make updates easier
Fixes#22712
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22713)
CMake's older package finder, FindOpenSSL.cmake, does a best guess effort
and doesn't always get it right.
By CMake's own documentation, that's what such modules are (best effort
attempts), and package producers are (strongly) encouraged to help out by
producing and installing <PackageName>Config.cmake files to get a more
deterministic configuration.
The resulting OpenSSLConfig.cmake tries to mimic the result from CMake's
FindOpenSSL.cmake, by using the same variable and imported target names.
It also adds a few extra variables of its own, such as:
OPENSSL_MODULES_DIR Indicates the default installation directory
for OpenSSL loadable modules, such as providers.
OPENSSL_RUNTIME_DIR Indicates the default runtime directory, where
for example the openssl program is located.
OPENSSL_PROGRAM Is the full directory-and-filename of the
openssl program.
The imported targets OpenSSL::Crypto and OpenSSL::SSL are as precisely
specified as possible, so for example, they are specified with the both the
import library and the DLL on Windows, which should make life easier on that
platform.
For the moment, one of the following must be done in your CMake project for
this CMake configuration to take priority over CMake's FindOpenSSL.cmake:
- The variable CMAKE_FIND_PACKAGE_PREFER_CONFIG must be set to true prior
to the 'find_package(OpenSSL)' call.
- The 'find_package' call itself must use the "Full Signature". If you
don't know any better, simply add the 'CONFIG' option, i.e. from this
example:
find_package(OpenSSL 3.0 REQUIRED)
to this:
find_package(OpenSSL 3.0 REQUIRED CONFIG)
Just as with the 'pkg-config' exporters, two variants of the .cmake files
are produced:
- Those in 'exporters/' are installed in the location that 'pkg-config'
itself prefers for installed packages.
- Those in the top directory are to be used when it's desirable to build
directly against an OpenSSL build tree.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20878)
The pkg-config exporters were a special hack, all in
Configurations/unix-Makefile.tmpl, and this was well and good as long
as that was the only main package interface configuration system that we
cared about.
Things have changed, though, so we move the pkg-config production to be
templatable in a more flexible manner. Additional templates for other
interface configuration systems can then be added fairly easily.
Two variants of the .pc files are produced:
- Those in 'exporters/' are installed in the location that 'pkg-config'
itself prefers for installed packages.
- Those in the top directory are to be used when it's desirable to build
directly against an OpenSSL build tree.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20878)
Also sync libcrypto.num and libssl.num with 3.2 branch and
fix the EVP_DigestSqueeze symbol version.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/22688)
Fixes#7894
This allows SHAKE to squeeze multiple times with different output sizes.
The existing EVP_DigestFinalXOF() API has been left as a one shot
operation. A similar interface is used by another toolkit.
The low level SHA3_Squeeze() function needed to change slightly so
that it can handle multiple squeezes. This involves changing the
assembler code so that it passes a boolean to indicate whether
the Keccak function should be called on entry.
At the provider level, the squeeze is buffered, so that it only requests
a multiple of the blocksize when SHA3_Squeeze() is called. On the first
call the value is zero, on subsequent calls the value passed is 1.
This PR is derived from the excellent work done by @nmathewson in
https://github.com/openssl/openssl/pull/7921
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21511)
In testing the quic demos, I found that the quicserver refused to start for me,
indicating an inability to bind a socket to listen on
The problem turned out to be that getaddrinfo on my system was returning
multiple entries, due to the fact that /etc/host maps the localhost host name to
both ipv4 (127.0.0.1) and ipv6 (::1), but returns the latter as an ipv4 mapped
address (specifying family == AF_INET)
It seems like the proper fix would be to modify the /etc/hosts file to not make
that mapping, and indeed that works. However, since several distribution ship
with this setup, it seems like it is worthwhile to manage it in the server code.
its also that some other application may be bound to a given address/port
leading to failure, which I think could be considered erroneous, as any failure
for the full addrinfo list in quicserver would lead to a complete failure
Fix this by modifying the create_dgram_bio function to count the number of
sockets is successfully binds/listens on, skipping any failures, and only exit
the application if the number of bound sockets is zero.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22559)
We would like to be able to log and audit the symbols we use in openssl
so that we might catch when a new platform symbols is referecned
Add such a script (just on unix platforms for now) that gathers the used
symbols not belonging to libcrypto or libssl, and compare it to a prior
known set of used symbols. Error out if a new symbol is found
Add this script to the ci workflow in CI to capture newly
introduced platform symbols
Fixes#22330
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22478)
Previously we entered an infinite loop if these things failed.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22557)
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22405)
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22247)
Rather than instantiate the private and primary DRBGs during the
selftest, instead use a test RNG. This leaves the DRBG setup
pristine and permits later replacement of the seed source despite
the very early running power up self tests.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21964)
We already have BIO_ADDR_dup() but in some contexts that is not sufficent.
We implement BIO_ADDR_copy() and make BIO_ADDR_dup() use it.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22164)
Add documentation for the function SSL_CONF_CTX_finish() in man3.
Fixes#22084
Signed-off-by: Sumitra Sharma <sumitraartsy@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22128)
Strictly speaking the previous code was still correct since BIO_set_fd
is tolerant of a NULL BIO. But this way is more clear.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21950)
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21958)
Remove some entries which have been documented meanwhile.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21873)
We extend quicserver so that it can handle multiple requests with an
HTTP request on each one. If a uni-directional stream comes in we create
a uni-directional stream for the response
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21765)
Trace output of the communication with the client is dumped to stderr if
the -trace options is supplied
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21800)
This change is for feature request #21679.
Adds a couple of setters to aid with custom CRL validation.
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21737)
Fixes#21623
Also do not build quicserver with no-stdio as it is a test
utility and tests are disabled with no-stdio anyway.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/21677)
This also upgrades flags similarly to the Linux configuration.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20896)
If the request comes in in multiple chunks properly keep tract of where
we are.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21578)
Now the default is linux-generic32, it's not good for loongarch64.
We can also test if the assembler supports vector instructions here and
disable asm if not.
Closes#21340.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21510)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21116)
We save the error state from the thread that encountered
a permanent error condition caused by system or internal
error to the QUIC_CHANNEL.
Then we restore it whenever we are returning to a user
call when protocol is shutdown.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21087)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
This QUIC server utility is intended for test purposes only and is expected
to be replaced in a future version of OpenSSL by s_server. At that point
it will be removed.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21204)
