TLSv1.3 ignores the alert level, so we should suppress sending of
warning only alerts.
Fixes#6211
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6370)
In TLSv1.3 we should ignore the severity level of an alert according to
the spec.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6370)
If the remove_session_cb accesses the session's data (for instance,
via SSL_SESSION_get_protocol_version), a potential use after free
can occur. For this, consider the following scenario when adding
a new session via SSL_CTX_add_session:
- The session cache is full
(SSL_CTX_sess_number(ctx) > SSL_CTX_sess_get_cache_size(ctx))
- Only the session cache has a reference to ctx->session_cache_tail
(that is, ctx->session_cache_tail->references == 1)
Since the cache is full, remove_session_lock is called to remove
ctx->session_cache_tail from the cache. That is, it
SSL_SESSION_free()s the session, which free()s the data. Afterwards,
the free()d session is passed to the remove_session_cb. If the callback
accesses the session's data, we have a use after free.
The free before calling the callback behavior was introduced in
commit e4612d02c5 ("Remove sessions
from external cache, even if internal cache not used.").
CLA: trivial
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6222)
We generate the secrets based on the nonce immediately so there is no
need to keep the nonce.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6415)
All tickets on a connection need to have a unique nonce. When this was
originally implemented we only ever sent one ticket on the conneciton so
this didn't matter. We were just using the value 0. Now we can get multiple
tickets to we need to start doing the ticket nonce properly.
Fixes#6387
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6415)
The TLSv1.3 spec requires us to use the client application traffic secret
during generation of the Finished message following a post handshake
authentication.
Fixes#6263
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/6297)
Because TLS 1.3 sends more non-application data records some clients run
into problems because they don't expect SSL_read() to return and set
SSL_ERROR_WANT_READ after processing it.
This can cause problems for clients that use blocking I/O and use
select() to see if data is available. It can be cleared using
SSL_CTX_clear_mode().
Reviewed-by: Matt Caswell <matt@openssl.org>
GH: #6260
NULL-check for cipher is redundant, instead check if cipher->name is NULL
While here fix formatting of BIO_printf calls as suggested by Andy Polyakov.
CLA: trivial
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6282)
In TLSv1.2 and below we always cache new sessions by default on the server
side in the internal cache (even when we're using session tickets). This is
in order to support resumption from a session id.
In TLSv1.3 there is no session id. It is only possible to resume using the
ticket. Therefore, in the default case, there is no point in caching the
session in the internal store.
There is still a reason to call the external cache new session callback
because applications may be using the callbacks just to know about when
sessions are created (and not necessarily implementing a full cache). If
the application also implements the remove session callback then we are
forced to also store it in the internal cache so that we can create
timeout events. Otherwise the external cache could just fill up
indefinitely.
This mostly addresses the issue described in #5628. That issue also proposes
having an option to not create full stateless tickets when using the
internal cache. That aspect hasn't been addressed yet.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/6293)
Also allows the apps to set it.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5227)
We send a session ticket automatically in TLSv1.3 at the end of the
handshake. This commit provides the ability to set how many tickets should
be sent. By default this is one.
Fixes#4978
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5227)
In DTLS if we have buffered a fragment for a zero length message (e.g.
ServerHelloDone) then, when we unbuffered the fragment, we were attempting
to memcpy the contents of the fragment which is zero length and a NULL
pointer. This is undefined behaviour. We should check first whether we
have a zero length fragment.
Fixes a travis issue.
[extended tests]
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6223)
Don't call the decrypt ticket callback if we've already encountered a
fatal error. Do call it if we have an empty ticket present.
Change the return code to have 5 distinct returns codes and separate it
from the input status value.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6198)
The return value from the ticket_key callback was not properly handled in
TLSv1.3, so that a ticket was *always* renewed even if the callback
requested that it should not be.
Also the ticket decrypt callback was not being called at all in TLSv1.3.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6198)
When a server call SSL_write_early_data() to write to an unauthenticated
client the buffering BIO is still in place, so we should ensure we flush
the write.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6198)
The TLS code marks records as read when its finished using a record. The DTLS code did
not do that. However SSL_has_pending() relies on it. So we should make DTLS consistent.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6159)
If we have no certificate and we are using "old style" PSKs then we will
always default to using SHA-256 for that PSK. However we may have selected
a ciphersuite that is not based on SHA-256. Therefore if we see that there
are no certificates and we have been configured for "old style" PSKs then
we should prefer SHA-256 based ciphersuites during the selection process.
Fixes#6197
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6215)
During a full handshake the server is the last one to "speak". The timer
should continue to run until we know that the client has received our last
flight (e.g. because we receive some application data).
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6170)
The ciphers field in a session contains the stack of ciphers offered by
the client.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6113)
The function SSL_get_shared_ciphers() is supposed to return ciphers shared
by the client and the server. However it only ever returned the client
ciphers.
Fixes#5317
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6113)
Commit d316cdcf6d introduced some extra
checks into the session-cache update procedure, intended to prevent
the caching of sessions whose resumption would lead to a handshake
failure, since if the server is authenticating the client, there needs to
be an application-set "session id context" to match up to the authentication
context. While that change is effective for its stated purpose, there
was also some collatoral damage introduced along with the fix -- clients
that set SSL_VERIFY_PEER are not expected to set an sid_ctx, and so
their usage of session caching was erroneously denied.
Fix the scope of the original commit by limiting it to only acting
when the SSL is a server SSL.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5967)
SSL_kANY, and SSL_aANY were placed in the wrong fields. It makes no
functional difference since these macros evaluate to 0 anyway, which is
the correct value for these fields.
Fixes#6048
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6095)
The MAX_CURVELIST macro defines the total number of in-built SSL/TLS curves
that we support. However it has not been updated as new curves are added.
Fixes#5232
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/6065)
In 1.0.2 and below we always send the same client_version in a reneg
ClientHello that we sent the first time around, regardless of what
version eventually gets negotiated. According to a comment in
statem_clnt.c this is a workaround for some buggy servers that choked if
we changed the version used in the RSA encrypted premaster secret.
In 1.1.0+ this behaviour no longer occurs. This restores the original
behaviour.
Fixes#1651
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6059)
The spec does not prohib certs form using compressed points. It only
requires that points in a key share are uncompressed. It says nothing
about point compression for certs, so we should not fail if a cert uses a
compressed point.
Fixes#5743
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/6055)
This dead code should have been removed as part of #5874 but got missed.
Found by Coverity.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6049)
In 1.0.2 you could configure automatic ecdh params by using the
ECDHParameters config directive and setting it to the value
"+Automatic" or just "Automatic". This is no longer required in 1.1.0+
but we still recognise the "+Automatic" keyword for backwards compatibility.
However we did not recognise just "Automatic" without the leading "+" which
is equally valid. This commit fixes that omission.
Fixes#4113
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6035)
DTLS was not correctly returning the number of pending bytes left in
a call to SSL_pending(). This makes the detection of truncated packets
almost impossible.
Fixes#5478
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6020)
In 1.1.0 and before calling SSL_in_init() from the info_callback
at SSL_CB_HANDSHAKE_DONE would return 0. This commit fixes it so
that it does again for 1.1.1. This broke Node.
Fixes#4574
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6019)
This will be necessary to enable Wireshark to decrypt QUIC 0-RTT data.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5702)
