Mention that supported curves (aka groups) include named EC parameters
as well as X25519 and X448 or FFDHE groups.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24774)
Signed-off-by: fanqiaojun <fanqiaojun@yeah.net>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24128)
TLS record compression is off by default. Even if you switch it on, it
cannot be used at security level 2 which is the default in OpenSSL 3.2 and
above. Update the docs to point this out.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23104)
Also mentions the new FIN command in s_client advance mode
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20580)
Add support for the RFC7250 certificate-type extensions.
Alows the use of only private keys for connection (i.e. certs not needed).
Add APIs
Add unit tests
Add documentation
Add s_client/s_server support
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18185)
3.1 has been decided to be a FIPS 140-3 release, springing from the branch
openssl-3.0, and the master branch to continue with the development of
OpenSSL 3.2.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19350)
Supports Linux, MacOS and FreeBSD
Disabled by default, enabled via `enabled-tfo`
Some tests
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8692)
The option SSL_OP_NO_EXTENDED_MASTER_SECRET was added in #3910.
And it is valid for versions below (D)TLS 1.2.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17597)
From openssl-3.0.0-alpha15, KTLS is turned off by default, even if
KTLS feature in compilation, which makes it difficult to use KTLS
through s_server/s_client, so a parameter option 'ktls' is added
to enable KTLS through cmdline.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16609)
There doesn't appear to be a good reason to omit protocol message tracing by default.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15665)
No longer needed after rewrite of cmd-nits
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15311)
This option is only useful for the client, but it was previously
marked as only being applicable for servers.
Correct the entry to properly mark it as client-only, and update the
s_server/s_client manuals accordingly.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15127)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/13651)
Move detailed doc to specific new files in doc/man1/openssl-*-options.pod
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/13315)
These two functions react when the FORMAT_ENGINE format is given, and
use the passed ENGINE |e| and the passed key argument to form a URI
suitable for the engine: loader.
Co-authored-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/13570)
allows loading password-protected PKCS#12 files in x509, ca, s_client, s_server
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12647)
This change applies the recommendation of the Linux Documentation Project
to the documentation files of OpenSSL. Additionally, util/find-doc-nits
was updated accordingly.
The change follows a suggestion of mspncp on https://github.com/openssl/openssl/pull/12370
and incoporates the requested changes on the pull request
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/12460)
CLA: trivial
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/12320)
Partially fixes#11209.
Before OpenSSL 3.0 in case when peer does not send close_notify,
the behaviour was to set SSL_ERROR_SYSCALL error with errno 0.
This behaviour has changed. The SSL_OP_IGNORE_UNEXPECTED_EOF restores
the old behaviour for compatibility's sake.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11735)
This also adds the more flexible and general load_key_cert_crl()
as well as helper functions get_passwd(), cleanse(), and clear_free()
to be used also in apps/cmp.c etc.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11755)
A little spell checking.
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/11644)
fix doc of s_client and s_server credentials and verification options
fix doc of verification options also for s_time, x509, crl, req, ts, and verify
correcting and extending texts regarding untrusted and trusted certs,
making the order of options in the docs and help texts more consistent,
etc.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11273)
Add a -provider option to allow providers to be loaded. This option can be
specified multiple times.
Add a -provider_path option to allow the path to providers to be specified.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11167)
Update CHANGES to have a complete and uniform description.
Fixes#9730
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/10972)
Move the x509_V_ERR_xxx definitions from openssl-verify to
X509_STORE_CTX_get_error.pod. Add some missing ones. Consistently
start with a lowercase letter, unless it's an acronym.
Fix some markup mistakes in X509_verify_cert.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10132)
Common wording courtesy Richard Levitte.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10128)
Also clarify the description of the options.
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10259)
