HP-UX provides sockets symbols with incompatible prototypes under same
name. This caused problems in 64-bit builds. Additional macros force
unambiguous symbols with unambiguous prototypes.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5742)
picker() is type agnostic, but its output consumer is not. Or rather
it doesn't work if picker() picks nothing when consumer expects
array. So ensure array is returned when array is expected.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5770)
Although it deviates from the actual prototype of DSO_dsobyaddr(), this
is now ISO C compliant and gcc -Wpedantic accepts the code.
Added DATA segment checking to catch ptrgl virtual addresses. Avoid
memleaks with every AIX/dladdr() call. Removed debug-fprintf()s.
Added test case for DSO_dsobyaddr(), which will eventually call dladdr().
Removed unecessary AIX ifdefs again.
The implementation can only lookup function symbols, no data symbols.
Added PIC-flag to aix*-cc build targets.
As AIX is missing a dladdr() implementation it is currently uncertain our
exit()-handlers can still be called when the application exits. After
dlclose() the whole library might have been unloaded already.
Signed-off-by: Matthias Kraft <makr@gmx.eu>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5668)
The Debian build system uses a `debian' target which sets CFLAGS and
then we have for instance debian-amd64 which inherits from
linux-x86_64 and debian [0]. So far so good.
Unless there are different suggestions how to do this, I would keep it.
However since the target name does not start with `linux', the build
system does not enable the afalg engine. So in order to get enabled, I
added a
`enable => [ "afalgeng" ],'
to the generic linux config which sets it explicit (as suggested by
Richard Levitte). Having this set, we can check for it instead matching
the target name.
[0] https://sources.debian.org/src/openssl/1.1.0g-2/Configurations/20-debian.conf/
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5169)
We have '--strict-warnings' for this kind of stuff... also, user
flags are added last, so this overrides any warning supression
--strict-warnings may put in place (for good reasons).
Fixes#5609
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5612)
Move Android targets to separate file, automate sysroot setup and
add support for NDK 16.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5589)
$target{build_scheme} consists of fixed number of elements with 3rd
element denoting VC install-path "flavour", i.e. where to install things.
Instead of looking at 3rd, let's look at last. This allows to override
flavour from template in a simple way.
Configurations/10-main.conf: define generic "flavour" in VC-common
template. Since VC-W32 was the only recognized "flavour", remove
"flavour" definitions from all targets/templates, but VC-WIN32. And
rename VC-W32 to VC-WOW.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5502)
We're currently using the attributes 'defines', 'cppflags', 'cflags'
etc quite liberally, with no regard for where that ends up. Quite a
few of those flags are actually only relevant for the libraries
(mostly libcrypto), so it's safe to say that those could be applied to
the libraries only.
So, we move some of those flags to 'lib_defines', 'lib_cppflags',
'lib_cflags', etc.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5560)
With the support of "make variables" comes the possibility for the
user to override them. However, we need to make a difference between
defaults that we use (and that should be overridable by the user) and
flags that are crucial for building OpenSSL (should not be
overridable).
Typically, overridable flags are those setting optimization levels,
warnings levels, that kind of thing, while non-overridable flags are,
for example, macros that indicate aspects of how the config target
should be treated, such as L_ENDIAN and B_ENDIAN.
We do that differentiation by allowing upper case attributes in the
config targets, named exactly like the "make variables" we support,
and reserving the lower case attributes for non-overridable project
flags.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5534)
-fno-common was removed for all Darwin targets in
0c8734198d with rationale "it's either
'ranlib -c' or '-fno-common'." However, it's still absolutely required
in 32-bit darwin-ppc-cc. And when trying things out I didn't quite
see why it was formulated as one-or-another choice, as 'ranlib -c'
shouldn't [and doesn't] have problems with object modules without
commons. [Well, to be frank, I didn't manage to reproduce the problem
the modification was meaning to resolve either...]
Reviewed-by: Rich Salz <rsalz@openssl.org>
In previous OpenSSL versions, this letter was part of the make
variable AR. However, following the usual convention (read: GNU),
this letter is supposed to be part of ARFLAGS.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5386)
Avoid using crypto/modes/ghash-ia64.s, as it uses features that are
explicitely prohibited on VMS.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5357)
Instead of having the knowledge of the exact flags to run the C
preprocessor only and have it output on standard output in the deeper
recesses of the build file template, make it a config parameter, or
rely on build CPP in value ('$(CC) -E' on Unix).
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/5356)
All VMS config targets were literally copies of each other, only
differing in what argument the parameter seeking function vms_info()
received (the pointer size).
This could be hugely simplified by letting vms_info() detect what
pointer size was desired from the desired config target name instead.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5364)
It was a bit absurd to have this being specially handled in the build
file templates, especially that we have the 'includes' attribute.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5296)
Most modules are direct implementations of openssl application
sub-commands, but some constitute a support library, which can be used
by more than one program (and is, incidently, by test/uitest).
For practical purposes, we place the support library modules in a
private, static library.
Finally, there are some modules that don't have direct references in
the rest of the apps code, but are still crucial. See them as some
kind of extra crt0 or similar for your platform.
Inspiration from David von Oheimb
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5222)
C++ flags got the same config target value as C flags, but then
nothing else happened while C flags get all kinds of stuff added to
them (especially when --strict-warnings is used).
Now, C++ flags get the exact same treatment as C flags. However, this
only happens when a C++ compiler is specified, to avoid confusing
messages about added C++ flags.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5181)
vc_wince_info()->{defines} was left around, when it should be
vc_wince_info()->{cppflags}
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5182)
There were a small number that inherited no BASE, the now inherit
BASE_unix.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5177)
Support the following "make variables":
AR (GNU compatible)
ARFLAGS (GNU Compatible)
AS (GNU Compatible)
ASFLAGS (GNU Compatible)
CC (GNU Compatible)
CFLAGS (GNU Compatible)
CXX (GNU Compatible)
CXXFLAGS (GNU Compatible)
CPP (GNU Compatible)
CPPFLAGS (GNU Compatible)
CPPDEFINES List of CPP macro definitions. Alternative for -D
CPPINCLUDES List of CPP inclusion directories. Alternative for -I
HASHBANGPERL Perl invocation to be inserted after '#!' in public
perl scripts.
LDFLAGS (GNU Compatible)
LDLIBS (GNU Compatible)
RANLIB Program to generate library archive index
RC Program to manipulate Windows resources
RCFLAGS Flags for $(RC)
RM (GNU Compatible)
Setting one of these overrides the corresponding data from our config
targets. However, flags given directly on the configuration command
line are additional, and are therefore added to the flags coming from
one of the variables above or the config target.
Fixes#2420
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5177)
C preprocessor flags get separated from C flags, which has the
advantage that we don't get loads of macro definitions and inclusion
directory specs when linking shared libraries, DSOs and programs.
This is a step to add support for "make variables" when configuring.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5177)
Even -pthread gets treated that way. The reason to do this is so it
ends up in 'Libs.private' in libcrypto.pc.
Fixes#3884
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5134)
So far, we've placed all extra library related flags together, ending
up in the make variable EX_LIBS. This turns out to be problematic, as
for example, some compilers don't quite agree with something like
this:
cc -o foo foo.o -L/whatever -lsomething
They prefer this:
cc -L/whatever -o foo foo.o -lsomething
IBM's compiler on OS/390 is such a compiler that we know of, and we
have previously handled that as a previous case.
The answer here is to make a more general solution, where linking
options are divided in two parts, where one ends up in LDFLAGS and
the other in EX_LIBS (they corresponds to what is called LDFLAGS and
LDLIBS in the GNU world)
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5033)
The uClinux targets included some attributes that would result in
circular references of CFLAGS and LDCLAGS.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5034)
Remove some config attributes that just duplicate values that are
already there in other attributes.
Remove the special runs of mkdef.pl and mkrc.pl from build file
templates, as these are now done via GENERATE statements in
build.info.
Remove all references to ordinal files from build file templates, as
these are now treated via the GENERATE statements in build.info.
Also remove -shared flags and similar that are there in shared-info.pl
anyway. (in the case of darwin, it's mandatory, as -bundle and
-dynamiclib don't mix)
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4840)
It will return the last expression from the input file.
We also use this in read_config, which slightly changes what's
expected of Configurations/*.conf. They do not have to assign
%targets specifically. On the other hand, the table of configs MUST
be the last expression in each of those files.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4840)
This way, any of the relevant environment variables for the platform
being configured are preserved and don't have to be recalled manually
when reconfiguring.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4818)
We had /WX (treat warnings as errors) in VC-WIN32 for long time. At
some point it was somehow omitted. It's argued that it allows to
keep better focus on new code, which motivates the comeback...
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4721)
Names were not removed.
Some comments were updated.
Replace Andy's address with openssl.org
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4516)
Detect clang even if it's disguised, e.g. cross-compiler or invoked by
explicit path name, and add the option based on that.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4383)
$(SHLIB_MAJOR).$(SHLIB_MINOR) is really a synonym for
$(SHLIB_VERSION_NUMBER), and is therefore an added complexity,
so better to use $(SHLIB_VERSION_NUMBER) directly. SHLIB_MAJOR and
SHLIB_MINOR are now unused, but are kept around purely as information
in case someone relies on their existence.
At the same time, add support for custom shared library extensions
with the three new Makefile variables SHLIB_EXT, SHLIB_EXT_SIMPLE and
SHLIB_EXT_IMPORT. By default, they hold the variants of shared
library extensions we support. On mingw and cygwin, SHLIB_EXT_IMPORT
is defined; on all other Unix platforms, it's empty.
An example to get shared libraries with a slightly different SOVER name:
$ make SHLIB_EXT='.$(SHLIB_VERSION_NUMBER).so'
Fixes#3902
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3964)
When building object files for libraries, information whether the
library would be installed or not wasn't passed down to the object
file building rules.
Also, make it so settings like |no_inst_lib_cflags| can be the empty
string.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3247)
It turns out that /DSF didn't do any good for our purposes. Instead,
remove the CALL_DEBUG flag from any image we link. This ensures that
we can have debugging information in the image files, but don't
automatically end up in a debugging session upon image activation.
Unfortunately, this means the CALL_DEBUG must be turned on when there
is a need to run with the debugger activated, and to turn it off when
done. This has been documented in NOTES.VMS.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2957)
That makes it possible to run images without automagically ending up
in a debug session, while still being able to debug when required.
All .DSF files must reside in the same directory to be useful.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2947)
'linux-x86' is similar to 'linux-x86_64' but uses -m32 rather than -m64.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1924)
If zlib-dynamic was given but not --with-zlib-lib, LIBZ was defined to
the empty string. Instead, give it the default "ZLIB1".
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1772)
VMS only unloads shared libraries at process rundown, so tell the
OpenSSL code so by pretending we linked with -znodelete.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1862)
gcc is kinder, it silently passes quite a few flags to ld, while clang
is stricter and wants them prefixed with -Wl,
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1836)
Instead of deliberately leaking a reference to ourselves, use nodelete
which does this more neatly. Only for Linux at the moment.
Reviewed-by: Tim Hudson <tjh@openssl.org>
VC-noCE-common and VC-WIN64-common were missing this line:
template => 1,
Fixes GH#1809
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1811)
The current version of the VMS compiler provides C99 features,
strictly language wise. Unfortunately, even the most recent standard
library isn't fully updated for that standard, so we need to use an
earlier standard that the compiler supports.
Most importantly, this affects the __STDC_VERSION__ value, which the
compiler unfortunately currently defaults to 199901L. With this
change we won't have to give VMS special treatment when looking for
features based on that macro.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1785)
This is an amendment to the september 8 commit titled "VMS: Don't
force symbol mixed case when building DSOs"
Reviewed-by: Rich Salz <rsalz@openssl.org>
This flag got moved after -xarch=v9 in 1.1.0 and had the unexpected
side effect of the compiler building for 32-bit v8plusa instead of v9.
GH#1521
CLA: none; trivial
Signed-off-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
This is generalised by having the following macros for stuff that won't
be installed:
NO_INST_LIB_CFLAGS, used instead of LIB_CFLAGS
NO_INST_DSO_CFLAGS, used instead of DSO_CFLAGS
NO_INST_BIN_CFLAGS, used instead of BIN_CFLAGS
They take values from corresponding target config fields if those are
defined, otherwise they take the respective values from LIB_CFLAGS,
DSO_CFLAGS and BIN_CFLAGS.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Improve interchangeability of aix*-gcc targets by linking shared
libraries with -static-libgcc, and address linking problems with
vendor compiler.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Since vendor assembler can't assemble our modules with -KPIC flag,
it, assembly support, was not available as an option. But this
means lack of side-channel resistant code, which is incompatible
with security by todays standards.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Because some targets execute perl code that might die, we risk
incomplete lists. Make it so dying doesn't happen when we're listing
targets.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Most of the time, this isn't strictly needed. However, in the default
extern model (called relaxed refdef), symbols are treated as weak
common objects unless they are initialised. The librarian doesn't
include weak symbols in the (static) libraries, which renders them
invisible when linking a program with said those libraries, which is a
problem at times.
Using the strict refdef model is much more like standard C on all
other platforms, and thereby avoid the issues that come with the
relaxed refdef model.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The options RC4_CHUNK_LL, DES_PTR, and BF_PTR were removed by Rich
in commit 3e9e810f2e but were still
sticking around in a coupule configuration entries.
Since they're unused, remove them.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1390)
Windows never composes UTF-8 strings as result of user interaction
such as passing command-line argument. The only way to compose one
is programmatic conversion from WCHAR string, which in turn can be
picked up on command line.
[For reference, why not wmain, it's not an option on MinGW.]
Reviewed-by: Richard Levitte <levitte@openssl.org>
DJGPP is a 3rd party configuration, we rely entirely on the OpenSSL to
help us fine tune and test. Therefore, it's moved to its own config.
Reviewed-by: Andy Polyakov <appro@openssl.org>
When compiling all other C files, rely on the compiler to
automatically pick up the name translation information from the header
files __DECC_INCLUDE_{PRO,EPI}LOGUE.H.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This also restores the possibility to have ml used with VC-WIN32 with
no-asm, which was lost during the mk1mf -> unified transition.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Instead of absolute hard coding of the libz library name, have it use
the macro LIBZ, which is set to defaults we know in case it's
undefined.
This allows our configuration to set something that's sane on current
or older platforms, and allows the user to override it by defining
LIBZ themselves.
Reviewed-by: Matt Caswell <matt@openssl.org>
The macros ZLIB and ZLIB_SHARED weren't appropriately defined,
deviating wrongly from how they worked in earlier OpenSSL versions.
So, restore it so that ZLIB is defined if configured "enable-zlib" and
so that ZLIB and ZLIB_SHARED are defined if configured
"enable-zlib-dynamic".
Additionally, correct the interpretation of the --with-zlib-lib value
on Windows and VMS, where it's used to indicate the actual zlib
zlib library file / logical name, as that can differ depending on zlib
version and packaging on those platforms.
Finally for Windows and VMS, we also define the macro LIBZ with that
file name / logical name when configured "zlib-dynamic", so the
compression unit can pick it up and use it.
Reviewed-by: Matt Caswell <matt@openssl.org>
Since NDEBUG is defined unconditionally on command line for release
builds, we can omit *_DEBUG options in favour of effective "all-on"
in debug builds exercised though CI.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reverts commit 087ca80ad8
Instead of battling the odd format of argv given to main() in default
P64 mode, tell the compiler to make it an array of 64-bit pointers
when compiling in P64 mode.
A note is added in NOTES.VMS regarding minimum DEC C version.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The warning MAYLOSEDATA3 is one you will always get when compiling
source that calculates the difference between two pointers with
/POINTER_SIZE=64.
The reason is quite simple, ptrdiff_t is always a 32-bit integer
regardless of pointer size, so the result of 'ptr1 - ptr2' can
potentially be larger than a 32-bit integer. The compiler simply
warns you of that possibility.
However, we only use pointer difference within objects and strings,
all of them well within 2^32 bytes in size, so that operation is
harmless with our source, and we can therefore safely turn off that
warning.
Reviewed-by: Rich Salz <rsalz@openssl.org>
On VMS, we downcase option names, which means that config names are
downcased as well, so they need to be downcased in the target table to
be found.
Reviewed-by: Rich Salz <rsalz@openssl.org>
utils/mkrc.pl was added a while ago as a better generator for the
Windows DLL resource file. Finalize the change by removing the
ms/version32.rc generator from Configure and adding resource file
support using mkrc.pl in Configurations/windows-makefile.pl
Reviewed-by: Andy Polyakov <appro@openssl.org>
This introduces the settings loutflag and aroutflag, because different
Windows tools that do the same thing have different ways to specify
the output file.
The Borland C++ config is commented away for the monent, perhaps
permanently.
Reviewed-by: Rich Salz <rsalz@openssl.org>
When object files with common block symbols are added to static
libraries on Darwin, those symbols are invisible to the linker that
tries to use them. Our solution was to use -fno-common when compiling
C source.
Unfortunately, there is assembler code that defines OPENSSL_ia32cap_P
as a common block symbol, unconditionally, and in some cases, there is
no other definition. -fno-common doesn't help in this case.
However, 'ranlib -c' adds common block symbols to the index of the
static library, which makes them visible to the linker using it, and
that solves the problem we've seen.
The common conclusion is, either use -fno-common or ranlib -c on
Darwin. Since we have common block symbols unconditionally, choosing
the method for our source is easy.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
The thread_cflag setting filled a double role, as kinda sorta an
indicator of thread scheme, and as cflags. Some configs also added
lflags and ex_libs for multithreading regardless of if threading would
be enabled or not.
Instead of this, add threading cflags among in the cflag setting,
threading lflags in the lflag setting and so on if and only if threads
are enabled (which they are by default).
Also, for configs where there are no special cflags for threading (the
VMS configs are of that kind), this makes it possible to still clearly
mention what thread scheme is used.
The exact value of thread scheme is currently ignored except when it's
"(unknown)", and thereby only serves as a flag to tell if we know how
to build for multi-threading in a particular config. Yet, the
currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a
solaris threads) and "winthreads".
Reviewed-by: Andy Polyakov <appro@openssl.org>
Instead, make the build type ("debug" or "release") available through
$config{build_type} and let the configs themselves figure out what the
usual settings (such as "cflags", "lflags" and so on) should be
accordingly.
The benefit with this is that we can now have debug and release
variants of any setting, not just those Configure supports, and may
also involve other factors (the MSVC flags /MD[d] and /MT[d] involve
both build type and whether threading is enabled or not)
Reviewed-by: Andy Polyakov <appro@openssl.org>
Configure had the Unix centric addition of -lz when linking with zlib
is enabled, which doesn't work on other platforms. Therefore, we move
it to the BASE_unix config template and add corresponding ones in the
other BASE_* config templates. The Windows one is probably incomplete,
but that doesn't matter for the moment, as mk1mf does it's own thing
anyway.
This required making the %withargs table global, so perl snippets in
the configs can use it.
Reviewed-by: Andy Polyakov <appro@openssl.org>
These BASE templates are intended to hold values that are common for
all configuration variants for whole families of configurations.
So far, three "families" are identified: Unix, Windows and VMS, mostly
characterised by the build system they currently use.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This has no real meaning, except it gives Configure a hint that VC
targets are indeed capable of producing shared objects.
Reviewed-by: Matt Caswell <matt@openssl.org>
They now default to " " as separator, but that can be overridden by
having a hash with parameters as last argument. The only currently
recognised parameter is `separator'.
The special separator `undef' will force the result to become a list
rather than a concatenated string.
Reviewed-by: Andy Polyakov <appro@openssl.org>
These flags are limitting needlessly, are often patched by packagers,
and should be specified on the configuration command line by anyone
who desires for it to be specific rather than forced by us.
This work was already done with mingw when those configs were worked
on, now it gets applied to the remaining configs.
Reviewed-by: Andy Polyakov <appro@openssl.org>
So far, MingW shared libraries were named like this
libeay32.dll + libeay32.dll.a
ssleay32.dll + ssleay32.dll.a
That naming scheme is antiquated, a reminicense of SSLeay. We're
therefore changing the scheme to something that's more like the rest
of OpenSSL.
There are two factors to remember:
- Windows libraries have no recorded SOvers, which means that the
shared library version must be encoded in the name. According to
some, it's unwise to encode extra periods in a Windows file name,
so we convert version number periods to underscores.
- MingW has multilib ability. However, DLLs need to reside with the
binaries that use them, so to allow both 32-bit and 64-bit DLLs to
reside in the same place, we add '-x64' in the name of the 64-bit
ones.
The resulting name scheme (for SOver 1.1) is this:
on x86:
libcrypto-1_1.dll + libcrypto.dll.a
libssl-1_1.dll + libssl.dll.a
on x86_64:
libcrypto-1_1-x64.dll + libcrypto.dll.a
libssl-1_1-x64.dll + libssl.dll.a
An observation is that the import lib is the same for both
architectures. Not to worry, though, as they will be installed in
PREFIX/lib/ for x86 and PREFIX/lib64/ for x86_64.
As a side effect, MingW got its own targets in Makefile.shared.
link_dso.mingw-shared and link_app.mingw-shared are aliases for the
corresponding cygwin-shared targets. link_shlib.mingw-shared is,
however, a target separated from the cygwin one.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Adding uplink and applink to some builds was done by "magic", the
configuration for "mingw" only had a macro definition, the Configure
would react to its presence by adding the uplink source files to
cpuid_asm_src, and crypto/build.info inherited dance to get it
compiled, and Makefile.shared made sure applink.o would be
appropriately linked in. That was a lot under the hood.
To replace this, we create a few template configurations in
Configurations/00-base-templates.conf, inherit one of them in the
"mingw" configuration, the rest is just about refering to the
$target{apps_aux_src} / $target{apps_obj} in the right places.
Reviewed-by: Andy Polyakov <appro@openssl.org>
As part of this, change util/mkdef.pl to stop adding libraries to
depend on in its output. mkdef.pl should ONLY output a symbol
vector.
Because symbol names can't be longer than 31 characters, we use the
compiler to shorten those that are longer down to 23 characters plus
an 8 character CRC. To make sure users of our header files will pick
up on that automatically, add the DEC C supported extra headers files
__decc_include_prologue.h and __decc_include_epilogue.h.
Furthermore, we add a config.com, so VMS people can configure just as
comfortably as any Unix folks, thusly:
@config
Reviewed-by: Rich Salz <rsalz@openssl.org>
Cygwin and Mingw name their libraries a bit differently from the rest
of the POSIXly universe, we need to adapt to that.
In Makefile.tmpl, it means that some hunks will only be output
conditionally.
This also means that shared_extension for the Cygwin and Mingw
configurations in Configurations/10-main.conf are changing from .dll.a
to .dll. Makefile.shared does a fine job without having them
specified, and it's much easier to work with tucking an extra .a at
the end of files in the installation recipes than any amount of name
rewrites, especially with the support of the SHARED_NAME in the top
build.info.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Some time ago, we had a ex_libs configuration setting that could be
divided into lflags and ex_libs. These got divided in two settings,
lflags and ex_libs, and the former was interpreted to be general
linking flags.
Unfortunately, that conclusion wasn't entirely accurate. Most of
those linking were meant to end up in a very precise position on the
linking command line, just before the spec of libraries the linking
depends on.
Back to the drawing board, we're diving things further, now having
lflags, which are linking flags that aren't depending on command line
position, plib_lflags, which are linking flags that should show up just
before the spec of libraries to depend on, and finally ex_libs, which
is the spec of extra libraries to depend on.
Also, documentation is changed in Configurations/README. This was
previously forgotten.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
The lflags configuration had a weird syntax with a % as separator. If
it was present, whatever came before ended up as PEX_LIBS in Makefile
(usually, this is LDFLAGS), while whatever came after ended up as
EX_LIBS.
This change splits that item into lflags and ex_libs, making their use
more explicit.
Also, PEX_LIBS in all the Makefiles are renamed to LDFLAGS.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Many options for supporting optimizations for legacy crypto on legacy
platforms have been removed. This simplifies the source code and
does not really penalize anyone.
DES_PTR (always on)
DES_RISC1, DES_RISC2 (always off)
DES_INT (always 'unsigned int')
DES_UNROLL (always on)
BF_PTR (always on) BF_PTR2 (removed)
MD2_CHAR, MD2_LONG (always 'unsigned char')
IDEA_SHORT, IDEA_LONG (always 'unsigned int')
RC2_SHORT, RC2_LONG (always 'unsigned int')
RC4_LONG (only int and char (for assembler) are supported)
RC4_CHUNK (always long), RC_CHUNK_LL (removed)
RC4_INDEX (always on)
And also make D_ENCRYPT macro more clear (@appro)
This is done in consultation with Andy.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Time to get rid of @MK1MF_Builds and introduce a more flexible
'build_scheme' configuration key. Its value may be a string or an
array of strings, meaning we need to teach resolve_config how to
handle ARRAY referenses.
The build scheme is a word that selects a function to create the
appropriate result files for a certain configuration. Currently valid
build schemes aer "mk1mf" and "unixmake", the plan is however to add
at least one other for a more universal build scheme.
Incidently, this also adds the functions 'add' and 'add_before', which
can be used in a configuration, so instead of having to repeatedly
write a sub like this:
key1 => sub { join(" ", @_, "myvalues"); },
key2 => sub { join(" ", "myvalues", @_); },
one could write this:
key1 => add(" ", "myvalues"),
key2 => add_before(" ", "myvalues"),
The good point with 'add' and 'add_before' is that they handle
inheritances where the values are a misture of scalars and ARRAYs. If
there are any ARRAY to be found, the resulting value will be an ARRAY,
otherwise it will be a scalar with all the incoming valued joined
together with the separator given as first argument to add/add_before.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Cygwin was used for x86 before, so let's keep it around for those who
still use it (it make Configure reconf possible).
Cygwin-i[3456]86 for those that might generate and pass a target name
directly to Configure.
Reviewed-by: Rich Salz <rsalz@openssl.org>
