Reviewed-by: Neil Horman <nhorman@openssl.org>
Release: yes
(cherry picked from commit 0ce7d1f355)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24034)
Most of the callers do not actually check for
the special -1 return condition because they do not
pass NULL to it. It is also extremely improbable that
any code depends on this -1 return value in this condition
so it can be safely changed to 0 return.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/22930)
More specifically, don't sort the stack when searching when it isn't sorted.
This avoids a race condition.
Fixes#20135
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20782)
This partially reverts commit 30eba7f359.
This is legitimate use of the stack functions and no error
should be reported apart from the NULL return value.
Fixes#19389
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19400)
Since OPENSSL_malloc() and friends report ERR_R_MALLOC_FAILURE, and
at least handle the file name and line number they are called from,
there's no need to report ERR_R_MALLOC_FAILURE where they are called
directly, or when SSLfatal() and RLAYERfatal() is used, the reason
`ERR_R_MALLOC_FAILURE` is changed to `ERR_R_CRYPTO_LIB`.
There were a number of places where `ERR_R_MALLOC_FAILURE` was reported
even though it was a function from a different sub-system that was
called. Those places are changed to report ERR_R_{lib}_LIB, where
{lib} is the name of that sub-system.
Some of them are tricky to get right, as we have a lot of functions
that belong in the ASN1 sub-system, and all the `sk_` calls or from
the CRYPTO sub-system.
Some extra adaptation was necessary where there were custom OPENSSL_malloc()
wrappers, and some bugs are fixed alongside these changes.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19301)
Doing so, had to fix sloppiness in using the stack API in crypto/conf/conf_def.c,
ssl/ssl_ciph.c, ssl/statem/statem_srvr.c, and mostly in test/helpers/ssltestlib.c.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18918)
It is possible for the stack of X509_OBJECTs held in an X509_STORE_CTX to
have a custom compare function associated with it. Normally (by default)
this uses X509_NAME_cmp(). The X509_STORE_CTX_get1_issuer() function
assumed that it would always be X509_NAME_cmp().
By implementing OPENSSL_sk_find_all() function we can avoid explicitly
using X509_NAME_cmp() in X509_STORE_CTX_get1_issuer().
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14728)
This includes error reporting for libcrypto sub-libraries in surprising
places.
This was done using util/err-to-raise
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13318)
We put almost everything in these internal static libraries:
libcommon Block building code that can be used by all
our implementations, legacy and non-legacy
alike.
libimplementations All non-legacy algorithm implementations and
only them. All the code that ends up here is
agnostic to the definitions of FIPS_MODE.
liblegacy All legacy implementations.
libnonfips Support code for the algorithm implementations.
Built with FIPS_MODE undefined. Any code that
checks that FIPS_MODE isn't defined must end
up in this library.
libfips Support code for the algorithm implementations.
Built with FIPS_MODE defined. Any code that
checks that FIPS_MODE is defined must end up
in this library.
The FIPS provider module is built from providers/fips/*.c and linked
with libimplementations, libcommon and libfips.
The Legacy provider module is built from providers/legacy/*.c and
linked with liblegacy, libcommon and libcrypto.
If module building is disabled, the object files from liblegacy and
libcommon are added to libcrypto and the Legacy provider becomes a
built-in provider.
The Default provider module is built-in, so it ends up being linked
with libimplementations, libcommon and libnonfips. For libcrypto in
form of static library, the object files from those other libraries
are simply being added to libcrypto.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10088)
OBJ_bsearch_ and OBJ_bsearch_ex_ are generic functions that don't
really belong with the OBJ API, but should rather be generic utility
functions. The ending underscore indicates that they are considered
internal, even though they are declared publicly.
Since crypto/stack/stack.c uses OBJ_bsearch_ex_, the stack API ends up
depending on the OBJ API, which is unnecessary, and carries along
other dependencies.
Therefor, a generic internal function is created, ossl_bsearch().
This removes the unecessary dependencies.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8899)
This reverts commit 8839324450.
Removing these checks changes the behaviour of the API which is not
appropriate for a minor release. This also fixes a failure in the
fuzz tests when building with no-comp.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6895)
Checks are left in OPENSSL_sk_shift, OPENSSL_sk_pop and OPENSSL_sk_num.
This is because these are used as "opportunistic" readers, pulling
whatever datai, if any, set by somebody else. All calls that add data
don't check for stack being NULL, because caller should have checked
if stack was actually created.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6860)
This is a combination of sk_new and sk_reserve, to make it more
convenient to allocate a new stack with reserved memory and comaprison
function (if any).
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4559)
insert() or an explicit call to OPENSSL_sk_reserve
Factorise STACK item deletion code
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4379)
This allows the caller to guarantee that there is sufficient space for a
number of insertions without reallocation.
The expansion ratio when reallocating the array is reduced to 1.5 rather than 2.
Change bounds testing to use a single size rather than both INT_MAX and
SIZE_MAX. This simplifies some of the tests.
Switch the stack pointers to data from char * to void *
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4386)
If OPENSSL_sk_insert() calls OPENSSL_realloc() and it fails, it was leaking
the originally allocated memory.
Reviewed-by: Rich Salz <rsalz@openssl.org>
We were casting num_alloc to size_t in lots of places, or just using it in
a context where size_t makes more sense - so convert it. This simplifies
the code a bit.
Also tweak the style in stack.c a bit following on from the previous
commit
Reviewed-by: Rich Salz <rsalz@openssl.org>
Rename sk_xxx to OPENSSL_sk_xxx and _STACK to OPENSSL_STACK
Rename lh_xxx API to OPENSSL_LH_xxx and LHASH_NODE to OPENSSL_LH_NODE
Make lhash stuff opaque.
Use typedefs for function pointers; makes the code simpler.
Remove CHECKED_xxx macros.
Add documentation; remove old X509-oriented doc.
Add API-compat names for entire old API
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
The Unix build was the last to retain the classic build scheme. The
new unified scheme has matured enough, even though some details may
need polishing.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This takes us away from the idea that we know exactly how our static
libraries are going to get used. Instead, we make them available to
build shareable things with, be it other shared libraries or DSOs.
On the other hand, we also have greater control of when the shared
library cflags. They will never be used with object files meant got
binaries, such as apps/openssl or test/test*.
With unified, we take this a bit further and prepare for having to
deal with extra cflags specifically to be used with DSOs (dynamic
engines), libraries and binaries (applications).
Reviewed-by: Rich Salz <rsalz@openssl.org>
All those flags existed because we had all the dependencies versioned
in the repository, and wanted to have it be consistent, no matter what
the local configuration was. Now that the dependencies are gone from
the versioned Makefile.ins, it makes much more sense to use the exact
same flags as when compiling the object files.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Now that we have the foundation for the "unified" build scheme in
place, we add build.info files. They have been generated from the
Makefiles in the same directories. Things that are platform specific
will appear in later commits.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This was done by the following
find . -name '*.[ch]' | /tmp/pl
where /tmp/pl is the following three-line script:
print unless $. == 1 && m@/\* .*\.[ch] \*/@;
close ARGV if eof; # Close file to reset $.
And then some hand-editing of other files.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Remove lint, tags, dclean, tests.
This is prep for a new makedepend scheme.
This is temporary pending unified makefile, and might help it.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Create Makefile's from Makefile.in
Rename Makefile.org to Makefile.in
Rename Makefiles to Makefile.in
Address review feedback from Viktor and Richard
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
