INSTALL_PREFIX is a confusing name, as there's also --prefix.
Instead, tag along with the rest of the open source world and adopt
the Makefile variable DESTDIR to designate the desired staging
directory.
The Configure option --install_prefix is removed, the only way to
designate a staging directory is with the Makefile variable (this is
also implemented for VMS' descrip.mms et al).
Reviewed-by: Rich Salz <rsalz@openssl.org>
If init failed we'd like to set an error code to indicate that. But if
init failed then when the error system tries to load its strings its going
to fail again. We could get into an infinite loop. Therefore we just set
a single error the first time around. After that no error is set.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The new init functions can fail if the library has already been stopped. We
should be able to indicate failure with a 0 return value.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add no-async option to Configure that forces ASYNC_NULL.
Related to RT1979
An embedded system or replacement C library (e.g. musl or uClibc)
may not support the *context APIs that are needed for async operation.
Compiles with musl. Ran unit tests, async tests skipped as expected.
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Now that we have the foundation for the "unified" build scheme in
place, we add build.info files. They have been generated from the
Makefiles in the same directories. Things that are platform specific
will appear in later commits.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This was done by the following
find . -name '*.[ch]' | /tmp/pl
where /tmp/pl is the following three-line script:
print unless $. == 1 && m@/\* .*\.[ch] \*/@;
close ARGV if eof; # Close file to reset $.
And then some hand-editing of other files.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Remove lint, tags, dclean, tests.
This is prep for a new makedepend scheme.
This is temporary pending unified makefile, and might help it.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Create Makefile's from Makefile.in
Rename Makefile.org to Makefile.in
Rename Makefiles to Makefile.in
Address review feedback from Viktor and Richard
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Applications wishing to include their own stacks now just need to include
DEFINE_STACK_OF(foo)
in a header file.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Solaris builds were failing during async compilation because the .o files
created from compiling the corresponding .c files held in async/arch were
ending up in the top level async directory. Consequently the link fails
because it can't find the .o files.
Thanks to Richard Levitte for pointing me in the right direction on this.
Reviewed-by: Richard Levitte <levitte@openssl.org>
In the async code for MacOS/X define _XOPEN_SOURCE (if not already
defined) as early as possible. We must do this before including
any header files, because on MacOS/X <stlib.h> includes <signal.h>
which includes <ucontext.h>. If we delay defining _XOPEN_SOURCE
and include <ucontext.h> after various system headers are included,
we are very likely to end up with the wrong (truncated) definition
of ucontext_t.
Also, better error handling and some code cleanup in POSIX fibre
construction and destruction. We make sure that async_fibre_makecontext()
always initializes the fibre to a state that can be freed.
For all implementations, check for error returns from
async_fibre_makecontext().
Reviewed-by: Matt Caswell <matt@openssl.org>
Implements Thread Local Storage in the windows async port. This also has
some knock on effects to the posix and null implementations.
Reviewed-by: Rich Salz <rsalz@openssl.org>
In theory the pthreads approach for Thread Local Storage should be more
portable.
This also changes some APIs in order to accommodate this change. In
particular ASYNC_init_pool is renamed ASYNC_init_thread and
ASYNC_free_pool is renamed ASYNC_cleanup_thread. Also introduced ASYNC_init
and ASYNC_cleanup.
Reviewed-by: Rich Salz <rsalz@openssl.org>
A lot of the pool handling code was in the arch specific files, but was
actually boiler plate and the same across the implementations. This commit
moves as much code as possible out of the arch specific files.
Reviewed-by: Rich Salz <rsalz@openssl.org>
We were using _pipe to create a pipe on windows. This uses the "int" type
for its file descriptor for compatibility. However most windows functions
expect to use a "HANDLE". Probably we could get away with just casting but
it seems more robust to use the proper type and main stream windows
functions.
Reviewed-by: Rich Salz <rsalz@openssl.org>
There are potential deadlock situations that can occur if code executing
within the context of a job aquires a lock, and then pauses the job. This
adds an ability to temporarily block pauses from occuring whilst performing
work and holding a lock.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Even with _XOPEN_SOURCE defined OS-X still displays warnings that
makecontext and friends are deprecated. This isn't a problem until you
try and build with --strict-warnings, and the build fails. This change
suppresses the warnings. We know they are deprecated but there is no
alternative!
Reviewed-by: Rich Salz <rsalz@openssl.org>
async_fibre_makecontext was initialise the fibre first and then calling
getcontext(). It should be the other way around because the getcontext
call may overwrite some of the things we just initialised. This didn't
cause an issue on Linux and so the problem went unnoticed. On OS-X it
causes a crash.
Reviewed-by: Rich Salz <rsalz@openssl.org>
_longjmp/_setjmp do not manipulate the signal mask whilst
longjmp/setjmp may do. Online sources suggest this could result
in a significant speed up in the context switching.
Reviewed-by: Rich Salz <rsalz@openssl.org>
If config'd without -d (--debug), asynctest was crashing with:
*** longjmp causes uninitialized stack frame ***
This is because gcc will add certain checks for some functions
(including longjmp). The checks assume you can only longjmp down the
stack not up. However, if we are actually jumping to a different
fibre then it can appear as if we are going up the stack when we are
not really. This change disables the check.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add some clarifications to the async documentation. Also changed
ASYNC_pause_job() so that it returns success if you are not within the
context of a job. This is so that engines can be used either asynchronously
or synchronously and can treat an error from ASYNC_pause_job() as a real
error.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Don't recreate a new ASYNC_CTX every time we call ASYNC_start_job() - the
same one can be used for the life of the thread. Instead we only free it
up when we call ASYNC_free_pool().
Reviewed-by: Rich Salz <rsalz@openssl.org>
The ASYNC null implementation has not kept pace with the rest of the async
development and so was failing to compile.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Initial API implemented for notifying applications that an ASYNC_JOB
has completed. Currently only s_server is using this. The Dummy Async
engine "cheats" in that it notifies that it has completed *before* it
pauses the job. A normal async engine would not do that.
Only the posix version of this has been implemented so far, so it will
probably fail to compile on Windows at the moment.
Reviewed-by: Rich Salz <rsalz@openssl.org>
It is expensive to create the ASYNC_JOB objects due to the "makecontext"
call. This change adds support for pools of ASYNC_JOB objects so that we
don't have to create a new ASYNC_JOB every time we want to use one.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Where we can we should use longjmp and setjmp in preference to swapcontext/
setcontext as they seem to be more performant.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Removed the function ASYNC_job_is_waiting() as it was redundant. The only
time user code has a handle on a job is when one is waiting, so all they
need to do is check whether the job is NULL. Also did some cleanups to
make sure the job really is NULL after it has been freed!
Reviewed-by: Rich Salz <rsalz@openssl.org>
Create a "null" async implementation for platforms that lack support. This
just does nothing when called and therefore performs synchronously.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Provides support for running asynchronous jobs. Currently this is completely
stand alone. Future commits will integrate this into libssl and s_server/
s_client. An asynchronous capable engine will be required to see any benefit
from this capability.
Reviewed-by: Rich Salz <rsalz@openssl.org>