Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21135)
Make sure PN duplicate suppression is side-channel safe by doing
the duplicate test after AEAD verification.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21135)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21135)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21135)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21135)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21135)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21135)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21135)
The most expensive part of using a PKEY decoder is the
OSSL_DECODER_CTX_new_for_pkey() call. This builds up all of the decoder
chains, which is a complex and time consuming operation. However, if no
new providers have been loaded/unloaded since the last time it was called
we can expect the same results for the same parameters. Note that this
operation takes place *before* we event parse the data for decoding so it
is not dependent on the parsed data at all.
We introduce a cache for OSSL_DECODER_CTX objects. If we have been called
with the same parameters then we just duplicate an existing
OSSL_DECODER_CTX. This should be significantly faster than creating a new
one every time.
Partially addressed the issue in #15199
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21426)
Signed-off-by: Liu-ErMeng <liuermeng2@huawei.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21425)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21116)
We save the error state from the thread that encountered
a permanent error condition caused by system or internal
error to the QUIC_CHANNEL.
Then we restore it whenever we are returning to a user
call when protocol is shutdown.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21087)
We return SSL_ERROR_SYSCALL when network error is encountered.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21087)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
QUIC differs from TLS in this regard because it buffers the
data to be sent. TLS just encrypts the data to send in place.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21311)
The structure includes the count and optionally a lock.
The count has the appropriate qualifiers.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21260)
Signed-off-by: Jonathan M. Wilbur <jonathan@wilbur.space>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21232)
This QUIC server utility is intended for test purposes only and is expected
to be replaced in a future version of OpenSSL by s_server. At that point
it will be removed.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21204)
This is defined in NIST SP 800-208 as the truncation to 192 bits of
SHA256. Unlike other truncated hashes in the SHA2 suite, this variant
doesn't have a different initial state, it is just a pure truncation
of the output.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21180)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21029)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21029)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21029)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21029)
This is needed to support key update validation on the receive side.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21029)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21029)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21029)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21029)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21029)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21029)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21029)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21029)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21190)
Typos in doc/man* will be fixed in a different commit.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20910)
This can effectively reduce the binary size for platforms
that don't need ECX feature(~100KB).
Signed-off-by: Yi Li <yi1.li@intel.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20781)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Anton Arapov <anton@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21131)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20866)
The separate file is a Perl script that generates the appropriate define
directives for inclusion in core_names.h. By having this separation it
will be possible to prebuild data structures to give faster access when
looking up parameters by name.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20935)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19231)
Also remove needless constant_time_* and ERR_clear_error() calls
from OSSL_CRMF_ENCRYPTEDVALUE_get1_encCert().
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/17354)
When freeing the last reference to an EVP_PKEY there is no point in
taking the lock for the key. It is the last reference and is being freed
so must only be being used by a single thread.
This should not have been the source of any contention so its unclear to
what extent this will improve performance. But we should not be locking
when we don't need to.
Partially fixes#20286
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20932)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20879)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20879)
We create the internal/ssl.h header file and move the typedef for
ossl_msg_cb. This is needed by both the QUIC code (which generally doesn't
include ssl_local.h) and the rest of libssl.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20914)
We create setter functions for the msg_callback and msg_callback_arg so
that these values can be properly propagated to the QRX/QTX/TXP even
after the channel has been created.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20914)
Previously we were only doing tracing of frames received from the peer.
Now we do that for transmitted frames as well.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20914)
Extend the existing QUIC tracing capability for frames.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20914)
We enable SSL_trace support for when we receive QUIC Packets. This is
called after header protection is removed, but before the packet is
decrypted.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20914)
At this stage we just support msg_callback on receipt of a datagram.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20914)
and changed hopefully all occurences for that OID
Signed-off-by: Dragan Zuvic <dragan.zuvic@mercedes-benz.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20986)
We actively use only the latest DCID received. And retire only
DCIDs requested by the peer to be retired.
Also changed the active_conn_id_limit to 2 as the minimum value allowed.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20892)
This allows QUIC_STREAM objects to be deleted when they are no longer
needed.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20765)
We need to get acknowledgement notifications for our STOP_SENDING and
STREAM_RESET frames as this information is needed to know when we can
delete a QUIC_STREAM object.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20765)
Also use accept queue popping by the application as the retirement
event, i.e., as the cue to increase the limit.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20765)
Though the RXFC was designed for stream flow control, its logic
is generic enough to use to control MAX_STREAMS generation.
Control of when _we_ can open streams is already done in a bespoke
fashion and doesn't use a TXFC, however (see
ossl_quic_stream_map_update_state).
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20765)
We now refactor the interface between ssl_lib.c frontend functions and
the QUIC API Personality Layer so that the respective functions
comprising the interface use SSL object pointers rather than raw
QUIC_CONNECTION pointers. This is in preparation for stream support
since once streams are supported, calls to e.g. ossl_quic_write() may be
made on a QUIC_CONNECTION or a QUIC_XSO (that is, a stream object). Thus
we take a uniform approach across all functions comprising the interface
between the ssl_lib.c frontend and the QUIC API Personality Layer of
using SSL pointers always. This provides a uniform approach and
ensures that any function of the API personality layer can be easily
adapted to support being called on a stream object in the future.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20765)
The QUIC_XSO (external stream object) is to a QUIC stream what a
QUIC_CONNECTION is to a QUIC connection. Both are SSL objects. The
QUIC_CONNECTION type is the internal representation of a QUIC connection
SSL object (QCSO) and the QUIC_XSO type is the internal representation
of a QUIC stream SSL object (QSSO) type. The name QUIC_XSO has been
chosen to be distinct from the existing QUIC_STREAM type which is our
existing internal stream type. QUIC_XSO is to a QUIC_STREAM what
QUIC_CONNECTION is to a QUIC_CHANNEL; in other words, QUIC_CONNECTION
and QUIC_XSO objects form part of the API personality layer, whereas
QUIC_CHANNEL and QUIC_STREAM objects form part of the QUIC core and are
distinct from the API personality layer.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20765)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20832)
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20881)
Added a function to allocate a buffer and copy a maching param.
Added a function to allocate a buffer and concatenate all matching params.
Fixes#20717
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20724)
Also updated the corresponding documentations.
Fixes#20710
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20745)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20736)
This keeps the interface consistent with other HPKE API's.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20583)
This enables the cleansing of plaintext to occur in the record layer and
avoids the need to cast away const above the record layer.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20404)
Improves consistency with the QUIC rstream implementation - and improves
the abstraction between the TLS implementation and the abstract record
layer. We should not expect that the TLS implementation should be able to
change the underlying buffer. Future record layers may not expect that.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20404)
The QUIC TLS layer was taking an internal copy of rstream data while
reading. The QUIC rstream code has recently been extended to enable a
get/release model which avoids the need for this internal copy, so we use
that instead.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20404)
This reverts commit b1892d21f8.
Except for the moving derive_kdk to a separate function.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20281)
We have the existing functions SSL_version(), SSL_get_version() and
SSL_is_dtls(). We extend the first two to return something sensible when
using QUIC. We additionally provide the new functions SSL_is_tls() and
SSL_is_quic() to provide a mechanism to figure out what protocol we are
using.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20650)
Discovered during coverage testing.
Remove unneccesary check when using ossl_dh_get0_params() and
ossl_dsa_get0_params(). These point to addresses and can not fail
for any existing calls.
Make dsa keygen tests only available in the FIPS module - as they are
not used in the default provider.
Change ossl_ffc_set_digest() to return void as it cannot fail.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20359)
(And then __arm__ and __arm tests are redundant)
Fixes#20604
Change-Id: I4308e75b7fbf3be7b46490c3ea4125e2d91b00b8
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20620)
Add option for restricting digests available to DRBGs.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/20521)
Add support for the RFC7250 certificate-type extensions.
Alows the use of only private keys for connection (i.e. certs not needed).
Add APIs
Add unit tests
Add documentation
Add s_client/s_server support
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18185)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20204)
remove unneeded const qualifier to keep method declaration
and definition in sync.
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/20436)
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/20436)
Commit ac21c1780a VMS knows POSIX threads too!
removed ossl_crypto_mem_barrier for POSIX systems.
Remove it for Win32 and other architectures as well.
Resolves issue #19506 Unable to build under bcc32c environment (Embarcadero
clang compiler).
Signed-off-by: Čestmír Kalina <ckalina@redhat.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20538)
We create "real" sockets for blocking mode so that we can block on them.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20514)
For example if would be helpful if we got more useful information if the
caller forgot to set the peer address.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20514)
Add a gcc-only static assertion that a variable is of a specified type.
Signed-off-by: Čestmír Kalina <ckalina@redhat.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12256)
Signed-off-by: Čestmír Kalina <ckalina@redhat.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12256)
In RISC-V we have multiple extensions, that can be
used to accelerate processing.
The known extensions are defined in riscv_arch.def.
From that file test functions of the following
form are generated: RISCV_HAS_$ext().
In recent commits new ways to define the availability
of these test macros have been defined. E.g.:
#define RV32I_ZKND_ZKNE_CAPABLE \
(RISCV_HAS_ZKND() && RISCV_HAS_ZKNE())
[...]
#define RV64I_ZKND_ZKNE_CAPABLE \
(RISCV_HAS_ZKND() && RISCV_HAS_ZKNE())
This leaves us with two different APIs to test capabilities.
Further, creating the same macros for RV32 and RV64 results
in duplicated code (see example above).
This inconsistent situation makes it hard to integrate
further code. So let's clean this up with the following steps:
* Replace RV32I_* and RV64I_* macros by RICSV_HAS_* macros
* Move all test macros into riscv_arch.h
* Use "AND" and "OR" to combine tests with more than one extension
* Rename include files for accelerated processing (remove extension
postfix).
We end up with compile time tests for RV32/RV64 and run-time tests
for available extensions. Adding new routines (e.g. for vector crypto
instructions) should be straightforward.
Testing showed no regressions.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20078)
The EVP layer should not rely on the underlying low level code to
handle catching incorrect reuse of contexts.
Add a flag to mark a context as finalised as needed and then catch and
immediately error on Update/Final operations if called improperly.
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/20375)
Add API calls to avoid copying data when reading
These are ossl_quic_rstream_get_record() and
ossl_quic_rstream_release_record().
Add side storage for the stream frame data.
When there are too many packets referenced by the
receiving stream the function ossl_quic_rstream_move_to_rbuf()
can be called to move the data to a ring buffer.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19794)
include/internal/thread_arch.h didn't indicate this, now it does.
This also removes ossl_crypto_mem_barrier(), because we isn't used
anywhere, and doesn't build with compilers that don't support the GNU
extension __asm__.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/20440)
This is an unused internal function. It should be added back
in if there is a need to set this value to something other than
NID_mgf1 (which is not likely).
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20321)
Similiar checks to the DSA code have been added for ECDSA also.
This should not be a problem when using named groups.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20384)
Fixes#20268
Values such as q=1 or priv=0 caused infinite loops when calling
DSA_sign() without these changes.
There are other cases where bad domain parameters may have caused
infinite loops where the retry counter has been added. The simpler case
of priv=0 also hits this case. q=1 caused an infinite loop in the setup.
The max retry value has been set to an arbitrary value of 8 (it is
unlikely to ever do a single retry for valid values).
The minimum q bits was set to an arbitrary value of 128 (160 is still
used for legacy reasons when using 512 bit keys).
Thanks @guidovranken for detecting this, and @davidben for his
insightful analysis.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20384)
The provider functions OSSL_FUNC_keymgmt_import_types() and
OSSL_FUNC_keymgmt_export_types() do not get the provider context passed.
This makes it difficult for providers to implement these functions unless
its a static implementation returning a truly constant OSSL_PARAM array.
Some providers may have a need to return an OSSL_PARAM array that is
dependent on the provider configuration, or anything else that is contained
in its provider context.
Add extended variants of these functions that get the provider context passed.
The functions should still return a static and constant OSSL_PARAM array, but
may use the provider context to select the array to return dependent on its
context. The returned array must be constant at least until the provider is
unloaded.
Providers can implement only the original functions, or only the extended
functions, or both. Implementing at least one of those functions is required
if also the respective OSSL_FUNC_keymgmt_import() or OSSL_FUNC_keymgmt_export()
function is implemented. If an extended function is available, it is called by
evp_keymgmt_import_types() or evp_keymgmt_export_types(), otherwise the original
function is called.
This makes the code backward compatible. Existing providers will only implement
the original functions, so these functions will continued to be called.
Newer providers can choose to implement the extended functions, and thus can
benefit from the provider context being passed to the implementation.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20255)
Check that we fail if the server has failed to provide transport params.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20030)
Provide helper functions to listen for TLS handshake messages being sent,
as well as the ability to change the contents of those messages as well as
resizing them.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20030)
We add callbacks so that TLS handshake messages can be modified by the test
framework before they are passed to the handshake hash, possibly encrypted
and written to the network. This enables us to simulate badly behaving
endpoints.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20030)
We enable querying of the termination reason which is useful for tests.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20030)
Also includes helper support to create a QUIC connection inside a test.
We wil use quicfaultstest to deliberately inject faulty datagrams/packets
to test how we handle them.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20030)
We add callbacks so that QUIC packets can be modified by the test
framework before they are encrypted and written to the network. This
enables us to simulate badly behaving endpoints.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20030)
These aren't currently checked when they are called in cipher_aes_gcm_hw_armv8.inc,
but they are declared as returning as size_t the number of bytes they have processed,
and the aes_gcm_*_*_kernel (unroll by 4) versions of these do return the correct
values.
Change-Id: Ic3eaf139e36e29e8779b5bd8b867c08fde37a337
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20191)
S390x has to ability to offload modular exponentiation and CRT operations to
Crypto Express Adapters. This possible performance optimization was not yet
used by OpenSSL. Add support for offloading and implement an optimized
version of RSA and DH with it.
The environment variable OPENSSL_s390xcap now recognizes the token "nocex" to
prevent offloading.
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20113)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20205)
Avoid including QUIC related stuff in the FIPS sources.
Also avoid including libssl headers in ssl3_cbc.c.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19658)
The unused and untested internal function ossl_a2ucompare() has been
removed.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/20177)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 7a21a1b5fa2dac438892cf3292d1f9c445d870d9)
(cherry picked from commit 2ad9928170)
Fixes CVE-2023-0217
When attempting to do a BN_Copy of params->p there was no NULL check.
Since BN_copy does not check for NULL this is a NULL reference.
As an aside BN_cmp() does do a NULL check, so there are other checks
that fail because a NULL is passed. A more general check for NULL params
has been added for both FFC public and private key validation instead.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
A timing based side channel exists in the OpenSSL RSA Decryption
implementation which could be sufficient to recover a plaintext across
a network in a Bleichenbacher style attack. To achieve a successful
decryption an attacker would have to be able to send a very large number
of trial messages for decryption. The vulnerability affects all RSA
padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE.
Patch written by Dmitry Belyavsky and Hubert Kario
CVE-2022-4304
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Signed-off-by: Xu Yizhou <xuyizhou1@huawei.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19914)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18704)
Now that we have a real TLS handshake we no longer need the dummy handshake
implementation and it can be removed.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19748)
We start using the QUIC TLS implementation rather than the dummy one.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19748)
