The function BN_RECP_CTX_set did not check whether arg d is zero,
in which case an early failure should be returned to the invoker.
This is a similar fix to the cognate defect of CVE-2015-1794.
Fixes#21111
CLA: trivial
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21255)
Typos in doc/man* will be fixed in a different commit.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20910)
wvalue is always initialized at the beginning of each cycle
and used only within the cycle
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/21145)
The change is limited to a single C file.
CLA: trivial
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20912)
We no longer need to cast function pointers to PTR_SIZE_INT.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20748)
Bit-fiddling pointers is technically implementation defined behavior
in the C specification so the following code is not supported in all
platforms:
PTR_SIZE_INT mask;
void * a, b, c;
int boolean_flag;
mask = 0 - boolean_flag;
/* Not guaranteed to be a valid ptr to a or b on all platforms */
a = (void *)
((((PTR_SIZE_INT) b & ~mask) | (((PTR_SIZE_INT)) c & mask)));
Using a ternary conditional operator is supported on all platforms
(i.e. `a = boolean_flag ? b : c;`).
On most modern compilers/CPUs, this will be faster, since it will
get converted to a CMOV instruction.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20748)
This is about a timing leak in the topmost limb
of the internal result of RSA_private_decrypt,
before the padding check.
There are in fact at least three bugs together that
caused the timing leak:
First and probably most important is the fact that
the blinding did not use the constant time code path
at all when the RSA object was used for a private
decrypt, due to the fact that the Montgomery context
rsa->_method_mod_n was not set up early enough in
rsa_ossl_private_decrypt, when BN_BLINDING_create_param
needed it, and that was persisted as blinding->m_ctx,
although the RSA object creates the Montgomery context
just a bit later.
Then the infamous bn_correct_top was used on the
secret value right after the blinding was removed.
And finally the function BN_bn2binpad did not use
the constant-time code path since the BN_FLG_CONSTTIME
was not set on the secret value.
In order to address the first problem, this patch
makes sure that the rsa->_method_mod_n is initialized
right before the blinding context.
And to fix the second problem, we add a new utility
function bn_correct_top_consttime, a const-time
variant of bn_correct_top.
Together with the fact, that BN_bn2binpad is already
constant time if the flag BN_FLG_CONSTTIME is set,
this should eliminate the timing oracle completely.
In addition the no-asm variant may also have
branches that depend on secret values, because the last
invocation of bn_sub_words in bn_from_montgomery_word
had branches when the function is compiled by certain
gcc compiler versions, due to the clumsy coding style.
So additionally this patch stream-lined the no-asm
C-code in order to avoid branches where possible and
improve the resulting code quality.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20281)
This reverts commit b1892d21f8.
Except for the moving derive_kdk to a separate function.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20281)
Change-Id: Ia94e528a2d55934435de6a2949784c52eb38d82f
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20621)
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20519)
(cherry picked from commit d4765408c7)
This file was only recently introduced and the missing header slipped through
the review process.
Fixes#20461
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20470)
BN_priv_rand_range_ex() and BN_add() both return a 0 on failure and a 1
on success. In case of failure, the algorithm should fail. However, the
branch that it goes through on failure is "goto end", not "goto err".
Therefore, the algorithm will return 1 which indicates success instead
of 0 for failure, leading to potential problems for the callers.
Fix it by changing the goto to "goto err" instead of "goto end".
CLA: trivial
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20279)
_umul128() is x86_64 (x64) only, while __umulh() works everywhere, but
doesn't generate optimal code on x64
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20244)
S390x has to ability to offload modular exponentiation and CRT operations to
Crypto Express Adapters. This possible performance optimization was not yet
used by OpenSSL. Add support for offloading and implement an optimized
version of RSA and DH with it.
The environment variable OPENSSL_s390xcap now recognizes the token "nocex" to
prevent offloading.
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20113)
A timing based side channel exists in the OpenSSL RSA Decryption
implementation which could be sufficient to recover a plaintext across
a network in a Bleichenbacher style attack. To achieve a successful
decryption an attacker would have to be able to send a very large number
of trial messages for decryption. The vulnerability affects all RSA
padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE.
Patch written by Dmitry Belyavsky and Hubert Kario
CVE-2022-4304
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
If no-module or no-shared is used, the symbols from
libcrypto should not be duplicated in legacy.a
Also the BIGNUM functions are currently not needed
in legacy.a at all.
Fixes#20124
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20137)
Test included
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20033)
This allows calls with s==NULL and len==0 to be safe. It probably already
was, but address sanitizers could still complain.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20033)
Otherwise the alloca can cause an exception.
Issue reported by Jiayi Lin.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20005)
Reduce the Miller Rabin counts to the values specified by FIPS 186-5.
The old code was using a fixed value of 64.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19579)
FIPS 186-4 has 5 different algorithms for key generation,
and all of them rely on testing GCD(a,n) == 1 many times.
Cachegrind was showing that during a RSA keygen operation,
the function BN_gcd() was taking a considerable percentage
of the total cycles.
The default provider uses multiprime keygen, which seemed to
be much faster. This is because it uses BN_mod_inverse()
instead.
For a 4096 bit key, the entropy of a key that was taking a
long time to generate was recorded and fed back into subsequent
runs. Roughly 40% of the cycle time was BN_gcd() with most of the
remainder in the prime testing. Changing to use the inverse
resulted in the cycle count being 96% in the prime testing.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19578)
Otherwise the powerbufLen can overflow.
Issue reported by Jiayi Lin.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/19632)
Apple LLVM has a different version numbering scheme than upstream LLVM.
That makes for quite a bit of confusion.
https://en.wikipedia.org/wiki/Xcode#Toolchain_versions to the rescue,
they have collected quite a lot of useful data.
This change is concentrated around the `$avx512ifma` flag
Fixes#16670 for the master branch
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19361)
This happens rarely, but only because very few CI runs
use the exotic CPU type that is necessary to execute
anything within rsaz_exp_x2.c and enable UBSAN at the same time.
crypto/bn/rsaz_exp_x2.c:562:20: runtime error: load of misaligned address 0x612000022cc6 for type 'uint64_t' (aka 'unsigned long'), which requires 8 byte alignment
0x612000022cc6: note: pointer points here
84 a3 78 e0 8e 8d 4a a5 51 9c 57 d0 d6 41 f3 26 d1 4e e1 98 42 b5 3a 9f 04 f1 73 d2 1d bf 73 44
^
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior crypto/bn/rsaz_exp_x2.c:562:20 in
../../util/wrap.pl ../../fuzz/server-test ../../fuzz/corpora/server => 1
not ok 2 - Fuzzing server
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19394)
partially revamped from #16712
- fall thru -> fall through
- time stamp -> timestamp
- host name -> hostname
- ipv6 -> IPv6
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19059)
partially revamped from #16712
- fall thru -> fall through
- time stamp -> timestamp
- file name -> filename
- host name -> hostname
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19059)
Since OPENSSL_malloc() and friends report ERR_R_MALLOC_FAILURE, and
at least handle the file name and line number they are called from,
there's no need to report ERR_R_MALLOC_FAILURE where they are called
directly, or when SSLfatal() and RLAYERfatal() is used, the reason
`ERR_R_MALLOC_FAILURE` is changed to `ERR_R_CRYPTO_LIB`.
There were a number of places where `ERR_R_MALLOC_FAILURE` was reported
even though it was a function from a different sub-system that was
called. Those places are changed to report ERR_R_{lib}_LIB, where
{lib} is the name of that sub-system.
Some of them are tricky to get right, as we have a lot of functions
that belong in the ASN1 sub-system, and all the `sk_` calls or from
the CRYPTO sub-system.
Some extra adaptation was necessary where there were custom OPENSSL_malloc()
wrappers, and some bugs are fixed alongside these changes.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19301)
BN_check_prime() is supposed to return 0 for a composite number and -1
on error. Properly translate the return value of the internal function
ossl_bn_miller_rabin_is_prime(), where 0 means an error.
The confusion prevented BN_GENCB callbacks from aborting the primality
test or key generation routines utilizing this.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19314)
The patch enables BN_rand_range() to exit immediately
if BIGNUM *rnd is NULL.
CLA: trivial
Fixes: #18951
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18982)
In the reference C implementation in bn_asm.c, tp[num + 1] contains the
carry bit for accumulations into tp[num]. tp[num + 1] is only ever
assigned, never itself incremented.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18883)
This reverts commit 712d9cc90e.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18883)
BN_one() uses the expand function which calls malloc which may fail.
All other places that reference BN_one() check the return value.
The issue is triggered by a memory allocation failure.
Detected by PR #18355
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18697)
bn_reduce_once_in_place expects the number of BN_ULONG, but factor_size
is moduli bit size.
Fixes#18625.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18626)
Inspired by BoringSSL fix by David Benjamin.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18510)
This partially fixes a bug where, on x86_64, BN_mod_exp_mont_consttime
would sometimes return m, the modulus, when it should have returned
zero. Thanks to Guido Vranken for reporting it. It is only a partial fix
because the same bug also exists in the "rsaz" codepath.
The bug only affects zero outputs (with non-zero inputs), so we believe
it has no security impact on our cryptographic functions.
The fx is to delete lowercase bn_from_montgomery altogether, and have the
mont5 path use the same BN_from_montgomery ending as the non-mont5 path.
This only impacts the final step of the whole exponentiation and has no
measurable perf impact.
See the original BoringSSL commit
https://boringssl.googlesource.com/boringssl/+/13c9d5c69d04485a7a8840c12185c832026c8315
for further analysis.
Original-author: David Benjamin <davidben@google.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18510)
This reverts commit 0d40ca47bd.
It was found that the computation produces incorrect results in some
cases.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18512)
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18429)
Fixes#18321
Increase the iteration factor used when 'Computing a Probable Prime Factor Based on Auxiliary Primes' from 5 to 20.
This matches the algorithm update made in FIPS 186-5.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18429)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18518)
Rename x86-32 assembly files from .s to .S. While processing the .S file
gcc will use the pre-processor whic will evaluate macros and ifdef. This
is turn will be used to enable the endbr32 opcode based on the __CET__
define.
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18353)
As of clang-14 the strict aliasing is causing code to magically disappear.
By explicitly inlining the code, the aliasing problem evaporates.
Fixes#18225
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18258)
