The reseed counter condition was broken since a93ba40, where the
initial value was wrongly changed from one to zero.
Commit 8bf3665 fixed the initialization, but also adjusted the check,
so the problem remained.
This change restores original (OpenSSL-fips-2_0-stable) behavior.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/11195)
Removed dummy evp_test
Changed all algorithm properties to use fips=yes (except for RAND_TEST) (This changes the DRBG and ECX settings)
Removed unused includes.
Added TODO(3.0) for issue(s) that need to be resolved.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12498)
Fixes#12405Fixes#12377
Calling Init()/Update() and then Init()/Update() again gave a different result when using the same key and iv.
Cipher modes that were using ctx->num were not resetting this value, this includes OFB, CFB & CTR.
The fix is to reset this value during the ciphers einit() and dinit() methods.
Most ciphers go thru a generic method so one line fixes most cases.
Add test for calling EVP_EncryptInit()/EVP_EncryptUpdate() multiple times for all ciphers.
Ciphers should return the same value for both updates.
DES3-WRAP does not since it uses a random in the update.
CCM modes currently also fail on the second update (This also happens in 1_1_1).
Fix memory leak in AES_OCB cipher if EVP_EncryptInit is called multiple times.
Fix AES_SIV cipher dup_ctx and init.
Calling EVP_CIPHER_init multiple times resulted in a memory leak in the siv.
Fixing this leak also showed that the dup ctx was not working for siv mode.
Note: aes_siv_cleanup() can not be used by aes_siv_dupctx() as it clears data
that is required for the decrypt (e.g the tag).
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12413)
libcommon.a is FIPS agnostic, while libfips.a and libnonfips.a are
FIPS / non-FIPS specific. Since bio_prov.c checks FIPS_MODULE, it
belongs to the latter.
Along with this, a bit more instruction commentary is added to
providers/build.info.
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
(Merged from https://github.com/openssl/openssl/pull/12486)
As the ERR_raise() is setup at this point returng a range of negative values for errors is not required.
This will need to be revisited if the code ever moves to running from the DEP.
Added a -config option to the fips install so that it can test if a fips module is loadable from configuration.
(The -verify option only uses the generated config, whereas -config uses the normal way of including the generated data via another config file).
Added more failure tests for the raised errors.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12346)
This boils down to the operating system sources and RDRAND.
All other sources are not available in the FIPS module.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12325)
The commit claimed to make things more consistent. In fact it makes it
less so. Revert back to the previous namig convention.
This reverts commit 765d04c946.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12186)
The commit claimed to make things more consistent. In fact it makes it
less so. Revert back to the previous namig convention.
This reverts commit d9c2fd51e2.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12186)
Everything else to do with algorithm selection and properties is case
insensitive.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12450)
Added Algorithm names AES-128-CBC-CTS, AES-192-CBC-CTS and AES-256-CBC-CTS.
CS1, CS2 and CS3 variants are supported.
Only single shot updates are supported.
The cipher returns the mode EVP_CIPH_CBC_MODE (Internally it shares the aes_cbc cipher code). This
would allow existing code that uses AES_CBC to switch to the CTS variant without breaking code that
tests for this mode. Because it shares the aes_cbc code the cts128.c functions could not be used directly.
The cipher returns the flag EVP_CIPH_FLAG_CTS.
EVP_CIPH_FLAG_FIPS & EVP_CIPH_FLAG_NON_FIPS_ALLOW have been deprecated.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12094)
This moves test/ossl_test_endian.h to include/internal/endian.h and
thereby makes the macros in there our standard way to check endianness
in run-time.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/12390)
The following built-in curves do not have an assigned OID:
- Oakley-EC2N-3
- Oakley-EC2N-4
In general we shouldn't assume that an OID is always available.
This commit detects such cases, raises an error and returns appropriate
return values so that the condition can be detected and correctly
handled by the callers, when serializing EC parameters or EC keys with
the default `ec_param_enc:named_curve`.
Fixes#12306
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12313)
EVP_CipherUpdate is supposed to return 1 for success or 0 for error.
However for GCM ciphers it was sometimes returning -1 for error.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12288)
We were not correctly passing the provider ctx down the chain during
initialisation of a new cipher ctx. Instead the provider ctx got set to
NULL.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12288)
Other ciphers return the length of the Payload for TLS as a result of an
EVP_DecryptUpdate() operation - but ChaCha20-Poly1305 did not. We change
it so that it does.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12288)
The previous commits separated out the TLS CBC padding code in libssl.
Now we can use that code to directly support TLS CBC padding and MAC
removal in provided ciphers.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12288)
Change default FIPS HMAC KEY from all-zero's
Use default FIPSKEY if not given on command line.
Make all -macopt in fipsinstall optional
Make all tests, except fipsinstall, use the default -macopt and
-mac_name flags.
Define and use FIPSDIR variable on VMS/MMS.
Also use SRCDIR/BLDDIR in SRCTOP/BLDTOP.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12235)
The new naming scheme consistently usese the `OSSL_FUNC_` prefix for all
functions which are dispatched between the core and providers.
This change includes in particular all up- and downcalls, i.e., the
dispatched functions passed from core to provider and vice versa.
- OSSL_core_ -> OSSL_FUNC_core_
- OSSL_provider_ -> OSSL_FUNC_core_
For operations and their function dispatch tables, the following convention
is used:
Type | Name (evp_generic_fetch(3)) |
---------------------|-----------------------------------|
operation | OSSL_OP_FOO |
function id | OSSL_FUNC_FOO_FUNCTION_NAME |
function "name" | OSSL_FUNC_foo_function_name |
function typedef | OSSL_FUNC_foo_function_name_fn |
function ptr getter | OSSL_FUNC_foo_function_name |
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12222)
Move the three different DRBGs to the provider.
As part of the move, the DRBG specific data was pulled out of a common
structure and into their own structures. Only these smaller structures are
securely allocated. This saves quite a bit of secure memory:
+-------------------------------+
| DRBG | Bytes | Secure |
+--------------+-------+--------+
| HASH | 376 | 512 |
| HMAC | 168 | 256 |
| CTR | 176 | 256 |
| Common (new) | 320 | 0 |
| Common (old) | 592 | 1024 |
+--------------+-------+--------+
Bytes is the structure size on the X86/64.
Secure is the number of bytes of secure memory used (power of two allocator).
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/11682)
Also separate out the TSC and RDRAND based sources into their own file in the
seeding subdirectory.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/11682)
The test RNG can provide pre-canned entropy and nonces for testing other
algorithms.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/11682)
