This changeset adds the counterpart to the '-subj' option to allow overriding
the Issuer. For consistency, the `-subj` option is aliased to `-set_subject`.
The issuer can be specified as following apps/openssl x509 -new -set_issuer
'/CN=example-nro-ta' -subj '/CN=2a7dd1d787d793e4c8af56e197d4eed92af6ba13' ...
This is useful in constructing specific test-cases or rechaining PKI trees
Joint work with George Michaelson (@geeohgeegeeoh)
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23257)
Current PowerPC-related defines omit Darwin ppc64 case.
Use __POWERPC__ in place of __ppc__ + __ppc64__
Fixes#23220
CLA: trivial
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23245)
CLA: trivial
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23253)
OpenSSL's encoding of SM2 keys used the SM2 OID for the algorithm OID
where an AlgorithmIdentifier is encoded (for encoding into the structures
PrivateKeyInfo and SubjectPublicKeyInfo).
Such keys should be encoded as ECC keys.
Fixes#22184
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22529)
When parsing the stable section of a config such as this:
openssl_conf = openssl_init
[openssl_init]
stbl_section = mstbl
[mstbl]
id-tc26 = min
Can lead to a SIGSEGV, as the parsing code doesnt recognize min as a
proper section name without a trailing colon to associate it with a
value. As a result the stack of configuration values has an entry with
a null value in it, which leads to the SIGSEGV in do_tcreate when we
attempt to pass NULL to strtoul.
Fix it by skipping any entry in the config name/value list that has a
null value, prior to passing it to stroul
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22988)
Add test case for re-using a cipher context with the same key, iv and
cipher. It detects, if the hardware-specific cipher context is reset
correctly, like reported in issue #23175.
This test has encrypt and decrypt iterations for cfb128 and
ofb128. All iteations use the same key, iv and plaintext.
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23201)
Use the number of processed bytes information (num) from the generic
cipher context for the partial block handling in cfb and ofb also in
s390x-legacy code. For more details see 4df92c1a14 ("Fix partial block
encryption in cfb and ofb for s390x").
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23201)
Use the number of processed bytes information (num) from the generic
cipher context for the partial block handling in cfb and ofb, instead
of keep this information in the s390x-specific part of the cipher
context. The information in the generic context is reset properly,
even if the context is re-initialized without resetting the key or iv.
Fixes: #23175
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23201)
Match behavior of all other x86_64 asm.
CLA: trivial
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23219)
For GMAC/CMAC, its not possible to re-init the algorithm without
explicitly passing an OSSL_MAC_PARAM_IV to each init call, as it is
not possible to extract the IV value from the prior init call (be it
explicitly passed or auto generated). As such, document the fact that
re-initalization requires passing an IV parameter
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23235)
Fixes#22818
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22860)
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23191)
Even in the good case there was memory leak here.
Add a simple test case to have at least some test coverage.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23234)
When a subsequent call to SXNET_add_id_asc fails
e.g. because user is a string larger than 64 char
or the zone is a duplicate zone id,
or the zone is not an integer,
a memory leak may be the result.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23234)
The AES-CTR assembly code uses v8-v15 registers, they are
callee-saved registers, they must be preserved before the
use and restored after the use.
Change-Id: If9192d1f0f3cea7295f4b0d72ace88e6e8067493
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23233)
The base type OSSL_PARAM getters will NULL deref if they are initalized
as null. Add NULL checks for those parameters that have no expectation
of returning null (int32/64/uint32/64/BN). Other types can be left as
allowing NULL, as a NULL setting may be meaningful (string, utf8str,
octet string, etc).
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23083)
Fixes CVE-2023-6129
The POLY1305 MAC (message authentication code) implementation in OpenSSL for
PowerPC CPUs saves the the contents of vector registers in different order
than they are restored. Thus the contents of some of these vector registers
is corrupted when returning to the caller. The vulnerable code is used only
on newer PowerPC processors supporting the PowerISA 2.07 instructions.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23200)
It would be helpful to be able to generate RSA's dmp1/dmq1/iqmp values
when not provided in the param list to EVP_PKEY_fromdata. Augment the
provider in ossl_rsa_fromdata to preform this generation iff:
a) At least p q n e and e are provided
b) the new parameter OSSL_PARAM_RSA_DERIVE_PQ is set to 1
Fixes#21826
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21875)
* Print a message about why the failure is
happening.
* Send the usage information.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22855)
The pointer size support is already in the code, and is present for
all other supported hardwares.
Fixes#22899
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/23081)
(cherry picked from commit a43f253d58)
An effort was made to update the VMS installation data to align with
configuration data. This touched the script templates in VMS/, but
didn't update the generation of vmsconfig.pm to match... and also
missed a spot.
This change adds the missing updates
Ref:
https://github.com/openssl/openssl/pull/16842Fixes#22899
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/23081)
(cherry picked from commit 4058e121cb)
kdf_pbkdf1_do_derive stores key derivation information in a stack
variable, which is left uncleansed prior to returning. Ensure that the
stack information is zeroed prior to return to avoid potential leaks of
key information
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23194)
There are several points during x509 extension creation which rely on
configuration options which may have been incorrectly parsed due to
invalid settings. Preform a value check for null in those locations to
avoid various crashes/undefined behaviors
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23183)
Fedora has some fairly nice interoperability tests that we can leverage
to build a PR and test it against gnutls and nss libraries. This commit
adds the interop-tests.yml ci job to do that work, and run the interop
tests from beaker.
Fixes#20685
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22726)
It was pointed out the GITHUB_WORKSPACE points to the container path of
the workspace, so we can use it instead of hardcoding the
__w/openssl/openssl path
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22726)
Fedora has some fairly nice interoperability tests that we can leverage
to build a PR and test it against gnutls and nss libraries. This commit
adds the interop-tests.yml ci job to do that work, and run the interop
tests from beaker.
Fixes#20685
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22726)
The ssl_old_test has not been fully converted to the test framework but
it still reuses some test framework utilities. Notably it was creating
it's own copy of the global bio_err object directly (which is normally
created and owned by the test framework). This causes a problem because
ever since commit 2fa9044 access to the bio_err object is controlled by
a lock. Since ssl_old_test was circumventing the normal creation and
destruction of bio_err, the lock was not being created resulting in a
crash under certain error conditions.
We fix this by creating and destroying the bio_err object using the
test framework functions designed for that purpose.
Fixes#23184
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23187)
Issue #23151 asks a question about the meaning of the PKCS12
documentation. This PR attempts to clarify how friendlyName and localKeyID
are added to the PKCS12 structure.
Fixes#23151
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/23188)
Most of the callers do not actually check for
the special -1 return condition because they do not
pass NULL to it. It is also extremely improbable that
any code depends on this -1 return value in this condition
so it can be safely changed to 0 return.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/22930)
If the output of a blake2[b|s] digest isn't a multipl of 8, then a stack
buffer is used to compute the final output, which is left un-zeroed
prior to return, allowing the potential leak of key data. Ensure that,
if the stack variable is used, it gets cleared prior to return.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23173)
