an assembler for Windows on Arm builds and also clang-cl as the compiler
as well. Make appropriate changes to armcap source and peralsm scripts.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19523)
NOTE: Not Configurations/unix-Makefile.tmpl, as that was done 4 years
ago, in commit a23f03166e.
So far assembly modules were intended to be built as .pl->.S->.{asmext}
followed by .{asmext}->.o. This posed a problem in build_all_generated
rule if it was executed on another computer, and also turned out to be
buggy, as .S was also translated to .{asmext} on Windows and VMS.
Both issues are fixed by changing the rule sequence to .pl->.S and then
.S->.s->.o, with the added benefit that the Windows and VMS build file
templates are more in sync with unix-Makefile.tmpl and slightly simpler.
Fixes#19594
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19598)
Directories and file names with spaces require quoting... again
Fixes#18880
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18881)
This resolves the faulty LIBRARY value that contained the directory
of the product (.dll) in the build tree. This applies to engines and
other modules alike.
Fixes#18726
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/18732)
Since this file is generated by configdata.pm, there's no need to include it
among the mandatory dependencies (which end up in the `GENERATE_MANDATORY`
Makefile variable). In fact, it shouldn't be there any more, as that would
also cause it to be removed by `make clean`.
To compensate, we add an explicit removal of that file in the `distclean`
target on all platform families.
Fixes#18396
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18398)
Otherwise, it seems nmake doesn't invoke perl properly.
Signed-off-by: Keith W. Campbell <keithc@ca.ibm.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18215)
Before PR #15310, which reworked how build files (Makefile, ...) were
generated, everything was done when configuring, so configdata.pm
could depend on build file templates and we'd get away with it.
However, since building configdata.pm is now independent of the build
file templates, that dependency is unnecessary, and would lead to
surprises of the build file template is updated, with an unexpected
full reconfiguration as a result, when all that's needed is to run
configdata.pm with no flags to get the build file re-generated.
This change is therefore a completion of what was forgotten in #15310.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17756)
The doc/html sub-dirs get created by Configure. Therefore they should
not be cleaned away by "nmake clean". Otherwise the following sequence
fails:
perl Configure VC-WIN64A
nmake clean
nmake
nmake install
Fixes#17114
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17128)
When remaking how programs were linked, the variable `$ress` was forgotten.
Unfortunately, perl treats this with silence.
Fixes#16870Fixes#16667
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16875)
We changed the manner in which a build needing applink is detected,
but forgot to change the installation targets accordingly.
Fixes#16570
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16577)
(cherry picked from commit de36ce47bf)
This function tried to shave off the pre-release and build metadata
text from the the version number it gets, but didn't do that quite
right. Since this isn't even a documented behaviour, the easier, and
arguably more correct path is for that function not to try to shave
off anything, and for the callers to feed it the short version number,
"{MAJOR}.{MINOR}.{PATCH}", nothing more.
The build file templates are adjusted accordingly.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16556)
Also fix some inconsistencies and minor bugs related to the
install_fips target on Windows and VMS.
Fixes#16194
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16208)
nmake is tolerant of those empty lines, but jom isn't. That tolerance
isn't standard make behaviour, so we lean towards avoiding them.
We simply use '@rem' instead.
Fixes#16014
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16048)
Perl's system() on VMS needs to have the command line properly fixed
up, even with arguments passed in list form. We arrange that by
having util/wrap.pl use the same command line fixups as OpenSSL::Test.
As a consequence, util/wrap.pl needs to be generated, to easily pick
up data from configdata.pm. This also removes yet another file
copying hack from the build file templates.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15791)
The in2script functions generates the build file rules for generating
scripts from .in files. A dependency on configdata.pm is needed,
since it's being used for this.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15792)
to avoid collision with rmdir.exe from cygwin or msys
Original idea by Mladen Turk @mturk
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15610)
For some types of targets, we pretty much know what kinds of files all
the dependencies are. For some, however, we can't assume anything,
and are faced with dependencies in platform agnostic form. We need to
find those in diverse places in %unified_info, and deduce from there
how they should be converted to a platform specific form.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15436)
First of all, we have concluded that we can calculate the integrity
checksum with a simple perl script.
Second, having the production of providers/fipsmodule.cnf as a
dependency for run_tests wasn't quite right. What we really want is
to generate it as soon as a new providers/fips.so is produced. That
required a small bit of fiddling with how diverse dependencies are
made.
Fixes#15166
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15436)
quotify1() and quotify_l() were in OpenSSL::Template, but should be
more widely usable.
configdata.pm.in's out_item() is also more widely useful and is
therefore moved to OpenSSL::Util as well, and renamed to dump_data().
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15310)
Pull request #14320 introduced the ability to use compiled programs
as generators in GENERATE rules of build.info files. Those generator
calls were wrapped by the Perl wrapper (wrap.pl) in the Unix makefile
template, but not on Windows.
This commit adds the missing wrapper for Windows, because for the
`fipsmodule.cnf` target it is essential that the `openssl fipsinstall`
command does not load any preinstalled openssl configuration file.
Fixes#13680
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13684)
To follow the principle "what you configure is what you install",
the `make install` target now includes the installation of the
fips provider (`make install_fips`) if (and only if) OpenSSL was
configured with fips support (`enable-fips`).
The `make install_fips` target exists as well and can be used
to install just the fips provider. It requires `enable-fips`
and issues an error message if `no-fips` was configured.
The anologue holds for the 'uninstall_fips' target.
Fixes#13693
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13684)
There is already a `providers/fipsmodule.cnf` target which is required by
the tests. Instead of creating another fipsmodule.cnf, the `install_fips`
target simply copies that configuration file to its final destination.
This commit also restores the minimal dependencies to build the `install_fips`
target immediately after configuring, which was broken after the removal
of the `install_sw` dependency.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13684)
According to the OpenSSL 3.0 Wiki, the file should be located at
$(DESTDIR)$(OPENSSLDIR)/fipsmodule.cnf
next to the openssl.cnf file.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13684)
The `openssl` app was previously called without a path, which
would generally invoke the system's copy of the openssl application.
Currently, that's most likely an openssl version 1.1.1 application,
which does not recognize the `fipsinstall` command and terminates
with an error message.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13684)
The FIPS hmac key is provided as a hexadezimal string, which needs to
be be prefixed with `hexkey:`, not `key:`.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13684)
Previously, we had dependency making pretty much hard coded in the
build file templates, with a bit of an exception for Unix family
platforms, where we had different cases depending on what dependency
making program was found.
With the Embarcadero C++ builder, a separate scheme appeared, with a
different logic.
This change merges the two, and introduces two config target
attributes:
makedepcmd The program to use, where this is relevant.
This replaces the earlier configuration
attribute 'makedepprog'.
makedep_scheme This is a keyword that can be used by build
files templates to produce different sorts of
commands, but most importantly, to pass as
argument to util/add-depend.pl, which uses
this keyword as a "producer" for the
dependency lines.
If the config target doesn't define the 'makedep_scheme' attribute,
Configure tries to figure it out by looking for GCC compatible
compilers or for the 'makedepend' command.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/15006)
The modified way to generate .d files had an unfortunate side effect,
that it outputs the whole preprocessed file and not just the dependency
lines, at least with MSVC's cl. That gave util/add-depends.pl a whole
lot more to read through, which impacts greatly on the performance of
dependency treatment.
We modify the process by adding a config target attribute 'make_depend',
which can be any suitable command for generating such lines. All it
needs is to also accept C flags and macro definitions.
Fixes#14994
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/15006)
MSVC's `link.exe` automatically finds `__cdecl` C functions (which are
decorated with a leading underscore by the compiler) when they are
mentioned in a `.def` file without the leading underscore. This is an
[under-documented feature][1] of MSVC's `link.exe`. C++Builder's
`ilink32.exe` doesn't do this, and thus needs the name-translation in
the `.def` file. Then `implib.exe` needs to be told to re-add it.
(The Clang-based `bcc32c.exe` doesn't implement the [`-vu` or `-u-`][2]
options to skip adding the leading underscore to `__cdecl` C function
names, so this is the only way to have things work with non-underscored
export names in the DLLs.)
[1]: https://github.com/MicrosoftDocs/cpp-docs/issues/2653
[2]: http://docwiki.embarcadero.com/RADStudio/Sydney/en/Options_Not_Supported_by_Clang-enhanced_C%2B%2B_Compilers#BCC32_Options_that_Are_Not_Supported_by_Clang-enhanced_C.2B.2B_Compilers
Also silence linker warnings on duplicate symbols and ensure that error-
case cleanup in link rules work in C++Builder's `make.exe`.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/13540)
Microsoft NMake runs the entire command block in a single `cmd.exe`
session, so environment variables exported with `set` are seen by the
following commands. C++Builder's `make.exe` doesn't use `cmd.exe` but
executes each command line separately. While it emulates only certain
shell features itself, `set` isn't one of them.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/13540)
C++Builder's `make.exe` cannot handle a command output redirection to a
quoted filename, saying: "The system cannot find the file specified."
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/13540)
C++Builder's `make.exe` complains if a target has no dependencies (e.g.
after variable expansion) and no lines of commands. Ensure there is a
blank command line if the dependency list is entirely made of variables.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/13540)
C++Builder's `make.exe` has a bug in finding the rule of a quoted
dependency that doesn't exist in the filesystem. So for example:
A: "src\B" "out\C"
touch $@
out\C:
mkdir out
touch $@
leads to:
Fatal: '"out\C"' does not exist - don't know how to make it
This happens even with the `-N` option, and is different behavior from
Microsoft NMake which documents the feature of [quoted filepaths][1].
Commit cb663908 quoted all dependency filepaths, in case they are used
in a out-of-source build. The quoting is not done for target names,
however, which implies that the build directory is still expected to not
have spaces. It follows that we only need to quote non-generated source
files in dependency lists, since generated source files will be created
in the build directory.
Change the logic accordingly as a workaround, so that it works at least
for in-source builds with C++Builder's `make.exe`.
[1]: https://docs.microsoft.com/cpp/build/reference/long-filenames-in-a-makefile?view=msvc-160
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/13540)
The space is problematic with C++Builder (`bcc32.exe`). MSVC (`cl.exe`)
doesn't care.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/13540)
