If we have TLSv1.3 enabled then we must have at least one TLSv1.3 capable
group available. This check was not always working
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/14430)
If the EVP_MD_CTX_ctrl is deprecated the code will
generate deprecation warnings. So there is no point in marking
all EVP_MD_CTX_ctrl() calls with TODOs.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14367)
The low level DH API has two functions for checking parameters:
DH_check_ex() and DH_check_params_ex(). The former does a "full" check,
while the latter does a "quick" check. Most importantly it skips the
check for a safe prime. We're ok without using safe primes here because
we're doing ephemeral DH.
Now that libssl is fully using the EVP API, we need a way to specify that
we want a quick check instead of a full check. Therefore we introduce
EVP_PKEY_param_check_quick() and use it.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/14146)
The low level SRP implementation has been deprecated with no replacement.
Therefore the libssl level APIs need to be similarly deprecated.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14132)
This field has not been used since #3858 was merged in 2017 when we
moved to a table-based lookup for certificate type properties instead of
an index-based one.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/13991)
The existing names such as EVP_PKEY_param_fromdata_settable were a bit
confusing since the 'param' referred to key params not OSSL_PARAM. To simplify
the interface a 'selection' parameter will be passed instead. The
changes are:
(1) EVP_PKEY_fromdata_init() replaces both EVP_PKEY_key_fromdata_init() and EVP_PKEY_param_fromdata_init().
(2) EVP_PKEY_fromdata() has an additional selection parameter.
(3) EVP_PKEY_fromdata_settable() replaces EVP_PKEY_key_fromdata_settable() and EVP_PKEY_param_fromdata_settable().
EVP_PKEY_fromdata_settable() also uses a selection parameter.
Fixes#12989
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14076)
The supported groups code was checking the OPENSSL_NO_EC and
OPENSSL_NO_DH guards in order to work, and the list of default groups was
based on those guards. However we now need it to work even in a no-ec
and no-dh build, because new groups might be added from providers.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13916)
The default supported groups code was disabled in the event of a build
with no-ec and no-dh. However now that providers can add there own
groups (which might not fit into either of these categories), this is
no longer appropriate.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13916)
This removes man unnecessary OPENSSL_NO_DH guards from libssl. Now that
libssl is entirely using the EVP APIs and implementations can be plugged
in via providers it is no longer needed to disable DH at compile time in
libssl. Instead it should detect at runtime whether DH is available from
the loaded providers.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13916)
The client-side cert verification callback function may not only return
as usual for success or 0 for failure, but also -1,
typically on failure verifying the server certificate.
This makes the handshake suspend and return control to the calling application
with SSL_ERROR_WANT_RETRY_VERIFY.
The app can for instance fetch further certificates or cert status information
needed for the verification.
Calling SSL_connect() again resumes the connection attempt
by retrying the server certificate verification step.
This process may even be repeated if need be.
The core implementation of the feature is in ssl/statem/statem_clnt.c,
splitting tls_process_server_certificate() into a preparation step
that just copies the certificates received from the server to s->session->peer_chain
(rather than having them in a local variable at first) and returns to the state machine,
and a post-processing step in tls_post_process_server_certificate() that can be repeated:
Try verifying the current contents of s->session->peer_chain basically as before,
but give the verification callback function the chance to pause connecting and
make the TLS state machine later call tls_post_process_server_certificate() again.
Otherwise processing continues as usual.
The documentation of the new feature is added to SSL_CTX_set_cert_verify_callback.pod
and SSL_want.pod.
This adds two tests:
* A generic test in test/helpers/handshake.c
on the usability of the new server cert verification retry feature.
It is triggered via test/ssl-tests/03-custom_verify.cnf.in (while the bulky auto-
generated changes to test/ssl-tests/03-custom_verify.cnf can be basically ignored).
* A test in test/sslapitest.c that demonstrates the effectiveness of the approach
for augmenting the cert chain provided by the server in between SSL_connect() calls.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13906)
Update constant to maximum permitted by RFC 8446
Fixes#13868
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13874)
Fixes#13183
From the original issue report, before this commit, on master and on
1.1.1, the issue can be detected with the following steps:
- Start with a default SSL_CTX, initiate a TLS 1.3 connection with SNI,
"Accept" count of default context gets incremented
- After servername lookup, "Accept" count of default context gets
decremented and that of SNI context is incremented
- Server sends a "Hello Retry Request"
- Client sends the second "Client Hello", now again "Accept" count of
default context is decremented. Hence giving a negative value.
This commit fixes it by adding a check on `s->hello_retry_request` in
addition to `SSL_IS_FIRST_HANDSHAKE(s)`, to ensure the counter is moved
only on the first ClientHello.
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13297)
The configuration option 'no-rsa' was dropped with OpenSSL 1.1.0, so
this is simply a cleanup of the remains.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13700)
A servername cb may change the available certificates, so if we have one
set then we cannot rely on the configured certificates to determine if we
are capable of negotiating TLSv1.3 or not.
Fixes#13291
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13304)
For the moment, we translate the result to a NID, because that's still
used in several locations in libssl. Future development should change
all the internals to be name based instead.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13436)
no-dh disables the low level API for DH. However, since we're now using
the high level EVP API in most places we don't need to disable quite so
much.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13368)
We instead set the encoded public key directly in the EVP_PKEY object.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13368)
We get DH related parameters directly from the EVP_PKEY instead of
downgrading to a DH object first.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13368)
There is no need for us to downgrade the EVP_PKEY into a DH object
for this function so we rewrite things to avoid it.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13368)
These ctrls pass around a DH object which is now deprecated, so we
deprecate the ctrls themselves.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13368)
Previously we were constructing a DH object and then assigning it to an
EVP_PKEY. Instead we construct an EVP_PKEY directly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13368)
Previously a DH object was constructed and then assigned to an EVP_PKEY.
Instead we now construct the EVP_PKEY directly instead.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13368)
Since SSLfatal() doesn't take a function code any more, we drop that
argument everywhere. Also, we convert all combinations of SSLfatal()
and ERR_add_data() to an SSLfatal_data() call.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13316)
ossl_statem_fatal() is refactored to be an extended ERR_set_error(),
and SSLfatal() is refactored to work like ERR_raise(). We also add
SSLfatal_data() to work like ERR_raise_data().
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13316)
Use SSL_R_NO_PROTOCOLS_AVAILABLE instead of ERR_R_INTERNAL_ERROR,
to match what the BoringSSL tests expect for this case.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13251)
We were missing a call to SSLfatal. A comment claimed that we had already
called it - but that is incorrect.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/13229)
We do the same thing for the "get1" version. In reality this has broader
use than just TLS (it can also be used in CMS), and "encodedpoint" only
makes sense when you are talking about EC based algorithms.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13105)
The security operation SSL_SECOP_TMP_DH is defined to take an EVP_PKEY
in the "other" parameter:
/* Temporary DH key */
# define SSL_SECOP_TMP_DH (7 | SSL_SECOP_OTHER_PKEY)
In most places this is what is passed. All these places occur server side.
However there is one client side call of this security operation and it
passes a DH object instead. This is incorrect according to the
definition of SSL_SECOP_TMP_DH, and is inconsistent with all of the other
locations.
Our own default security callback, and the debug callback in the apps,
never look at this value and therefore this issue was never noticed
previously. In theory a client side application could be relying on this
behaviour and could be broken by this change. This is probably fairly
unlikely but can't be ruled out.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/13136)
We create a new file ssl/tls_depr.c to contain functions that need to call
deprecated APIs in libssl. This enables us to remove
OPENSSL_SUPPRESS_DEPRECATED from a number of other libssl files.
The deprecated API usage is either related to ENGINEs and is needed to
continue to support applications that use such ENGINEs. Or they are needed
to support some deprecated public libssl APIs.
One other file remains in libssl that still uses deprecated APIs: s3_cbc.c
This is needed to support the deprecated SSLv3.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13135)
Automatically rename all instances of _with_libctx() to _ex() as per
our coding style.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12970)
The check is applied only with X509_V_FLAG_X509_STRICT.
Fixes#12139
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12683)
We fix 3 problems with safestack:
- Including an openssl header file without linking against libcrypto
can cause compilation failures (even if the app does not otherwise need
to link against libcrypto). See issue #8102
- Recent changes means that applications in no-deprecated builds will need
to include additional macro calls in the source code for all stacks that
they need to use - which is an API break. This changes avoids that
necessity.
- It is not possible to write code using stacks that works in both a
no-deprecated and a normal build of OpenSSL. See issue #12707.
Fixes#12707
Contains a partial fix for #8102. A similar PR will be needed for hash to
fully fix.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12781)
If we don't have MD5-SHA1 then we must be use (D)TLSv1.2 or above. We
check that this is consistent with the way we've been configured. We also
ensure that we never attempt to negotiate <(D)TLSv1.2 if MD5-SHA1 is not
available.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12733)
