PR #18345 added some code for an event queue. It also added a test for it.
Unfortunately this event queue code has never been used for anything.
Additionally the test was never integrated into a test recipe, so it never
actually gets invoked via "make test". This makes the code entirely dead,
unnecessarily bloats the size of libssl and causes a decrease in our
testing code coverage value.
We remove the dead code.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25100)
This uses a FIPS indicator.
Since DSA KeyGen is only useful for DSA signing,
it reuses the DSA signing FIPS configuration option and settable ctx name.
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24978)
Added OSSL_FUNC_keymgmt_gen_get_params() and
OSSL_FUNC_keymgmt_gen_gettable_params()
This will allow a FIPS indicator parameter to be queried after keygen.
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24978)
Since FIPS provider performs lower bound check by default from v3.0, the
default value for new configurable item will be one.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24120)
Avoid using a fetched cipher that is decrypt-only
which is the case for 3DES from the fips provider.
Add a decrypt-only parameter to the EVP_CIPHER and test it
in libssl when fetching.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25028)
There is a issue currently related to CMAC TDES, when the new provider
is tested against older branches.
The new strict check caused backwards compatibility issues when
using old branch with the new FIPS provider.
To get around this CMAC now allows TDES by default, but it can be either
enabled via config or a settable. (i.e it uses an indicator)
Where the TDES cipher check can be done turned out to be problematic.
Shifting the check in the TDES cipherout of the init doesnt work because
ciphers can run thru either final or cipher (and checking on every
cipher call seemed bad). This means it needs to stay in the cipher init.
So the check needs to be done in CMAC BEFORE the underlying TDES cipher
does it check.
When using an indicator the TDES cipher needs its "encrypt-check" set
so that needs to be propagated from the CMAC object. This requires
the ability to set the param at the time the cipher ctx is inited.
An internal function was required in order to pass params to CMAC_Init.
Note also that the check was done where it is, because EVP_Q_mac() calls
EVP_MAC_CTX_set_params(ctx, cipher_param)
EVP_MAC_CTX_set_params(ctx, params)
EVP_MAC_init(ctx, key, keylen, params)
Where the second call to set_params would set up "encrypt-check" after
"cipher".
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25022)
In FIPS 140-3, RSA Signing with X9.31 padding is not approved,
but verification is allowed for legacy purposes. An indicator has been added
for RSA signing with X9.31 padding.
A strict restriction on the size of the RSA modulus has been added
i.e. It must be 1024 + 256 * s (which is part of the ANSI X9.31 spec).
Added implementation comments to the X9.31 padding code
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/24021)
This leaves 3DES with the FIPS query "FIPS=yes", which allows
Triple-DES to be used for Decryption by default.
Disallow CMAC using Triple-DES in FIPS.
This does not use a FIPS indicator.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/24960)
This is a FIPS 140-3 requirement.
This uses a FIP indicator if either the FIPS configurable "dsa_sign_disabled" is set to 0,
OR OSSL_SIGNATURE_PARAM_FIPS_SIGN_CHECK is set to 0 in the dsa signing context.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24799)
In this commit, we also return different error if the digest is XOF.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23889)
CLA: trivial
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/24927)
utility function to give us sane checking on strtoul conversions
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24861)
Fixed#7310: Enhanced existing documentation for password input methods
- Refined descriptions for password input methods: `file:`, `fd:`, and `stdin`
- Enhanced readability and consistency in the instructions
- Clarified handling of multiple lines in read files.
- Clarified that `fd:` is not supported on Windows.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24878)
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/24819)
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/24819)
Fixes#7941: Update the `EVP_EncryptUpdate` documentation to specify that in-place encryption is guaranteed only if the context does not contain incomplete data from previous operations.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24887)
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24881)
The "max_request" string is defined via the OSSL_RAND_PARAM_MAX_REQUEST
macro.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24863)
The introduction of a deprecation notice between the header include
line and the function prototypes left the inclusion in the previous
block. Move the #include to after the deprecation notice to ensure
that the headers is included together with the corresponding MDX_y*
functions.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24864)
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/24858)
Add documentation for the internal flags `EVP_MD_CTX_FLAG_CLEANED` and
`EVP_MD_CTX_FLAG_REUSE`, explicitly stating that these flags are for
internal use only and must not be used in user code.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24829)
This changes the logic to always do the security checks and then decide
what to do based on if this passes or not. Failure of a check causes
either a failure OR the FIPS indicator callback to be triggered.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24623)
Add a FIPS indicator callback that can be set via
OSSL_INDICATOR_set_callback(). This callback is intended to be run
whenever a non approved algorithm check has occurred and strict checking
has been disabled.The callback may be used to
log non approved algorithms. The callback is passed a type and
description string as well as the cbarg specified in OSSL_INDICATOR_set_callback.
The return value can be either 0 or 1.
A value of 0 can be used for testing purposes to force an error to occur from the algorithm
that called the callback.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24623)
