FIPS provider correctly supports no-des build time option and doesn't
advertise DES related algorithms. However KAT test for DES is still
attempted to be executed and fails.
This prevents configuring FIPS provider without legacy behaviour as
defined in SP 800-131Arev2. Also see #25761 internal docs.
Fix `enable-fips no-des` build option, and add a daily checker for
"legacy-free" (as much as currently feasible) FIPS configuration.
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25762)
Self tests no longer use the EVP_DigestSign/Verify API's.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25570)
Similar to other KDFs, the input key should be 112 bits long.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25529)
See Section 5 Key Agreement Using Diffie-Hellman and MQV of
[NIST SP 800-131Ar2](https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-131Ar2.pdf).
Strengths less than 112bits is disallowed, thus eliminating SHA1.
Skip cms test case that requires use of SHA1 with X9.42 DH.
Rename ossl_fips_ind_digest_check to ossl_fips_ind_digest_exch_check
Add myself to Changes for fips indicator work
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/25517)
For FIPS 140-3 the continuous tests specified in SP 800-90B need to be
included on the output of any entropy source.
They are implemented here as a replacement for the primary DRBG in the FIPS
provider. This results in a setup that looks like this:
+-------------+
| |
| Seed Source |
| |
+------+------+
|
|
v
+-------------+
| |
| CRNG Test |
| |
++----------+-+
| |
| |
v v
+--------------+ +--------------+
| | | |
| Public DRBG | | Private DRBG |
| | | |
+--------------+ +--------------+
An additional benefit, that of avoiding DRBG chains, is also gained.
The current standards do not permit the output of one DRBG to be used
as the input for a second (i.e. a chain).
This also leaves open the future possibility of incorporating a seed
source inside the FIPS boundary.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25415)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24992)
(in the code, "sigalg" is used to refer to these composite algorithms,
which is a nod to libcrypto and libssl, where that term is commonly used
for composite algorithms)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24992)
Add EVP_PKEY_{sign,verify}_message support for our Ed25519 and Ed448
implementations, including ph and ctx variants.
Tests are added with test_evp stanzas.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24975)
The options in fipsprov.c are now generated using macros with fips_indicator_params.inc.
This should keep the naming consistent.
Some FIPS related headers have moved to providers/fips/include so that
they can use fips_indicator_params.inc.
securitycheck.h now includes fipsindicator.h, and fipsindicator.h includes
fipscommon.h.
fipsinstall.c uses OSSL_PROV_PARAM_ for the configurable FIPS options rather than
using OSSL_PROV_FIPS_PARAM_* as this was confusing as to which one should be used.
fips_names.h just uses aliases now for existing public names.
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25162)
Cleanup + remove a few tests that are not required.
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25222)
This adds a FIPS indicator for KMAC key size.
Note that 112 bits keys are still smaller than the
sizes required to reach 128 bits for KMAC128 and
256 bits for KMAC256
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/25049)
HMAC has been changed to use a FIPS indicator for its key check.
HKDF and Single Step use a salt rather than a key when using HMAC,
so we need a mechanism to bypass this check in HMAC.
A seperate 'internal' query table has been added to the FIPS provider
for MACS. Giving HMAC a seprate dispatch table allows KDF's to ignore
the key check. If a KDF requires the key check then it must do the
check itself. The normal MAC dipatch table is used if the user fetches
HMAC directly.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/25049)
Also build it in the FIPS provider too and properly
report error on insert when hashtable cannot be grown.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/24504)
(in the code, "sigalg" is used to refer to these composite algorithms,
which is a nod to libcrypto and libssl, where that term is commonly used
for composite algorithms)
To make this implementation possible, wrappers were added around the hash
function itself, allowing the use of existing hash implementations through
their respective OSSL_DISPATCH tables, but also retaining the dynamic fetch
of hash implementations when the digest_sign / digest_verify functionality
is used. This wrapper allows implementing the RSA+hash composites through
simple initializer function and a custom OSSL_DISPATCH table for each.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23416)
After reviewing the FIPS 140-3 IG self tests requirements the following
were added:
- TDES Decryption (Not sure why this was missing)
- DH changed to use ffdhe2048 instead of P,Q,G params.
- Signature code has been changed to use a msg rather than a digest as input.
(Since some digests dont provide the one shot API, the EVP_DigestSignFinal and
EVP_DigestVerifyFinal needed to be exposed to the FIPS provider). The
code is now shared between ED and the other key types.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25217)
This is a FIPS 140-3 requirement.
It should not be done as a FIPS indicator.
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25147)
FIPS KAS requires use of ECC CDH.
The EC 'B' and 'K' curves have a cofactor that is not 1, and this
MUST be multiplied by the private key when deriving the shared secret.
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25139)
FIPS providers need to specify identifiable names and versions. Allow
to customize the fips provider name prefix, via VERSION.dat which
already allows to customize version & buildinfo. With this patch
in-place it removes the need of patching code to set customized
provider name.
E.g. echo FIPS_VENDOR=ACME >> VERSION.dat, results in
```
$ OPENSSL_CONF=fips-and-base.cnf ../util/wrap.pl ../apps/openssl list -providers --verbose
Providers:
base
name: OpenSSL Base Provider
version: 3.4.0
status: active
build info: 3.4.0-dev
gettable provider parameters:
name: pointer to a UTF8 encoded string (arbitrary size)
version: pointer to a UTF8 encoded string (arbitrary size)
buildinfo: pointer to a UTF8 encoded string (arbitrary size)
status: integer (arbitrary size)
fips
name: ACME FIPS Provider for OpenSSL
version: 3.4.0
status: active
build info: 3.4.0-dev
gettable provider parameters:
name: pointer to a UTF8 encoded string (arbitrary size)
version: pointer to a UTF8 encoded string (arbitrary size)
buildinfo: pointer to a UTF8 encoded string (arbitrary size)
status: integer (arbitrary size)
security-checks: integer (arbitrary size)
tls1-prf-ems-check: integer (arbitrary size)
drbg-no-trunc-md: integer (arbitrary size)
```
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24368)
See FIPS 140-3 IG Section 10.3.A Part 11
Indicates ECDSA requires a sign and verify test.
Note 11 states that HashEdDSA is not required to be tested if PureEdDSA is tested.
Note 12 indicates that both ED25519 and X448 need to be tested.
Since ED uses the oneshot interface, additional API's needed to be exposed to the
FIPS provider using #ifdef FIPS_MODULE.
Changed ED25518 and ED448 to use fips=true in the FIPS provider.
Updated documentation for provider lists for EDDSA.
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22112)
Using this option disables the OpenSSL FIPS provider
self tests.
This is intended for debugging purposes only,
as it breaks FIPS compliance.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25063)
Since FIPS provider performs lower bound check by default from v3.0, the
default value for new configurable item will be one.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24120)
In FIPS 140-3, RSA Signing with X9.31 padding is not approved,
but verification is allowed for legacy purposes. An indicator has been added
for RSA signing with X9.31 padding.
A strict restriction on the size of the RSA modulus has been added
i.e. It must be 1024 + 256 * s (which is part of the ANSI X9.31 spec).
Added implementation comments to the X9.31 padding code
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/24021)
This leaves 3DES with the FIPS query "FIPS=yes", which allows
Triple-DES to be used for Decryption by default.
Disallow CMAC using Triple-DES in FIPS.
This does not use a FIPS indicator.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/24960)
This is a FIPS 140-3 requirement.
This uses a FIP indicator if either the FIPS configurable "dsa_sign_disabled" is set to 0,
OR OSSL_SIGNATURE_PARAM_FIPS_SIGN_CHECK is set to 0 in the dsa signing context.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24799)
Found by running the checkpatch.pl Linux script to enforce coding style.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22097)
The `memset(3)` just happened to work because 2s complement.
This is more robust.
Also reduced the size of the indicator structure.
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24923)
Each provider algorithm context can use these helpers to add indicator
support.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24623)
Add a FIPS indicator callback that can be set via
OSSL_INDICATOR_set_callback(). This callback is intended to be run
whenever a non approved algorithm check has occurred and strict checking
has been disabled.The callback may be used to
log non approved algorithms. The callback is passed a type and
description string as well as the cbarg specified in OSSL_INDICATOR_set_callback.
The return value can be either 0 or 1.
A value of 0 can be used for testing purposes to force an error to occur from the algorithm
that called the callback.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24623)
Once RNG is used, triggering FIPS on-demand self tests (via
OSSL_PROVIDER_self_test() API) crashes the application. This happens because the
RNG context is stored before self tests, and restored after their execution.
In the meantime - before context restoration - RAND_set0_private() function is
called, which decrements the stored RNG context reference counter and frees it.
To resolve the issue, the stored RNG context refcount has been incremented via
the EVP_RAND_CTX_up_ref() API to avoid its deallocation during the RNG context
switch performed by the self test function.
The provider_status_test test has been updated to reproduce the issue as
a regression test.
Signed-off-by: Karol Brzuskiewicz <kabr@arista.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24599)
Fixes: #23979
Previously fips module relied on OPENSSL_cpuid_setup
being used as constructor by the linker to correctly
setup the capability vector, either via .section .init
(for x86_64) or via __attribute__((constructor)).
This would make ld.so call OPENSSL_cpuid_setup before
the init function for fips module. However, this early
constructing behavior has several disadvantages:
1. Not all platform/toolchain supports such behavior
2. Initialisation sequence is not well defined, and
some function might not be initialized when cpuid_setup
is called
3. Implicit path is hard to maintain and debug
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24419)
Reviewed-by: Neil Horman <nhorman@openssl.org>
Release: yes
(cherry picked from commit 0ce7d1f355)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24034)
According to NIST SP 800-131Ar2 section 8, the length of the
key-derivation key shall be at least 112 bits.
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23833)
We were neglecting to register the main thread to receive thread stop
notifications. This is important if the thread that starts the FIPS
provider is not the same one that is used when OPENSSL_cleanup() is
called.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21964)
Rather than instantiate the private and primary DRBGs during the
selftest, instead use a test RNG. This leaves the DRBG setup
pristine and permits later replacement of the seed source despite
the very early running power up self tests.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21964)
