Because decoders are coupled with keymgmts from the same provider,
ours need to produce provider side keys the same way. Since our
keymgmts create key data with the provider library context, so must
our decoders.
We solve with functions to adjust the library context of decoded keys,
and use them.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13661)
When OpenSSL is configured with 'no-dh', 'no-dsa' and 'no-ec'
combined, some static functions have no use, which the compiler may
complain about. We therefore add extra guards to silence it.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13589)
EVP_PKEY_CTX_set_dh_ functions were only available when DH was enabled
('no-dsa' not configured). However, that makes it impossible to use
these functions with an engine or a provider that happens to implement
DH. This change solves that problem by shuffling these functions to
more appropriate places.
By consequence, there are a number of places where we can remove the
check of OPENSSL_NO_DH. This requires some re-arrangements of
internal tables to translate between numeric identities and names.
Partially fixes#13550
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13589)
This allows 15-test_rsa.t to succeed, and provides the same OSSL_ENCODER
support for these formats as for all other formats supported in OpenSSL.
Fixes#13379
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13645)
The initial thought was that only CS1 mode (the NIST variant) was allowed.
The lab has asked if these other modes should be included.
The algorithm form indicates that these are able to be validated.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13639)
The OPENSSL_NO_RC4 guard remain around protected PVK tests in
test/endecoder_test.c.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13648)
This satisfies EVP's RAND layer.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13640)
This allows the operating system sources that OpenSSL supports to be
used directly as RNGs. It also allows DRBG seeding to be explicitly
specified rather than being left to a fall back case.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13455)
This protects us from unwanted GENERATE statements in particular.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/13626)
Fixes#10366
The one place that actually used was in the legacy printing of ecparams.
This has been replaced by the pointtobuf variant.
The ecparam app was using one of these functions - this line has just been
removed as another PR will remove all the code generated lines..
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13294)
Fixes#13422
ecdsa_set_ctx_params() was not setting the digest correctly. The side
effect noted was that the check for sha1 when signing was not being
done in fips mode.
Also fixed the dupctx() so that propq is deep copied.
The usage of the variable 'flag_allow_md' was also copied from the dsa code.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13520)
The X942 KDF had been modified so that it supports all optional fields - not
just the fields used by CMS.
As there are 2 types of KDF for X942 - this has been made a bit clearer
by adding an X942KDF-ASN1 alias. X942KDF-CONCAT has also been added as an
alias of X963KDF.
This work was instigated as a result of the ACVP tests optionally being
able to use keybits for the supp_pubinfo field.
Setting the parameter OSSL_KDF_PARAM_X942_USE_KEYBITS to 0 allows this
to be disabled.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13418)
Fixes#12476
Note this stopped working when ECX was swapped over to using
providers. The ECX_KEY keygen and exchange were converted, but not the ED
signing support.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Patrick Steuer <patrick.steuer@de.ibm.com>
(Merged from https://github.com/openssl/openssl/pull/13508)
Various sections of code assumed that at least one of dh or ec would be
available. We also now also need to handle cases where a provider has
a key exchange algorithm and TLS-GROUP that we don't know about.
Fixes#13536
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13549)
If OPENSSL_SMALL_FOOTPRINT was defined then the CHACHA20-POLY1305
implementation for TLS went down a different codepath that failed to
adjust the payload length to remove the tag.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13513)
Addition using the NULL pointer (even when adding 0) is undefined
behaviour. Recent versions of ubsan are now complaining about this, so
we fix various instances.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13513)
The RC4-MD5 ciphersuites were not removing the length of the MAC when
calculating the length of decrypted TLS data. Since RC4 is a streamed
cipher that doesn't use padding we separate out the concepts of fixed
length TLS data to be removed, and TLS padding.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13378)
We previously updated the block ciphers to know how to remove a TLS
MAC when using Encrypt-then-MAC. We also need to do the same for stream
ciphers.
Fixes#13363
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13378)
By the time the keygen is called the references to strings inside the
gen ctx are floating pointers. A strdup solves this problem.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13432)
These functions are: drbg_enable_locking(), drbg_get_ctx_params(),
drbg_lock(), drbg_set_ctx_params() and drbg_unlock().
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13417)
These are: keccak_kmac_init(), sha3_final(), sha3_init(), sha3_reset() and
sha3_update().
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13417)
These are: prov_crngt_cleanup_entropy(), prov_crngt_get_entropy(),
prov_pool_acquire_entropy(), prov_pool_add_nonce_data(),
prov_rand_drbg_free() and prov_rand_drbg_new().
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13417)
Inside the FIPS module we continue to use FIPS186-4. We prefer FIPS186-2
in the default provider for backwards compatibility reasons.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13228)
The documentation claimed this was already the default but it wasn't. This
was causing the dhparam application to change behaviour when compared to
1.1.1
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13228)
getentropy shows up wrongly as weak symbol whereas there is no support.
However NetBSD 10.0 will support getrandom.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13408)
Fixes#12627
Changed security check for DSA verification to match SP800-131Ar2 when
the security strength is < 112.
Fixed compilation error when using config opt 'no-fips-securitychecks'
Removed TODO's from 20-test_cli_fips.t - there is no longer an TODO error.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13387)
getentropy call is not supported however getrandom since the 5.7.x branch is.
current LTS stable is 5.8.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13375)
Refactor them into inline ossl_ends_with_dirsep function in
internal/cryptlib.h.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13306)
The base functionality to implement the keypair encoders doesn't
change much, but this results in a more massive amount of
OSSL_DISPATCH and OSSL_ALGORITHM arrays, to support a fine grained
selection of implementation based on what parts of the keypair
structure (combinations of key parameters, public key and private key)
should be output, the output type ("TEXT", "DER" or "PEM") and the
outermost output structure ("pkcs8", "SubjectPublicKeyInfo", key
type specific structures, ...).
We add support for the generic structure name "type-specific", to
allow selecting that without knowing the exact name of that structure.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13167)
