Lock the buffers used for throughput measurements into memory. This removes
some side effects of paging.
Errors from the memory locking functions are ignored since they are not
critical to the application.
This feature is limited to Linux and Windows.
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19091)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19040)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19257)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18838)
Also add internal functionality to get a QUIC_CONNECTION pointer from
an SSL pointer, and setters / getters for the GQX and ACKM fields.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18838)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19240)
The code is derived from @sftcd's work in PR #17172.
This PR puts the DHKEM algorithms into the provider layer as
KEM algorithms for EC and ECX.
This PR only implements the DHKEM component of HPKE as specified in
RFC 9180.
crypto/hpke/hpke_util.c has been added for fuctions that will
be shared between DHKEM and HPKE.
API's for EVP_PKEY_auth_encapsulate_init() and EVP_PKEY_auth_decapsulate_init()
have been added to support authenticated encapsulation. auth_init() functions
were chosen rather that a EVP_PKEY_KEM_set_auth() interface to support
future algorithms that could possibly need different init functions.
Internal code has been refactored, so that it can be shared between the DHKEM
and other systems. Since DHKEM operates on low level keys it needs to be
able to do low level ECDH and ECXDH calls without converting the keys
back into EVP_PKEY/EVP_PKEY_CTX form. See ossl_ecx_compute_key(),
ossl_ec_public_from_private()
DHKEM requires API's to derive a key using a seed (IKM). This did not sit
well inside the DHKEM itself as dispatch functions. This functionality
fits better inside the EC and ECX keymanagers keygen, since
they are just variations of keygen where the private key is generated
in a different manner. This should mainly be used for testing purposes.
See ossl_ec_generate_key_dhkem().
It supports this by allowing a settable param to be passed to keygen
(See OSSL_PKEY_PARAM_DHKEM_IKM).
The keygen calls code within ec and ecx dhkem implementation to handle this.
See ossl_ecx_dhkem_derive_private() and ossl_ec_dhkem_derive_private().
These 2 functions are also used by the EC/ECX DHKEM implementations to generate
the sender ephemeral keys.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19068)
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19239)
Also add related references to FR #15725.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18900)
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19234)
X509_STORE_load_locations_ex() calls X509_STORE_load_file_ex() and X509_STORE_load_path(), there's no such function name as X509_STORE_load_dir().
CLA: trivial
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19202)
Some of the recently added functions were not documents. This has been addressed.
Also added utility functions for conversions between time_t, seconds and struct timeval
to/from OSSL_TIME.
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19082)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18434)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18434)
These list can be embedded into structures and structures can be members of
multiple lists. Moreover, this is done without dynamic memory allocation.
That is, this is legal:
typedef struct item_st ITEM;
struct item_st {
...
OSSL_LIST_MEMBER(new_items, ITEM);
OSSL_LIST_MEMBER(failed_items, ITEM);
...
};
DEFINE_LIST_OF(new_items, TESTL);
DEFINE_LIST_OF(failed_items, TESTL);
struct {
...
OSSL_LIST(new_items) new;
OSSL_LIST(failed_items) failed;
...
} *st;
ITEM *p;
for (p = ossl_list_new_items_head(&st->new); p != NULL;
p = ossl_list_new_items_next(p))
/* do something */
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19115)
Also change B< to I< in {CMS,PKCS7}_verify.pod, PKCS7_sign{,_add_signer}.pod
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18915)
This limit was increased with 20c2876f24 ("Increase
HKDF_MAXBUF from 1024 to 2048").
CLA: trivial
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19085)
This is the initial implementation of the ACK Manager for OpenSSL's QUIC
support, with supporting design documentation and tests.
Because the ACK Manager also depends on the Statistics Manager, it is
also implemented here. The Statistics Manager is quite simple, so this
does not amount to a large amount of extra code.
Because the ACK Manager depends on a congestion controller, it adds a
no-op congestion controller, which uses the previously workshopped
congestion control API.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18676)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18929)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18930)
Also constify X509_REQ_get0_pubkey() and X509_REQ_check_private_key().
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18930)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18931)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18675)
PR #19031 updated options that that were listed as commands, these
options were already in openssl-list.pod.in, so they are redundant
in openssl.pod.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19044)
Other very similar functions were documented, but this one was missing.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18974)
Code signing certificates have other properties as for example described in
CA Browser Forum documents. This leads to "unsupported certificate purpose" errors when
verifying signed objects.
This patch adds the purpose "codesign" to the table in X.509 certificate verification and
the verification parameter "code_sign" to X509_VERIFY_PARAM.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18567)
Also clarify that EVP_PKEY_fromdata ignores parameters that
are unknown or incorrect for given selection.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18902)
The same-ish module as the TX packetizer, handling the opposite direction.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18610)
Fixes#18586
In order to not break existing applications the OpenSSL documentation
related to SHAKE has been updated.
Background:
All digests algorithms (including XOF's) use the bitlen as the default output length.
This results in a security strength of bitlen / 2.
This means that SHAKE128 will by default have an output length of 16
bytes and a security strength of 64 bits.
For SHAKE256 the default output length is 32 bytes and has a security
strength of 128 bits.
This behaviour was present in 1.1.1 and has been duplicated in the
provider SHAKE algorithms for 3.0.
The SHAKE XOF algorithms have a security strength of
min(bitlen, output xof length in bits / 2).
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18622)
The documentation was misleading in that it suggests that this environment
variable will record information about all allocations. While this is true
it doesn't record the most useful information that you might expect such
as the requested size of the allocation! It is mainly for use in
conjunction with OPENSSL_MALLOC_FAILURES, and reports information about
what chance an allocation has of failing.
We also clarify that the mem_debug functions are actually no-ops in 3.0.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18967)
This prevents misuses creeping in.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18882)
The rest of the documentation talks about sig, not sigret
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18943)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18925)
Updates the docs to describe EC_KEY_set_private_key() function behavior
when a NULL priv_key argument is passed.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/18942)
