... after it was broken for almost 5 years,
since the first 1.1.1 release.
Note: The last working version was 1.1.0l release.
Fixes#20073
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20146)
On NetBSD the device node is essentially always present, but these
days it's mostly not useful except for testing the kernel crypto
stack since the cost of CPU crypto has gone down much faster than the
cost of I/O to external crypto engines. So on most systems it is
disabled in a way that makes open fail with ENXIO. NetBSD has had
this warning for ENXIO patched away for years.
CLA: trivial
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20636)
Byte swapping code incorrectly uses the number of AES rounds to swap expanded
AES key, while swapping only a single dword in a loop, resulting in swapped
key and partially swapped expanded keys, breaking AES encryption and
decryption on VIA Padlock hardware.
This commit correctly sets the number of swapping loops to be done.
Fixes#20073
CLA: trivial
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20077)
And so clean a few useless includes
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19721)
Implement the AES-256-CTR cipher in the dasync engine.
Use that to reproduce the reported problems with the
devcrypto engine in our normal test environment.
See #17995 and #17532 for details.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19386)
If the kernel operation failed the EVP functions
just returned without any error message.
This commit adds them.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19289)
Mostly revamped from #16712
- fall thru -> fall through
- time stamp -> timestamp
- host name -> hostname
- ipv6 -> IPv6
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19059)
Engines lacked the possibility to refer to themselves in this form:
WHATEVERerr(WHATEVER_F_SOMETHING, WHATEVER_R_WHATEVER_LIB);
This little change makes that possible, and gets used in e_capi.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19301)
Since OPENSSL_malloc() and friends report ERR_R_MALLOC_FAILURE, and
at least handle the file name and line number they are called from,
there's no need to report ERR_R_MALLOC_FAILURE where they are called
directly, or when SSLfatal() and RLAYERfatal() is used, the reason
`ERR_R_MALLOC_FAILURE` is changed to `ERR_R_CRYPTO_LIB`.
There were a number of places where `ERR_R_MALLOC_FAILURE` was reported
even though it was a function from a different sub-system that was
called. Those places are changed to report ERR_R_{lib}_LIB, where
{lib} is the name of that sub-system.
Some of them are tricky to get right, as we have a lot of functions
that belong in the ASN1 sub-system, and all the `sk_` calls or from
the CRYPTO sub-system.
Some extra adaptation was necessary where there were custom OPENSSL_malloc()
wrappers, and some bugs are fixed alongside these changes.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19301)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/18424)
Rename x86-32 assembly files from .s to .S. While processing the .S file
gcc will use the pre-processor whic will evaluate macros and ifdef. This
is turn will be used to enable the endbr32 opcode based on the __CET__
define.
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18353)
Including e_os.h with a path from a header file doesn't work well on
certain exotic platform. It simply fails to build.
Since we don't seem to be able to stop ourselves, the better move is
to move e_os.h to an include directory that's part of the inclusion
path given to the compiler.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17641)
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17528)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16918)
Ciphers in the daysnc engine were failing to copy their context properly
in the event of EVP_CIPHER_CTX_copy() because they did not define the
flag EVP_CIPH_CUSTOM_FLAG
Fixes#16844
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16846)
This replaces the AES-128-CBC-HMAC-SHA1 cipher with a
non-encrypting version for use the test suite.
[extended tests]
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16693)
The engine is modifying memory without the sanitiser realising. By pre-
initialising this memory, the sanitiser now thinks that read accesses are okay.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/15952)
For functions that exist in 1.1.1 provide a simple aliases via #define.
Fixes#15236
Functions with OSSL_DECODER_, OSSL_ENCODER_, OSSL_STORE_LOADER_,
EVP_KEYEXCH_, EVP_KEM_, EVP_ASYM_CIPHER_, EVP_SIGNATURE_,
EVP_KEYMGMT_, EVP_RAND_, EVP_MAC_, EVP_KDF_, EVP_PKEY_,
EVP_MD_, and EVP_CIPHER_ prefixes are renamed.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15405)
CLA: trivial
Signed-off-by: Sven Schwermer <sven.schwermer@disruptive-technologies.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15495)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15316)
In function try_decode_PKCS8Encrypted, p8 is freed via X509_SIG_free() at line 481.
If function new_EMBEDDED() returns a null pointer at line 483, the execution will goto nop8.
In the nop8 branch, p8 is freed again at line 491.
Bug reported by @Yunlongs
Fixes#14915
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14921)
Add a "where did this EVP_{CIPHER,MD} come from" flag: global, via fetch,
or via EVP_{CIPHER,MD}_meth_new. Update EVP_{CIPHER,MD}_free to handle all
three origins. The flag is deliberately right before some function pointers,
so that compile-time failures (int/pointer) will occur, as opposed to
taking a bit in the existing "flags" field. The "global variable" flag
is non-zero, so the default case of using OPENSSL_zalloc (for provider
ciphers), will do the right thing. Ref-counting is a no-op for
Make up_ref no-op for global MD and CIPHER objects
Deprecate EVP_MD_CTX_md(). Added EVP_MD_CTX_get0_md() (same semantics as
the deprecated function) and EVP_MD_CTX_get1_md(). Likewise, deprecate
EVP_CIPHER_CTX_cipher() in favor of EVP_CIPHER_CTX_get0_cipher(), and add
EVP_CIPHER_CTX_get1_CIPHER().
Refactor EVP_MD_free() and EVP_MD_meth_free() to call new common
evp_md_free_int() function.
Refactor EVP_CIPHER_free() and EVP_CIPHER_meth_free() to call new common
evp_cipher_free_int() function.
Also change some flags tests to explicit test == or != zero. E.g.,
if (flags & x) --> if ((flags & x) != 0)
if (!(flags & x)) --> if ((flags & x) == 0)
Only done for those lines where "get0_cipher" calls were made.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14193)
This is a fixup for the original commit 5b5e2985f3
"Add support for io_pgetevents_time64 syscall" that didn't correctly
work for 32-bit architecutres with a 64-bit time_t that aren't RISC-V.
For a full discussion of the issue see:
5b5e2985f3
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14432)
FreeBSD's /dev/crypto does not provide a CIOCGSESSINFO ioctl, but it
does provide other ioctls that can be used to provide similar
functionality.
First, FreeBSD's /dev/crypto defines a CIOCGESSION2 ioctl which accepts
a 'struct session2_op'. This structure extends 'struct session_op'
with a 'crid' member which can be used to either request an individual
driver by id, or a class of drivers via flags.
To determine if the available drivers for a given algorithm are
accelerated or not, use CIOCGESSION2 to first attempt to create an
accelerated (hardware) session. If that fails, fall back to
attempting a software session. In addition, when requesting a new
cipher session, use the current setting of the 'use_softdrivers' flag
to determine the value assigned to 'crid' when invoking CIOCGSESSION2.
Finally, use the returned 'crid' value from CIOCGSESSION2 to look up
the name of the associated driver via the CIOCFINDDEV ioctl.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/13468)
FreeBSD's current /dev/crypto implementation requires that consumers
clone a separate file descriptor via the CRIOGET ioctl that can then
be used with other ioctls such as CIOCGSESSION.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/13468)
