Stitched ciphersuites can grow by more during encryption than the code
allowed for. We fix the calculation and add an assert to check we go it
right.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19516)
|uclen| is created from three byte values, so this seems a bit
redundant, but if it makes coverity happy
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19519)
During read pipelining we must ensure that the buffer is sufficiently large
to read enough data to fill our pipelines. We also remove some code that
moved data to the start of the packet if we can. This was unnecessary
because of later code which would end up moving it anyway. The earlier move
was also incorrect in the case that |clearold| was 0. This would cause the
read pipelining code to fail with sufficiently large records.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19456)
The pipeline input/output buf arrays must remain accessible to the
EVP_CIPHER_CTX until EVP_Cipher is subsequently called. This fixes an
asan error discovered by the newly added pipeline test.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19456)
TLS pipelining provides the ability for libssl to read or write multiple
records in parallel. It requires special ciphers to do this, and there are
currently no built-in ciphers that provide this capability. However, the
dasync engine does have such a cipher, so we add a test for this capability
using that engine.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19456)
Remove two function pointers from the OSSL_RECORD_METHOD. Those functions
were no-ops and were never called.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19472)
If rule_str ended in a "-", "l" was incremented one byte past the
end of the buffer. This resulted in an out-of-bounds read when "l"
is dereferenced at the end of the loop. It is safest to just return
early in this case since the condition occurs inside a nested loop.
CLA: trivial
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19166)
The re-occuring surprise is that in Win32, size_t is 32 bits...
Fixed by changing size_t to uint64_t in QUIC_CC
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19345)
This test was disabled during the record write record layer refactor.
We can now enable it again.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19470)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19464)
This partially reverts commit 30eba7f359.
This is legitimate use of the stack functions and no error
should be reported apart from the NULL return value.
Fixes#19389
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19400)
Calling SSL_free() will call BIO_free_all() on the rbio and wbio. We
keep references to the rbio and wbio inside the record layer object.
References to that object are held directly, as well as in fragment
retransmission queues. We need to ensure all record layer objects are
cleaned up before we call BIO_free_all() on rbio/wbio - otherwise the
"top" BIO may not have its reference count drop to 0 when BIO_free_all()
is called. This means that the rest of the BIOs in the chain don't get
freed and a memory leak can occur.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19424)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19424)
We no longer use the old buffer management code now that it has all been
moved to the new record layer.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19424)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19424)
The dtls_write_records function, after the previous series of commits,
was functionally equivalent to tls_write_records_default - so it can be
removed completely.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19424)
This change make dtls_write_records virtuall the same as
tls_write_records_default, which will enable us to merge them in a
subsequent commit.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19424)
We already set the record type on the SSL3_RECORD structure. We don't
need to do it again (inconsistently).
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19424)
The sequence counter was incremented in numerous different ways in
numerous different locations. We introduce a single function to do this
inside the record layer.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19424)
Don't calculate the potential record layer expansion outside of the
record layer. We move some code that was doing that into the record
layer.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19424)
We have standard functions for most of the work that dtls_write_records
does - so we convert it to use those functions instead.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19424)
Previously this was writing to the buffers directly. We use the safer
WPACKET instead
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19424)
In practice this just means have a DTLS specific write_records that the
common tls_write_records() just calls. We also replace the use of
ssl3_write_pending() with tls_retry_write_records().
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19424)
We now use standard record layer return values for this function. We
also convert the code to use RLAYERfatal instead of SSLfatal.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19424)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19424)
At the this stage we just move the code and don't restructure it to do it
the record layer way yet.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19424)
In preparation for moving the DTLS code to use the new write record layer
architecture we first restructure the code to create a dtls_write_records()
function that mirrors the functionality that the record layer will provide.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19424)
do_dtls1_write() was never called with a value for create_empty_fragment
that was ever non-zero - so this is dead code and can be removed. The
equivalent code in the TLS processing is used for TLS1.0/SSLv3 to protect
against known IV weaknesses because those protocol versions do not have
an explicit IV. However DTLS1.0 is based on TLSv1.1 and *does* have an
explicit IV - so this is not useful there.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19424)
size_t-ify the COMP_METHOD structure and functions.
Get rid of the non-functional COMP_METHODS and return NULL instead.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18186)
Fixes#19371
running config with 'enable-sctp' gave compiler errors.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19398)
We should never send or accept a key share group that is not in the
supported groups list or a group that isn't suitable for use in TLSv1.3
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/19317)
This removes some KTLS specific code from tls_retry_write_records().
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19343)
The KTLS code no longer calls this function so this is not necessary.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19343)
For example in this we add the MAC if we are doing encrypt-then-mac.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19343)
This applies any mac that might be necessary, ensures that we have
enough space in the WPACKET to perform the encryption and sets up the
SSL3_RECORD ready for that encryption.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19343)
Only tls13_meth.c needs to handle adding record padding. All other
*_meth.c files can ignore it.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19343)
The KTLS cipher function is a no-op so it doesn't matter if we call it.
We shouldn't special case KTLS in tls_common.c
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19343)
We introduce a new function to prepare the record header. KTLS has its own
version since this is done by the kernel.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19343)
Remove TLSv1.3 specific processing of the record type out of tls_common.c
and into tls13_meth.c
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19343)
We move some protocol specific code for write buffer and WPACKET allocation
and initialisation out of tls_common.c and into the protocol specific files.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19343)
This field was used to track whether a cipher ctx was valid for writing
or not, and also whether we should write out plaintext alerts. With the new
record layer design we no longer need to track whether a cipher ctx is valid
since the whole record layer will be aborted if it is not. Also we have a
different mechanism for tracking whether we should write out plaintext
alerts. Therefore this field is removed from the SSL object.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19343)
Most of this was unnecessary anyway since DTLS isn't using these codepaths.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19343)
We also clean up some of the KTLS code while we are doing it now that all
users of KTLS have been moved to the new write record layer.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19343)
Mostly revamped from #16712
- fall thru -> fall through
- time stamp -> timestamp
- host name -> hostname
- ipv6 -> IPv6
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19059)
Create new TLS_GROUP_ENTRY values for these groups.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/19315)
This partially reverts commit 0a10825a0 in order to reimplement it in a
simpler way in the next commit. The reverted aspects are all related to
the TLSv1.3 brainpool curves in the supported_groups extension. Rather
than special casing the handling of these curves we simply add new entries
to the groups table to represent them. They can then be handled without
any additional special casing. This makes the code simpler to maintain.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/19315)
We also convert to passing COMP_METHOD rather than SSL_COMP to the record
layer. The former is a public type while the latter is internal only - and
the only thing we need from SSL_COMP is the method.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19217)
Since OPENSSL_malloc() and friends report ERR_R_MALLOC_FAILURE, and
at least handle the file name and line number they are called from,
there's no need to report ERR_R_MALLOC_FAILURE where they are called
directly, or when SSLfatal() and RLAYERfatal() is used, the reason
`ERR_R_MALLOC_FAILURE` is changed to `ERR_R_CRYPTO_LIB`.
There were a number of places where `ERR_R_MALLOC_FAILURE` was reported
even though it was a function from a different sub-system that was
called. Those places are changed to report ERR_R_{lib}_LIB, where
{lib} is the name of that sub-system.
Some of them are tricky to get right, as we have a lot of functions
that belong in the ASN1 sub-system, and all the `sk_` calls or from
the CRYPTO sub-system.
Some extra adaptation was necessary where there were custom OPENSSL_malloc()
wrappers, and some bugs are fixed alongside these changes.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19301)
Adding extensions is fragile, with the TLSEXT_TYPE entry needing to be
located at TLSEXT_IDX in the array.
This adds a test to ensure extensions are in the correct order.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19269)
Newly computed traffic secrets are now logged upon key update
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19241)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19040)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18838)
Implements the design doc/designs/quic-design/rx-depacketizer.md.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18838)
Also add internal functionality to get a QUIC_CONNECTION pointer from
an SSL pointer, and setters / getters for the GQX and ACKM fields.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18838)
Make sure we free the record layer before we free the connection BIOs
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19198)
Move the multiblock code into a separate file and introduce the usage of
record_functions_st for some write functions.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19198)
We use the returned data to decide how to split the data we want to write
into records.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19198)
This also means we can convert SSLfatal calls to RLAYERfatal
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19198)
There were a small number of references to the SSL_CONNECTION that can
be removed easily and replaced with record layer equivalents.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19198)
Previously we were referencing the block_padding value through the
SSL_CONNECTION. Now it is held within OSSL_RECORD_LAYER.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19198)
We wrap the callback and pass it to the record layer via the dispatch
array, in order to avoid accessing it directly via SSL_CONNECTION.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19198)
In all cases we should be able to replace this with a simple check
against rl->version.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19198)
This flag can now be managed entirely by the new record layer code so we
move it into ossl_record_layer_st.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19198)
Now that we are no longer recursively addinng the prefix record this
doesn't seem necessary any more. We always add it every time we do
tls_write_records.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19198)
This calculation is based on lots of information from state machine and
elsewhere that the record layer cannot access. In reality it is sufficient
to simply tell the record layer what version to use.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19198)
We retain a numwpipes for now in the old record layer structure for use
by DTLS. This will eventually be removed when DTLS moves over to the new
way of doing things.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19198)
We use the record layer reference to the BIO rather than the SSL object
reference. This removes an unneeded SSL object usage.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19198)
This removes unnecessary usage of the SSL object from the record layer.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19198)
This isn't a record layer responsibility so should be removed from
write_records.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19198)
Make sure we set the write record layer method and create the object
where appropriate. Move the newly restructured writing code into the
record layer object.
For now we are cheating and still accessing the underlying SSL_CONNECTION
object. This will be removed in subsequent commits.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19198)
The new write record layer architecture splits record writing into
a "write_records" call and a "retry_write_records" call - where multiple
records can be sent to "write_records" in one go. We restructure the code
into that format in order that future commits can move these functions into
the new record layer more easily.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19198)
If we receive a ClientHello and send back a HelloVerifyRequest, we need
to be able to handle the scenario where the HelloVerifyRequest gets lost
and we receive another ClientHello with the message sequence number set to
0.
Fixes#18635
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18654)
Construction return values are no longer boolean but can return 3 different
values, so we use an enum to represent them.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18990)
If we can't construct the ticket don't send one. This requires a change
to the TLS state machine to be able to a handle a construction function
deciding not to send a message after all.
Fixes#18977
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18990)
Doing so, had to fix sloppiness in using the stack API in crypto/conf/conf_def.c,
ssl/ssl_ciph.c, ssl/statem/statem_srvr.c, and mostly in test/helpers/ssltestlib.c.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18918)
We automatically dropped Initial keys when receiving a Handshake packet,
but did this regardless of whether the packet was successfully decrypted
and authenticated. Per the RFC, we should only drop Initial keys when
successfully processing a Handshake packet.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19176)
Keep building it for libssl without exposing any symbols.
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19082)
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19082)
This is instead of time_t and struct timeval. Some public APIs mandate a
presence of these two types, but they are converted to OSSL_TIME internally.
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19082)
Some of the recently added functions were not documents. This has been addressed.
Also added utility functions for conversions between time_t, seconds and struct timeval
to/from OSSL_TIME.
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19082)
Use a single definiton for protocol string defintions.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19122)
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19126)
- Adds an RX time field to the OSSL_QRX_PKT structure.
- Adds a timekeeping argument to ossl_demux_new which is used to determine
packet reception time.
- Adds a decoded PN field to the OSSL_QRX_PKT structure.
This has to be decoded by the QRX anyway, and its omission was an oversight.
- Key update support for the TX side.
- Minor refactoring.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18949)
Leak sanitizer reports following leak for ssl-test-new subtest
4-tlsv1_2-both-compress:
==335733==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 17728 byte(s) in 1 object(s) allocated from:
#0 0x3ff9fbba251 in malloc (/usr/lib64/libasan.so.8+0xba251)
#1 0x3ff9f71744f in tls_do_uncompress ssl/record/methods/tls_common.c:868
#2 0x3ff9f7175bd in tls_default_post_process_record ssl/record/methods/tls_common.c:896
#3 0x3ff9f715ee7 in tls_get_more_records ssl/record/methods/tls_common.c:773
#4 0x3ff9f712209 in tls_read_record ssl/record/methods/tls_common.c:958
#5 0x3ff9f6ef73f in ssl3_read_bytes ssl/record/rec_layer_s3.c:1235
#6 0x3ff9f776165 in tls_get_message_header ssl/statem/statem_lib.c:1198
#7 0x3ff9f74709b in read_state_machine ssl/statem/statem.c:624
#8 0x3ff9f74709b in state_machine ssl/statem/statem.c:478
#9 0x3ff9f662e61 in SSL_do_handshake ssl/ssl_lib.c:4430
#10 0x100c55d in do_handshake_step test/helpers/handshake.c:775
#11 0x100c55d in do_connect_step test/helpers/handshake.c:1134
#12 0x100e85b in do_handshake_internal test/helpers/handshake.c:1544
#13 0x1011715 in do_handshake test/helpers/handshake.c:1738
#14 0x101d1a7 in test_handshake test/ssl_test.c:543
#15 0x1027875 in run_tests test/testutil/driver.c:370
#16 0x1008393 in main test/testutil/main.c:30
#17 0x3ff9cc2b871 in __libc_start_call_main (/usr/lib64/libc.so.6+0x2b871)
#18 0x3ff9cc2b94f in __libc_start_main_alias_2 (/usr/lib64/libc.so.6+0x2b94f)
#19 0x100864f (/code/openssl/test/ssl_test+0x100864f)
Direct leak of 17728 byte(s) in 1 object(s) allocated from:
#0 0x3ff9fbba251 in malloc (/usr/lib64/libasan.so.8+0xba251)
#1 0x3ff9f71744f in tls_do_uncompress ssl/record/methods/tls_common.c:868
#2 0x3ff9f7175bd in tls_default_post_process_record ssl/record/methods/tls_common.c:896
#3 0x3ff9f715ee7 in tls_get_more_records ssl/record/methods/tls_common.c:773
#4 0x3ff9f712209 in tls_read_record ssl/record/methods/tls_common.c:958
#5 0x3ff9f6ef73f in ssl3_read_bytes ssl/record/rec_layer_s3.c:1235
#6 0x3ff9f776165 in tls_get_message_header ssl/statem/statem_lib.c:1198
#7 0x3ff9f74709b in read_state_machine ssl/statem/statem.c:624
#8 0x3ff9f74709b in state_machine ssl/statem/statem.c:478
#9 0x3ff9f662e61 in SSL_do_handshake ssl/ssl_lib.c:4430
#10 0x100c55d in do_handshake_step test/helpers/handshake.c:775
#11 0x100c55d in do_connect_step test/helpers/handshake.c:1134
#12 0x1010b09 in do_handshake_internal test/helpers/handshake.c:1550
#13 0x1011715 in do_handshake test/helpers/handshake.c:1738
#14 0x101d1a7 in test_handshake test/ssl_test.c:543
#15 0x1027875 in run_tests test/testutil/driver.c:370
#16 0x1008393 in main test/testutil/main.c:30
#17 0x3ff9cc2b871 in __libc_start_call_main (/usr/lib64/libc.so.6+0x2b871)
#18 0x3ff9cc2b94f in __libc_start_main_alias_2 (/usr/lib64/libc.so.6+0x2b94f)
#19 0x100864f (/code/openssl/test/ssl_test+0x100864f)
SUMMARY: AddressSanitizer: 35456 byte(s) leaked in 2 allocation(s).
Fix this by freeing the SSL3_RECORD structure inside the OSSL_RECORD_LAYER.
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19030)
When a server responds to a second TLSv1.3 ClientHello it is required to
set the legacy_record_version to 0x0303 (TLSv1.2). The client is required
to ignore that field even if it is wrong. The recent changes to the read
record layer in PR #18132 made the record layer stricter and it was
checking that the legacy_record_version was the correct value. This
caused connection failures when talking to buggy servers that set the
wrong legacy_record_version value.
We make us more tolerant again.
Fixes#19051
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19058)
This is the initial implementation of the ACK Manager for OpenSSL's QUIC
support, with supporting design documentation and tests.
Because the ACK Manager also depends on the Statistics Manager, it is
also implemented here. The Statistics Manager is quite simple, so this
does not amount to a large amount of extra code.
Because the ACK Manager depends on a congestion controller, it adds a
no-op congestion controller, which uses the previously workshopped
congestion control API.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18676)
There was a copy & paste error in the definition of the
rlayer_skip_early_data callback. The return type is supposed to
be "int" but it was defined as a pointer type. This was causing
test failures on some platforms.
Fixes#19037
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/19048)
Otherwise ssl3_cipher() cannot work properly.
Fixes Coverity CID 1509401
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19027)
or on record layer that is to be freed anyway.
Fixes Coverity CID 1509402, 1509403
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19027)
Coverity 1508506:
Fixes a bug in the cookie code which would have caused problems for
ten minutes before and after the lower 32 bits of time_t rolled over.
Coverity 1508534 & 1508540:
Avoid problems when the lower 32 bits of time_t roll over by delaying
the cast to integer until after the time delta has been computed.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19004)
The current libssl code always ensures that the callbacks are non-null.
However, the record layer itself wasn't checkthing this. We ensure it does.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
Some minor formatting cleanups and other minor tweaks.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
Some macros were redefined in ssl3_cbc.c. We remove the redefinitions
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
The SSL_AD_NO_ALERT value was defined in two places. We centralise its
definition.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
Once we free the rrl object we should NULL it to prevent a dangling ref
to it. Otherwise we could get a double free.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
Some functions in the record layer were called rlayer_*, but most were
called tls_*. We standardise on the latter.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
The 1 in DTLS1 is confusing and is removed. We also tweak the structure
to always be able to track 64 packets regardless of whether we are on a
32 bit or 64 bit system.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
This file contains design details for the old record layer and is no
longer relevant for the new design.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
The value for epoch was being represented internally via various types:
uint16_t, unsigned short, unsigned int, unsigned long
We standardise on uint16_t
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
The read field is no longer used and can be safely removed.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
We would like the capability for the options/mode/read_ahead settings
to be updateable after the record layer object has been instantiated.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
The tls13encryption is an internal test that reaches inside libssl
to test encryption/decryption of records. It needs to be amended for the
new code structure so that it is testing the equivalent things as before.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
This allows querying of the record layer to get a human readable state
string out. This resolves two outstanding TODO comments and enables us
to remove the rstate variable from s->rlayer.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
This resolves an outstanding "TODO" item.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
If read_ahead data is left over when a record layer closes down, there is
already code present to push into the "next" BIO. So the TODO removed here
is no longer relevant.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
Fields such as rrlmethod and rrl are entirely related to the record layer,
and so should be in that object.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
Now everything has been moved to the record layer the additional check
for setting up the read buffer is not needed and can be removed.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
Now that the read record layer has moved to the new architecture we can
clear some of the old stuff away.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
This also fixes ssl3_pending while we are at it
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
We remove some code outside of the record layer which is no longer
relevant since its functions are now performed by the new record layer
code. This removes a TODO(RECLAYER) as a result.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
Some TODO(RECLAYER) comments are no longer necessary and can be removed.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
We had some temporary function pointers in OSSL_RECORD_METHOD which were
only necessary during the process of refactoring the read record layer.
These are no longer required so can be removed.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
Remove references to dtls1_* and just use dtls_*
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
We add unprocessed DTLS records to the unprocessed record queue. When
the record layer closes down we write the unprocessed records to the
next record layer object.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
Similarly with read_hash and write_hash. In the new model we have a
separate record layer object for reading and writing. Therefore we don't
need to distinguish between reading and writing inside the record layer
object in the encryption and md ctxs.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
Don't use the message callback from the SSL object. Instead we use a
wrapper callback so that the record layer does not need to be aware of the
SSL object.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
This removes some references to the SSL object from the record layer.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
Pass the max fragment length to the record layer when it is applicable
to avoid the need to go through the SSL object.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
We remove the dependency on the SSL object. Instead we check if the
record layer has already set an alert code.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
We no longer have to go through the SSL object to discover whether EtM has
been negotiated.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
Instead we introduce RLAYER_USE_EXPLICIT_IV(). This removes a dependency
on the SSL object.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
Remove SSL_IS_TLS13() and hello_retry_request
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
When validate_record_header() gets called it should be able to rely on
the fact that an SSLv2 record version means that the record was received in
SSLv2 format.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
Sometimes data read by a record layer in one epoch is actually intended for
the next epoch. For example in a TLS with read_ahead, the read_ahead data
could contain a KeyUpdate message followed by application data encrypted
with new keys. Therefore we implement a mechanism for passing this data
across the epochs.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
This also moves other protocol specific code to the protocol specific
files.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
Only done for the read side so far. Still need to do TLS1.3 and SSL3.0.
Also need to separate out KTLS.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
We move the old ssl3_get_record function to conform with the new record
layer design.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
This transfers the low level function ssl3_read_n to the new record layer.
We temporarily make the read_n function a top level record layer function.
Eventually, in later commits in this refactor, we will remove it as a top
level function and it will just be called from read_record.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
It doesn't yet do anything. This is a placeholder which will be filled in
by susbsequent commits.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
Also, rename the "new" function pointer to "new_record_layer" to avoid a
C++ reserved name
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
The same-ish module as the TX packetizer, handling the opposite direction.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18610)
This prevents misuses creeping in.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18882)
Fixes#18690
In some circumstances, it's possible that when using an external
database for the session cache, that pulling in an entry from that
cache to the internal cache will cause the newly added entry to
be deleted from the internal cache. This is likely to happen when
the internal cache is set to have a small size, and the newly added
entry's timeout places it at the end of the cache list.
This could be fixed by updating the timestamp of the session (via
`SSL_SESSION_set_time()` or `SSL_SESSION_set_timeout()`) before
adding to the cache. But that may not be desireable.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18905)
As EVP_CIPHER_CTX_get_iv_length indicates failure with -1, this error
should be processed. Also the result of this function shouldn't be
assigned to an unsigned variable.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18891)
If app data is received before a Finished message in DTLS then we buffer
it to return later. The function SSL_pending() is supposed to tell you
how much processed app data we have already buffered, and SSL_has_pending()
is supposed to tell you if we have any data buffered (whether processed or
not, and whether app data or not).
Neither SSL_pending() or SSL_has_pending() were taking account of this
DTLS specific app data buffer.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18868)
This adds functions for encoding and decoding QUIC frames.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18795)
Make the SSL object polymorphic based on whether this is
a traditional SSL connection, QUIC connection, or later
to be implemented a QUIC stream.
It requires adding if after every SSL_CONNECTION_FROM_SSL() call
which itself has to be added to almost every public SSL_ API call.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18612)
This rather long function used to call BIO_get_ktls_send
mutliple times, although that result cannot change during
the execution of that function.
There was a similar unnecessary call to BIO_get_ktls_recv
in ssl3_get_record.
And while I'm already there, rewrite ssl3_write_bytes
to use BIO_get_ktls_send as a boolean (so using "!" instead
of "== 0").
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18304)
Fix multiple places that could potentially segfault if memory
allocations fail. e.g. ssl_load_ciphers() could fail while calling
ssl_evp_md_fetch().
Found by #18355
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/18784)
As the potential failure of the BN_dup,
it should be better to check the return value
in order to guarantee the success.
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/18699)
- If keymgmmt is not available, it's not an error but the error message
persists in stack
- when setting groups, it's worth saying which group is not available
Fixes#18585
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18591)
