The pkey created in one loop was being fed into the keygen of the next loop - since it was not set to NULL after the
free. This meant that the 2 EVP_MD_CTX objects that still had ref counts to this key were getting confused.
All other tests clear the key after freeing the key if they loop (some do this by declaring/initing the pkey inside the loop).
The offending code is a recent addition to the speed app.
This was found using the -async_jobs option.
Similar code was tried for an RSA key using 111 which resulted in the same issue.
Found while trying to test issue #128867 (It is not known if this will fix that issue yet).
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12975)
Fixes#12635
As discussed in the issue, supporting the set0-like semantics long-term is not necessarily desirable, although necessary for short-term compatibility concerns. So I've deprecated the original method and added an equivalent that is explicitly labelled as set1.
I tried to audit existing usages of the (now-deprecated) API and update them to use set1 if that appeared to align with their expectations.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12917)
Added Keymanager, signatures, kem, asymciphers and keyexchange.
Added -select option so that specific algorithms are easier to view when using -verbose
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12943)
Also improve credentials loading diagnostics for many apps.
Fixes#12840
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12893)
This streamlines with all other config targets, and draws from the
'sys_id' config attribute.
Fixes#12858
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12933)
This allows a user to confirm that the DRBG their configuration specified is
being used.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12931)
The ordering of this option is important so inform the user if they do it incorrectly.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12745)
bugfix: #12872
strncpy here has compiling warning of -Wstringop-truncation, change
into BIO_snprintf as before.
Change-Id: I362872c4ad328cadd4c7a5a5da3165655fa26c0d
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/12889)
In OpenSSL 1.1.1 doing an HMAC operation with (say) SHA1 would produce
output like this:
HMAC-SHA1(README.md)= 553154e4c0109ddc320bb495735906ad7135c2f1
Prior to this change master would instead display this like so:
SHA1(README.md)= 553154e4c0109ddc320bb495735906ad7135c2f1
The problem is that dgst was using EVP_PKEY_asn1_get0_info() to get
the algorithm name from the EVP_PKEY. This doesn't work with provider
based keys. Instead we introduce a new EVP_PKEY_get0_first_alg_name()
function, and an equivalent EVP_KEYMGMT_get0_first_name() function.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12850)
The dgst app was using an undocumented behaviour in the
EVP_PKEY_new_raw_private_key() function when setting a key length for
a MAC. The old EVP_PKEY to MAC bridge, probably by accident, converts a
-1 length to a strlen() call, by virtue of the fact that it eventually
calls ASN1_STRING_set() which has this feature.
As noted above this is undocumented, and unexpected since the len
parameter to EVP_PKEY_new_raw_private_key() is an unsigned value (size_t).
In the old bridge it was later (silently) cast to an int, and therefore
the original -1 value was restored. This only works because sizeof(int) <=
sizeof(size_t). If we ever run on a platform where sizeof(int) >
sizeof(size_t) then it would have failed. The behaviour also doesn't hold
for EVP_PKEY_new_raw_private_key() in general - only when the old MAC
bridge was in use.
Rather than restore the original behaviour I think it is best to simply
fix the dgst app to not assume it exists. We should not bake in this
backwards and inconsistent behaviour.
Fixes#12837
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12850)
We fix 3 problems with safestack:
- Including an openssl header file without linking against libcrypto
can cause compilation failures (even if the app does not otherwise need
to link against libcrypto). See issue #8102
- Recent changes means that applications in no-deprecated builds will need
to include additional macro calls in the source code for all stacks that
they need to use - which is an API break. This changes avoids that
necessity.
- It is not possible to write code using stacks that works in both a
no-deprecated and a normal build of OpenSSL. See issue #12707.
Fixes#12707
Contains a partial fix for #8102. A similar PR will be needed for hash to
fully fix.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12781)
HPE NonStop Port Changes for 3.0.0 Includes unthreaded, PUT, and SPT for OSS.
The port changes include wrapping where necessary for FLOSS and
appropriate configuration changes to support that. Two tests
are excluded as being inappropriate for the platform.
The changes are:
* Added /usr/local/include to nonstop-nsx_spt_floss to load floss.h
* Added SPT Floss variant for NonStop
* Wrapped FLOSS definitions in OPENSSL_TANDEM_FLOSS to allow selective enablement.
* SPT build configuration for NonStop
* Skip tests not relevant for NonStop
* PUT configuration changes required for NonStop platforms
* Configurations/50-nonstop.conf: updates for TNS/X platform.
* FLOSS instrumentation for HPE NonStop TNS/X and TNS/E platforms.
* Configurations/50-nonstop.conf: modifications for non-PUT TNS/E platform b
* Fix use of DELAY in ssltestlib.c for HPNS.
* Fixed commit merge issues and added floss to http_server.c
CLA: Permission is granted by the author to the OpenSSL team to use these modifications.
Fixes#5087.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12800)
When generating a CRL using the "ca" utility, allow values for the
lastUpdate and nextUpdate fields to be specified using the command line
options -crl_lastupdate and -crl_nextupdate respectively.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12784)
If a path is specified with the -module option it will use this path to load the library when the provider is activated,
instead of also having to set the environment variable OPENSSL_MODULES.
Added a platform specific opt_path_end() function that uses existing functionality used by opt_progname().
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12761)
It turns out that the CONF_modules_load(conf, NULL, 0) call is just wrong.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12817)
* Use strenghtened cert chain building, verifying chain using optional trust store
while making sure that no certificate status (e.g., CRL) checks are done
* Use OSSL_CMP_certConf_cb() by default and move its doc to OSSL_CMP_CTX_new.pod
* Simplify certificate and cert store loading in apps/cmp.c
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12741)
