Fixes nondeterministic failures where BIO_bind would fail on some
platforms.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20856)
Alsoo rename OPK_C_ACCEPT_STREAM to reflect its current behaviour.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20856)
Just like --help is explicitly supported, we should support --version.
This will greatly ease people adopting openssl.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20936)
seq_id must be >= retire_prior_to.
Add negative testcase.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20892)
This is an alternative to #20893
Additionally this fixes also a possible issue in UI_UTIL_read_pw:
When UI_new returns NULL, the result code would still be zero
as if UI_UTIL_read_pw succeeded, but the password buffer is left
uninitialized, with subsequent possible stack corruption or worse.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20957)
We need to get acknowledgement notifications for our STOP_SENDING and
STREAM_RESET frames as this information is needed to know when we can
delete a QUIC_STREAM object.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20765)
Also use accept queue popping by the application as the retirement
event, i.e., as the cue to increase the limit.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20765)
Though the RXFC was designed for stream flow control, its logic
is generic enough to use to control MAX_STREAMS generation.
Control of when _we_ can open streams is already done in a bespoke
fashion and doesn't use a TXFC, however (see
ossl_quic_stream_map_update_state).
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20765)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20832)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20832)
Fixes#20889
There was an incorrect value passed to EC_POINT_point2oct() for the
buffer size of the param passed-in.
Added testcases.
Signed-off-by: Yi Li <yi1.li@intel.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20890)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20848)
Fix a typo that is confusing for newcomers.
CLA: trivial
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20909)
Added coverage test that failed without the change.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19677)
Add more test cases and ensure we test DTLS and QUIC too
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20830)
Signed-off-by: Liu-ErMeng <liuermeng2@huawei.com>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20797)
The logic for handling inconsistent use of -rspin etc., -port, -server,
and -use_mock_srv options proved faulty. This is fixed here, updating and
correcting also the documentation and diagnostics of the involved options.
In particular, the case that -rspin (or -rspout. reqin, -reqout) does not
provide enough message file names was not properly described and handled.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20295)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20762)
Add a new option to the `test' section of SSL test data structure.
This contains a space separated list of version checks, all of which must
pass.
Note that the version checks are as they as because:
- 3.1.0 doesn't have mandatory EMS support, so it can run the old tests.
- 3.1.1 (& later) will have mandatory EMS support, so they can't run them.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20762)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20762)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20762)
The SSL API tests copies fipsmodule.cnf and modifies it. Unfortunately, it
grabbed the wrong instance of this file.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20762)
Fixes#20710
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20745)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20298)
This keeps the interface consistent with other HPKE API's.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20583)
Improves consistency with the QUIC rstream implementation - and improves
the abstraction between the TLS implementation and the abstract record
layer. We should not expect that the TLS implementation should be able to
change the underlying buffer. Future record layers may not expect that.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20404)
We also test SSL_is_dtls(), SSL_is_tls() and SSL_is_quic().
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20650)
Discovered during coverage testing.
Remove unneccesary check when using ossl_dh_get0_params() and
ossl_dsa_get0_params(). These point to addresses and can not fail
for any existing calls.
Make dsa keygen tests only available in the FIPS module - as they are
not used in the default provider.
Change ossl_ffc_set_digest() to return void as it cannot fail.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20359)
Related to #20268
DSA_sign() assumes that the signature passed in is related to DSA_size().
If q is negative then DSA_size() actually fails and returns 0.
A test that tries to allocate the signature buffer using DSA_size() and then
pass it to DSA_sign() will then either.
(1) Have a signature buffer of NULL. In this case it was leaking data
returned via i2d_DSA_SIG.
(2) Cause a seg fault because we created a buffer that was not large
enough to hold the signature. As it already checked zero we also now
check for negative values also.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20553)
Similiar to the issue found in PR #20553 for DSA_sign().
ECDSA_sign() leaked memory if the signature was NULL
when i2d_ECDSA_SIG was called.
Note that this does not affect the higher level EVP
functions as they correctly handle NULL.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20554)
We had a test for a handshake record appearing before epoch change, and
a test for an app data record appearing before Finished - but not one for
the app data record appearing before epoch change.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20628)
Verify that the option produces the correct output in the FIPS configuration
file and that the default is as expected.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/20521)
Add support for the RFC7250 certificate-type extensions.
Alows the use of only private keys for connection (i.e. certs not needed).
Add APIs
Add unit tests
Add documentation
Add s_client/s_server support
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18185)
Test that a valid certificate policy is accepted and that an invalid
certificate policy is rejected. Specifically we are checking that a
leaf certificate with an invalid policy is detected.
Related-to: CVE-2023-0465
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20585)
Add a test to read the EC X,Y coordinates.
Support legacy keys.
Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20535)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19947)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20204)
Fixes a regression from 3.0 from the obj creation refactoring.
Fixes#20555
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20556)
If there is no EC specified, the test won't pass.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/20572)
These trees have pathological properties with respect to building. The small
tree stays within the imposed limit, the large tree doesn't.
The large tree would consume over 150Gb of RAM to process.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/20571)
This is an external test which requires recursive checkout
of the cloudflare-quiche submodule.
We simply run a client against the example quiche-server
serving HTTP/0.9 requests.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20527)
We create "real" sockets for blocking mode so that we can block on them.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20514)
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/20533)
Signed-off-by: Čestmír Kalina <ckalina@redhat.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12256)
Signed-off-by: Čestmír Kalina <ckalina@redhat.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12256)
Signed-off-by: Čestmír Kalina <ckalina@redhat.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12256)
Fixes#19092
The code looks like it was written to work with PBES1.
As it had no tests, this would of then broken when PBES2
was introduced at a later point.
Also added libctx and propq support.
This affects the shroudedkeybag object.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20134)
This checks that the first operation successfully completes even if
context duplication fails. But follwing operations get errors as
if the context was finlised.
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/20375)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19076)
Also remove inconsistent key usages from non-RSA certs.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19076)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20246)
This test isn't supposed to test BIO_bind() itself, so we can be a bit
sloppy and assume that it fails because the attempted binding is not
supported on the platform where this is run. For example, BIO_bind()
fails when it's given an IPv6 address and the platform where this is
run doesn't support that address family.
In a case like this, it's sensible enough to simply skip the test when
BIO_bind() fails.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20449)
Add API calls to avoid copying data when reading
These are ossl_quic_rstream_get_record() and
ossl_quic_rstream_release_record().
Add side storage for the stream frame data.
When there are too many packets referenced by the
receiving stream the function ossl_quic_rstream_move_to_rbuf()
can be called to move the data to a ring buffer.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19794)
If we reject early data then it is normal for decryption operations to
fail. We should ensure there are no spurious errors on the stack in that
case. This adds a test for that scenario.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20401)
v3name_fuzzer build modifications
create 99-test_fuzz_v3name_fuzzer.t
test corpus for cve-2023-0286
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20274)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/20386)
Our tests run so quickly that the ticket age is virtually zero. This may
not show up problems in the age calculations, so we artificially add some
age to the tickets in some runs.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20387)
Coverage testing showed that ossl_ffc_params_fromdata() was not setting
OSSL_PKEY_PARAM_FFC_DIGEST_PROPS.
Adding a negative test also showed that ossl_ffc_params_copy() did not
do a shallow copy of the digest or digest property.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20385)
Fixes#20268
Values such as q=1 or priv=0 caused infinite loops when calling
DSA_sign() without these changes.
There are other cases where bad domain parameters may have caused
infinite loops where the retry counter has been added. The simpler case
of priv=0 also hits this case. q=1 caused an infinite loop in the setup.
The max retry value has been set to an arbitrary value of 8 (it is
unlikely to ever do a single retry for valid values).
The minimum q bits was set to an arbitrary value of 128 (160 is still
used for legacy reasons when using 512 bit keys).
Thanks @guidovranken for detecting this, and @davidben for his
insightful analysis.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20384)
The provider functions OSSL_FUNC_keymgmt_import_types() and
OSSL_FUNC_keymgmt_export_types() do not get the provider context passed.
This makes it difficult for providers to implement these functions unless
its a static implementation returning a truly constant OSSL_PARAM array.
Some providers may have a need to return an OSSL_PARAM array that is
dependent on the provider configuration, or anything else that is contained
in its provider context.
Add extended variants of these functions that get the provider context passed.
The functions should still return a static and constant OSSL_PARAM array, but
may use the provider context to select the array to return dependent on its
context. The returned array must be constant at least until the provider is
unloaded.
Providers can implement only the original functions, or only the extended
functions, or both. Implementing at least one of those functions is required
if also the respective OSSL_FUNC_keymgmt_import() or OSSL_FUNC_keymgmt_export()
function is implemented. If an extended function is available, it is called by
evp_keymgmt_import_types() or evp_keymgmt_export_types(), otherwise the original
function is called.
This makes the code backward compatible. Existing providers will only implement
the original functions, so these functions will continued to be called.
Newer providers can choose to implement the extended functions, and thus can
benefit from the provider context being passed to the implementation.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20255)
Also add checks on failing cert/CRL up_ref calls; improve coding style.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19199)
This checks that all symbols are unique across all public static libraries.
This includes a bit of refacftoring to avoid repeating code too much.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20331)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/19931)
Explain that buffers are over allocated to being with, so a resize is a
logical resize only. Buffer addresses never change.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20030)
Allows tests to check that a given transport error was received by the
server.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20030)
Check that we fail if the server has failed to provide transport params.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20030)
Provide helper functions to listen for TLS handshake messages being sent,
as well as the ability to change the contents of those messages as well as
resizing them.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20030)
We add callbacks so that TLS handshake messages can be modified by the test
framework before they are passed to the handshake hash, possibly encrypted
and written to the network. This enables us to simulate badly behaving
endpoints.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20030)
We enable querying of the termination reason which is useful for tests.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20030)
Provider helper functions to listen for plaintext packets being sent, as
well as the ability to change the contents of those packets as well as
resizing them.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20030)
Also includes helper support to create a QUIC connection inside a test.
We wil use quicfaultstest to deliberately inject faulty datagrams/packets
to test how we handle them.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20030)
The test tries to use DES but that may not be available.
But for the purpose of regression testing CVE-2023-0215
the cipher is not relevant, so we use AES-128 instead.
Fixes#20249
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20276)
Also add corresponding tests and to this end update credentials
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20160)
During key generation RSA, EC and DSA have extra tests that run in FIPS mode
All 3 algorithms have a pairwise test, EC & DSA also run a KAT test.
This test uses the self test callback to force an error
during each of the extra pairwise and KAT tests.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20183)
This test runs the error path for the above function.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20200)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20205)
Avoid including QUIC related stuff in the FIPS sources.
Also avoid including libssl headers in ssl3_cbc.c.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19658)
Note: Internally RSA_sign_ASN1_OCTET_STRING() is used with
RSA signing only when the digest is MDC2,
and RSA_verify_ASN1_OCTET_STRING() is unused.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20220)
The unused and untested internal function ossl_a2ucompare() has been
removed.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/20177)
Two key 3DES only sets two keys and the random generation errors out if fewer
than three keys are required. It shouldn't.
Fixes#20212
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20224)
This tests the handling of PKCS7 signedAndEnveloped type.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Fixes CVE-2023-0217
When attempting to do a BN_Copy of params->p there was no NULL check.
Since BN_copy does not check for NULL this is a NULL reference.
As an aside BN_cmp() does do a NULL check, so there are other checks
that fail because a NULL is passed. A more general check for NULL params
has been added for both FFC public and private key validation instead.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Call PEM_read_bio_ex() and expect a failure. There should be no dangling
ptrs and therefore there should be no double free if we free the ptrs on
error.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Point out that options must be given before the final file/URI arg.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20156)
We cannot dynamically load the legacy provider into an application
that is linked statically to libcrypto as this causes
a double loading of libcrypto (one static and one dynamic) and
on NonStop this leads to a segfault in atexit().
Fixes#17537
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19844)
Fixes#20084
In the 3.0 provider implementation the generic code that handles IV's
only allows a 12 byte IV. Older code intentionally added the ability for
the IV to be truncated.
As this truncation is unsafe, the documentation has been updated to
state that this in no longer allowed. The code has been updated to
produce an error when the iv length is set to any value other than 12.
NOTE: It appears that this additional padding may have originated from the code
which uses a 12 byte IV, that is then passed to CHACHA which zero pads it to 16 bytes.
Note that legacy behaviour in e_chacha20_poly1305.c has not been
updated.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20151)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18704)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18704)
Add the ability to pass the main secret and length, as well as the
digest used for the KDF.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19748)
This is just an internal API for now. Something like this will be made
public API at some point - but it is likely to be based on the provider
interface rather that a direct setting of a METHOD like we do for now.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19748)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19271)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20109)
Test that sending large app data records works correctly.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20085)
To this end, tweak the internal handling of ctx->total_timeout.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19391)
Context parameter OSSL_SIGNATURE_PARAM_NONCE_TYPE can now also be
retrieved for ECDSA and DSA.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20070)
Test included
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20033)
We test with binary input of length 1, length 0, and NULL input with length 0
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20033)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/20023)
Fixes#19718Fixes#19716
Added PKCS12_SAFEBAG_get1_cert_ex(), PKCS12_SAFEBAG_get1_crl_ex() and
ASN1_item_unpack_ex().
parse_bag and parse_bags now use the libctx/propq stored in the P7_CTX.
PKCS12_free() needed to be manually constructed in order to free the propq.
pkcs12_api_test.c changed so that it actually tests the libctx, propq.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19942)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20035)
Otherwise the alloca can cause an exception.
Issue reported by Jiayi Lin.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20005)
These create significant coupling between the QRL tests and the RXDP.
Moreover, the RXDP has no state of its own and is implemented as part of
the QUIC_CHANNEL, ergo it doesn't make that much sense to test it in
isolation.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19703)
