PR #18345 added some code for an event queue. It also added a test for it.
Unfortunately this event queue code has never been used for anything.
Additionally the test was never integrated into a test recipe, so it never
actually gets invoked via "make test". This makes the code entirely dead,
unnecessarily bloats the size of libssl and causes a decrease in our
testing code coverage value.
We remove the dead code.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25100)
If the name is not found in namemap, we need
to try to fetch the algorithm and query the
namemap again.
Fixes#19338
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/24940)
Tests #5738: Introduce a new test to verify that a malformed X509 request with the version field set to version 6 fails either early when reading from data or later when `X509_REQ_verify` is called.
Adding a new test recipe `60-test_x509_req.t`
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24677)
It is not used anywhere else than in tests.
Fixes#22965
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23269)
Early data is time sensitive. We have an approx 8 second allowance between
writing the early data and reading it. If we exceed that time tests will
fail. This can sometimes (rarely) occur in normal CI operation. We can try
and detect this and just ignore the result of such test failures if the test
has taken too long. We assume anything over 7 seconds is too long.
This is a partial fix for #22605
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23966)
Add a some simple API tests for reading, printing, signing
and verifying attribute certificates.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15857)
Create a new hashtable that is more efficient than the existing LHASH_OF
implementation. the new ossl_ht api offers several new features that
improve performance opportunistically
* A more generalized hash function. Currently using fnv1a, provides a
more general hash function, but can still be overridden where needed
* Improved locking and reference counting. This hash table is
internally locked with an RCU lock, and optionally reference counts
elements, allowing for users to not have to create and manage their
own read/write locks
* Lockless operation. The hash table can be configured to operate
locklessly on the read side, improving performance, at the sacrifice
of the ability to grow the hash table or delete elements from it
* A filter function allowing for the retrieval of several elements at a
time matching a given criteria without having to hold a lock
permanently
* a doall_until iterator variant, that allows callers which need to
iterate over the entire hash table until a given condition is met (as
defined by the return value of the iterator callback). This allows
for callers attempting to do expensive cache searches for a small
number of elements to terminate the iteration early, saving cpu cycles
* Dynamic type safety. The hash table provides operations to set and
get data of a specific type without having to define a type at the
instatiation point
* Multiple data type storage. The hash table can store multiple data
types allowing for more flexible usage
* Ubsan safety. Because the API deals with concrete single types
(HT_KEY and HT_VALUE), leaving specific type casting to the call
recipient with dynamic type validation, this implementation is safe
from the ubsan undefined behavior warnings that require additional
thunking on callbacks.
Testing of this new hashtable with an equivalent hash function, I can
observe approximately a 6% performance improvement in the lhash_test
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23671)
Ensure that, with the modulepath setting set in a config field, that we
are able to load a provider from the path relative to OPENSSL_MODULES
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24025)
Fixes#23655
BIO_get_new_index() returns a range of 129..255.
It is set to BIO_TYPE_START (128) initially and is incremented on each
call.
>= 256 is reserved for the class type flags (BIO_TYPE_DESCRIPTOR) so it
should error if it reaches the upper bound.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23732)
When parsing the stable section of a config such as this:
openssl_conf = openssl_init
[openssl_init]
stbl_section = mstbl
[mstbl]
id-tc26 = min
Can lead to a SIGSEGV, as the parsing code doesnt recognize min as a
proper section name without a trailing colon to associate it with a
value. As a result the stack of configuration values has an entry with
a null value in it, which leads to the SIGSEGV in do_tcreate when we
attempt to pass NULL to strtoul.
Fix it by skipping any entry in the config name/value list that has a
null value, prior to passing it to stroul
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22988)
If a malformed config file is provided such as the following:
openssl_conf = openssl_init
[openssl_init]
providers = provider_sect
[provider_sect]
= provider_sect
The config parsing library will crash overflowing the stack, as it
recursively parses the same provider_sect ad nauseum.
Prevent this by maintaing a list of visited nodes as we recurse through
referenced sections, and erroring out in the event we visit any given
section node more than once.
Note, adding the test for this revealed that our diagnostic code
inadvertently pops recorded errors off the error stack because
provider_conf_load returns success even in the event that a
configuration parse failed. The call path to provider_conf_load has been
updated in this commit to address that shortcoming, allowing recorded
errors to be visibile to calling applications.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22898)
Like in #17345, evp_extra_test links libcrypto statically, but also has
a dynamic/shared load via the legacy provider, which leads to ambiguous
behavior in evp_extra_test on some platforms, usually a crash (SIGSEGV)
on exit via the atexit handlers. Statically link the legacy provider to
avoid this.
Fixes#22819
Helped-by: Neil Horman <nhorman@openssl.org>
Helped-by: Tomas Mraz <tomas@openssl.org>
Signed-off-by: Randall S. Becker <randall.becker@nexbridge.ca>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22905)
We test its validity by trying to load it.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/22866)
Fixes#7894
This allows SHAKE to squeeze multiple times with different output sizes.
The existing EVP_DigestFinalXOF() API has been left as a one shot
operation. A similar interface is used by another toolkit.
The low level SHA3_Squeeze() function needed to change slightly so
that it can handle multiple squeezes. This involves changing the
assembler code so that it passes a boolean to indicate whether
the Keccak function should be called on entry.
At the provider level, the squeeze is buffered, so that it only requests
a multiple of the blocksize when SHA3_Squeeze() is called. On the first
call the value is zero, on subsequent calls the value passed is 1.
This PR is derived from the excellent work done by @nmathewson in
https://github.com/openssl/openssl/pull/7921
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21511)
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22499)
We also add a test for BIO_ADDR_dup() which was also added in 3.2
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22164)
Provide a BIO filter that can split QUIC datagrams containing multiple
packets, such that each packet is in its own datagram.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22157)
Create a noisy dgram test that can drop/duplicate/reorder UDP packets and
ensure that the QUIC connection is tolerant of this. At this stage we just
create the outline of the test. Adding in the noise will come in future
commits.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22157)
Fixes#21198
decoder objects were setting propq as NULL.
Added a set_ctx/settable_ctx to all decoders that should supply
a property query parameter to internal functions.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21219)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21135)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21401)
This can effectively reduce the binary size for platforms
that don't need ECX feature(~100KB).
Signed-off-by: Yi Li <yi1.li@intel.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20781)
Added coverage test that failed without the change.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19677)
Add support for the RFC7250 certificate-type extensions.
Alows the use of only private keys for connection (i.e. certs not needed).
Add APIs
Add unit tests
Add documentation
Add s_client/s_server support
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18185)
This is an external test which requires recursive checkout
of the cloudflare-quiche submodule.
We simply run a client against the example quiche-server
serving HTTP/0.9 requests.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20527)
We create "real" sockets for blocking mode so that we can block on them.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20514)
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/20533)
This checks that the first operation successfully completes even if
context duplication fails. But follwing operations get errors as
if the context was finlised.
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/20375)
Also includes helper support to create a QUIC connection inside a test.
We wil use quicfaultstest to deliberately inject faulty datagrams/packets
to test how we handle them.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20030)
During key generation RSA, EC and DSA have extra tests that run in FIPS mode
All 3 algorithms have a pairwise test, EC & DSA also run a KAT test.
This test uses the self test callback to force an error
during each of the extra pairwise and KAT tests.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20183)
