Similiar checks to the DSA code have been added for ECDSA also.
This should not be a problem when using named groups.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20384)
Fixes#20268
Values such as q=1 or priv=0 caused infinite loops when calling
DSA_sign() without these changes.
There are other cases where bad domain parameters may have caused
infinite loops where the retry counter has been added. The simpler case
of priv=0 also hits this case. q=1 caused an infinite loop in the setup.
The max retry value has been set to an arbitrary value of 8 (it is
unlikely to ever do a single retry for valid values).
The minimum q bits was set to an arbitrary value of 128 (160 is still
used for legacy reasons when using 512 bit keys).
Thanks @guidovranken for detecting this, and @davidben for his
insightful analysis.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20384)
If the cipher being used in ossl_cms_EncryptedContent_init_bio() has no
associated OID then we should report an error rather than continuing on
regardless. Continuing on still ends up failing - but later on and with a
more cryptic error message.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19918)
The internal error reason is confusing and indicating an error
in OpenSSL and not a configuration problem.
Fixes#19867
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19875)
Signed-off-by: Čestmír Kalina <ckalina@redhat.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19823)
Do not accept password-based if expected signature-based and no secret is available and
do not accept signature-based if expected password-based and no trust anchors available.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19729)
This supports all the modes, suites and export mechanisms defined
in RFC9180 and should be relatively easily extensible if/as new
suites are added. The APIs are based on the pseudo-code from the
RFC, e.g. OSS_HPKE_encap() roughly maps to SetupBaseS(). External
APIs are defined in include/openssl/hpke.h and documented in
doc/man3/OSSL_HPKE_CTX_new.pod. Tests (test/hpke_test.c) include
verifying a number of the test vectors from the RFC as well as
round-tripping for all the modes and suites. We have demonstrated
interoperability with other HPKE implementations via a fork [1]
that implements TLS Encrypted ClientHello (ECH) which uses HPKE.
@slontis provided huge help in getting this done and this makes
extensive use of the KEM handling code from his PR#19068.
[1] https://github.com/sftcd/openssl/tree/ECH-draft-13c
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17172)
The values don't match those in include/openssl/sslerr.h
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19688)
The recent DTLS write record layer code and the certificate compression
code both added new SSL_R_ reason codes. The numbers are conflicting due
to rebase issues and causing make update to fail.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19457)
The sequence counter was incremented in numerous different ways in
numerous different locations. We introduce a single function to do this
inside the record layer.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19424)
Since OPENSSL_malloc() and friends report ERR_R_MALLOC_FAILURE, and
at least handle the file name and line number they are called from,
there's no need to report ERR_R_MALLOC_FAILURE where they are called
directly, or when SSLfatal() and RLAYERfatal() is used, the reason
`ERR_R_MALLOC_FAILURE` is changed to `ERR_R_CRYPTO_LIB`.
There were a number of places where `ERR_R_MALLOC_FAILURE` was reported
even though it was a function from a different sub-system that was
called. Those places are changed to report ERR_R_{lib}_LIB, where
{lib} is the name of that sub-system.
Some of them are tricky to get right, as we have a lot of functions
that belong in the ASN1 sub-system, and all the `sk_` calls or from
the CRYPTO sub-system.
Some extra adaptation was necessary where there were custom OPENSSL_malloc()
wrappers, and some bugs are fixed alongside these changes.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19301)
Fixes#6251
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/14833)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18931)
We no longer have to go through the SSL object to discover whether EtM has
been negotiated.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
We move the old ssl3_get_record function to conform with the new record
layer design.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
This transfers the low level function ssl3_read_n to the new record layer.
We temporarily make the read_n function a top level record layer function.
Eventually, in later commits in this refactor, we will remove it as a top
level function and it will just be called from read_record.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18132)
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18429)
Even though the function is not part of the public api, it is not
entirely removed, in order to minimize the chance of breakage,
because it is exported from libcrypto. Instead, we keep a dummy
implementation.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17974)
This commit removes the entire initialization and cleanup of the
error string hash table (`int_error_hash`) if `no-err` is configured.
The only operative function remaining is `ERR_get_next_error_library()`.
That is the reason why the `err_string_lock` and hence the
`do_err_strings_init()` function can't be removed entirely.
Fixes#17971
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17974)
CLI changes: New parameter -digest to CLI command openssl cms, to
provide pre-computed digest for use with -sign.
API changes: New function CMS_final_digest(), like CMS_final() but
uses a pre-computed digest instead of computing it from the data.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/15348)
Supports Linux, MacOS and FreeBSD
Disabled by default, enabled via `enabled-tfo`
Some tests
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8692)
Including e_os.h with a path from a header file doesn't work well on
certain exotic platform. It simply fails to build.
Since we don't seem to be able to stop ourselves, the better move is
to move e_os.h to an include directory that's part of the inclusion
path given to the compiler.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17641)
Move them to their own source file, so they end up in a separate
object file. This allows providers to override their implementation
to use the corresponding OSSL_FUNC upcalls without having to
reimplement everything from crypto/err/err.c.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17474)
When the parameter definition has the data type OSSL_PARAM_UNSIGNED_INTEGER,
negative input values should not be accepted.
Fixes#17103
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17104)
Fixes printing generic reason strings, e.g., 'reason(524550)' vs. 'passed an invalid argument'
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17056)
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15790)
An attempt to clear an error with malloced data didn't clear the flags.
Now it clears all flags except the malloced flag.
Fixes#12530
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15667)
The OSSL_DECODER library used to ask each decoder implementation for
certain data in form of parameters to place them correctly in the
decoder chain, if at all. These parameters were duplicates of
properties of those same implementations, and therefore unnecessarily
redundant.
Now that we have functionality to query property definition values,
those duplicates are no longer needed, and are therefore not looked at
any more.
This adds the "global" error reason ERR_R_INVALID_PROPERTY_DEFINITION,
which can be re-used elsewhere.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15570)
