Using a cert with Cyrillic characters, kindly supplied by Dmitry Belyavsky
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2943)
Found using various (old-ish) versions of gcc.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2940)
On some platforms, setting stdout to binary mode isn't quite enough,
which makes the result unusable. With -out, we have better control.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2939)
The Boring runner attempts to enable the NULL-SHA ciphersuite using the
cipherstring "DEFAULT:NULL-SHA". However in OpenSSL DEFAULT permanently
switches off NULL ciphersuites, so we fix this up to be "ALL:NULL-SHA"
instead. We can't change the runner so we have to change the shim to
detect this.
(Merged from https://github.com/openssl/openssl/pull/2933)
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
We already test DTLS protocol versions. For good measure, add some
DTLS tests with client auth to the new test framework, so that we can
remove the old tests without losing coverage.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Update the list of suppressions so that we can run a later BoringSSL set
of tests. This also adds an ErrorMap to greatly reduce the number of
failing tests. The remaining tests that still fail are just disabled for
now.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2930)
The boring tests are currently failing because they send a PSK extension
which isn't in the last place. This is not allowed in the latest TLS1.3
specs. However the Boring tests we have are based on an old commit that
pre-date when that rule first appeared.
The proper solution is to update the tests to a later commit. But for now
to get travis to go green we disable the failing tests.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2928)
This will make the individual external tests more easily selectable /
deselectable through the usual test selection mechanism.
This also moves external tests to group 95.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2902)
This allows a finer granularity when selecting which tests to run, and
makes the tests more vidible.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2901)
Examples of possible expressions (adapt to your platform):
make test TESTS=-99
make test TESTS=10
make test TESTS=-9?
make test TESTS=-[89]0
make test TESTS=[89]0
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2887)
process. This means no AEAD ciphers and no XTS mode.
Update the test script that uses this output to test cipher suites to not
filter out the now missing cipher modes.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2876)
The value of SSL3_RT_MAX_ENCRYPTED_LENGTH normally includes the compression
overhead (even if no compression is negotiated for a connection). Except in
a build where no-comp is used the value of SSL3_RT_MAX_ENCRYPTED_LENGTH does
not include the compression overhead.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2872)
We just check that if we insert a cookie into an HRR it gets echoed back
in the subsequent ClientHello.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2839)
Change the early data API so that the server must use
SSL_write_early_data() to write to an unauthenticated client.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2737)
This is for consistency with the rest of the API where all the functions
are called *early_data*.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2737)
This is for consistency with the rest of the API where all the functions
are called *early_data*.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2737)
Don't create a custom boolean type for parsing CompressionExpected. Use
the existing one instead.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2814)
- FLAT_INC
- PKCS1_CHECK (the SSL_OP_PKCS1_CHECK options have been
no-oped)
- PKCS_TESTVECT (debugging leftovers)
- SSL_AD_MISSING_SRP_USERNAME (unfinished feature)
- DTLS_AD_MISSING_HANDSHAKE_MESSAGE (unfinished feature)
- USE_OBJ_MAC (note this removes a define from the public header but
very unlikely someone would be depending on it)
- SSL_FORBID_ENULL
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
AGL has a history of pointing out the idiosynchronies/laxness of the
openssl PEM parser in amusing ways. If we want this functionality to
stay present, we should test that it works.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2756)
Generate a fresh certificate and DSA private key in their respective PEM
files. Modify the resulting ASCII in various ways so as to produce input
files that might be generated by non-openssl programs (openssl always
generates "standard" PEM files, with base64 data in 64-character lines
except for a possible shorter last line).
Exercise various combinations of line lengths, leading/trailing
whitespace, non-base64 characters, comments, and padding, for both
unencrypted and encrypted files. (We do not have any other test coverage
that uses encrypted files, as far as I can see, and the parser enforces
different rules for the body of encrypted files.)
Add a recipe to parse these test files and verify that they contain the
expected string or are rejected, according to the expected status.
Some of the current behavior is perhaps suboptimal and could be revisited.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2756)
This removes the fips configure option. This option is broken as the
required FIPS code is not available.
FIPS_mode() and FIPS_mode_set() are retained for compatibility, but
FIPS_mode() always returns 0, and FIPS_mode_set() can only be used to
turn FIPS mode off.
Reviewed-by: Stephen Henson <steve@openssl.org>
The second loop in the remove_space function doesn't check for walking
back off of the start of the string while setting white space to 0.
This fix exits this loop once the pointer is before the (updated) beginning
of the string.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2752)
Avoid a -Wundef warning in refcount.h
Avoid a -Wundef warning in o_str.c
Avoid a -Wundef warning in testutil.h
Include internal/cryptlib.h before openssl/stack.h
to avoid use of undefined symbol OPENSSL_API_COMPAT.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2712)
Make sure that we can stop handshake processing and resume it later.
Also check that the cipher list and compression methods are sane.
Unfortunately, we don't have the client-side APIs needed to force
a specific (known) session ID to be sent in the ClientHello, so
that accessor cannot be tested here.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)
Certain callback APIs allow the callback to request async processing
by trickling a particular error value up the stack to the application
as an error return from the handshake function. In those cases,
SSL_want() returns a code specific to the type of async processing
needed.
The create_ssl_connection() helper function for the tests is very
helpful for several things, including creating API tests. However,
it does not currently let us test the async processing functionality
of these callback interfaces, because the special SSL error codes
are treated as generic errors and the helper continues to loop until
it reaches its maximum iteration count.
Add a new parameter, 'want', that indicates an expected/desired
special SSL error code, so that the helper will terminate when
either side reports that error, giving control back to the calling
function and allowing the test to proceed.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)
create_ssl_connection() prints out the results if SSL_accept() and/or
SSL_connect() fail, but was reusing the client return value when printing
about SSL_accept() failures.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)
Plumb things through in the same place as the SNI callback, since
we recommend that the early callback replace (and supplement) the
SNI callback, and add a few test cases.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)
TODO(robpercival): Should actually test that the output certificate
contains the poison extension.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/843)
This implementation is written in endian agnostic C code. No attempt
at providing machine specific assembly code has been made. This
implementation expands the evptests by including the test cases from
RFC 5794 and ARIA official site rather than providing an individual
test case. Support for ARIA has been integrated into the command line
applications, but not TLS. Implemented modes are CBC, CFB1, CFB8,
CFB128, CTR, ECB and OFB128.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2337)
On VMS, file names with more than one period get all but the last get
escaped with a ^, so 21-key-update.conf.in becomes 21-key-update^.conf.in
That means that %conf_dependent_tests and %skip become useless unless
we massage the file names that are used as indexes.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2678)
Since 20-cert-select.conf will vary depending in no-dh and no-dsa,
don't check it against original when those options are selected
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2680)
We use an int instead. That means SSL_key_update() also should use an int.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2609)
In 1.1.0 changing the ciphersuite during a renegotiation can result in
a crash leading to a DoS attack. In master this does not occur with TLS
(instead you get an internal error, which is still wrong but not a security
issue) - but the problem still exists in the DTLS code.
The problem is caused by changing the flag indicating whether to use ETM
or not immediately on negotiation of ETM, rather than at CCS. Therefore,
during a renegotiation, if the ETM state is changing (usually due to a
change of ciphersuite), then an error/crash will occur.
Due to the fact that there are separate CCS messages for read and write
we actually now need two flags to determine whether to use ETM or not.
CVE-2017-3733
Reviewed-by: Richard Levitte <levitte@openssl.org>
In 1.1.0 changing the ciphersuite during a renegotiation can result in
a crash leading to a DoS attack. In master this does not occur with TLS
(instead you get an internal error, which is still wrong but not a security
issue) - but the problem still exists in the DTLS code.
This commit provides a test for the issue.
CVE-2017-3733
Reviewed-by: Richard Levitte <levitte@openssl.org>
Make sure we get an HRR in the right circumstances based on kex mode.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2341)
Previously counting the number of tests in checkhandshake.pm took an
initial guess and then modified it based on various known special
cases. That is becoming increasingly untenable, so this changes it to
properly calculate the number of tests we expect to run.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2341)
This happens when a fd is added and then immediately removed from the
ASYNC_WAIT_CTX before pausing the job.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2581)
test/recipes/40-test_rehash.t uses test files from certs/demo, which
doesn't exist any longer. Have it use PEM files from test/ instead.
Because rehash wants only one certificate or CRL per file, we must
also filter those PEM files to produce test files with a single object
each.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2594)
If s->s3->tmp.new_cipher is NULL then a crash can occur. This can happen
if an alert gets sent after version negotiation (i.e. we have selected
TLSv1.3 and ended up in tls13_enc), but before a ciphersuite has been
selected.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2575)
Idea is to keep it last for all eternity, so that if you find yourself
in time-pressed situation and deem that fuzz test can be temporarily
skipped, you can terminate the test suite with less hesitation about
following tests that you would have originally missed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
For TLS 1.3 we select certificates with signature algorithms extension
only. For ECDSA+SHA384 there is the additional restriction that the
curve must be P-384: since the test uses P-256 this should fail.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2339)
The core SipHash supports either 8 or 16-byte output and a configurable
number of rounds.
The default behavior, as added to EVP, is to use 16-byte output and
2,4 rounds, which matches the behavior of most implementations.
There is an EVP_PKEY_CTRL that can control the output size.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2216)
Now that we support internal tests properly, we can test wpacket even in
shared builds.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)
In TLSv1.3 the connection will be created before the session is
established. In OpenSSL we send the NewSessionTicket message immediately
after the client finished has been received. Therefore we change
create_ssl_connection() to attempt a read of application data after the
handshake has completed. We expect this to fail but it will force the
reading of the NewSessionTicket and the session to be set up.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)
Add a client authentication signature algorithm to simple
ssl test and a server signature algorithm. Since we don't
do client auth this should have no effect. However if we
use client auth signature algorithms by mistake this will
abort the handshake with a no shared signature algorithms
error.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2290)
In test/ssl_test, parsing ExpectedClientSignHash ended up in the
expected_server_sign_hash field.
Reviewed-by: Stephen Henson <steve@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2289)
When doing in place encryption the overlapping buffer check can fail
incorrectly where we have done a partial block "Update" operation. This
fixes things to take account of any pending partial blocks.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2275)
The previous commit fixed a bug where a partial block had been passed to
an "Update" function and it wasn't properly handled. We should catch this
type of error in evp_test.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2275)
Add Poly1305 as a "signed" digest.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2128)
It seems that the ssl test 20-cert-select.conf dislikes the lack of TLSv1.2
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2268)
The difference between the AIX MD5 password algorithm and the standard MD5
password algorithm is that in AIX there is no magic string while in the
standard MD5 password algorithm the magic string is "$1$"
Documentation of '-aixmd5' option of 'openssl passwd' command is added.
1 test is added in test/recipes/20-test-passwd.t
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2251)
Add certifcate selection tests: the certificate type is selected by cipher
string and signature algorithm.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2224)
- On VMS, apps/apps.c depends on apps/vms_term_sock.c, so add it to
the build
- On VMS, apps/*.c are compiled with default symbol settings,
i.e. uppercased and truncated symbols, which differs from test
programs. Make sure uitest.c knows that with a few pragmas.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2218)
One of the new tests uses a DH based ciphersuite. That test should be
disabled if DH is disabled.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2217)
It tests both the use of UI_METHOD (through the apps/apps.h API) and
wrapping an older style PEM password callback in a UI_METHOD.
Replace the earlier UI test with a run of this test program
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2204)
Check that signatures actually work, and that an incorrect signature
results in a handshake failure.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)
Previously SKE in TLSProxy only knew about one anonymous ciphersuite so
there was never a signature. Extend that to include a ciphersuite that is
not anonymous. This also fixes a bug where the existing SKE processing was
checking against the wrong anon ciphersuite value. This has a knock on
impact on the sslskewith0p test. The bug meant the test was working...but
entirely by accident!
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)
TLSv1.3 introduces PSS based sigalgs. Offering these in a TLSv1.3 client
implies that the client is prepared to accept these sigalgs even in
TLSv1.2.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)
A misreading of the TLS1.3 spec meant we were using the handshake hashes
up to and including the Client Finished to calculate the client
application traffic secret. We should be only use up until the Server
Finished.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)
Add option ExpectedTmpKeyType to test the temporary key the server
sends is of the correct type.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2191)
We remove the separate CertificateStatus message for TLSv1.3, and instead
send back the response in the appropriate Certificate message extension.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2020)
Also updates TLSProxy to be able to understand the format and parse the
contained extensions.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2020)
BIO_seek and BIO_tell can cause problems with evp_test.c on some platforms.
Avoid them by using a temporary memory BIO to store key PEM data.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2183)
These tests depend on there being at least one protocol version below
TLSv1.3 enabled.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2144)
The CT tests in test_sslmessages require EC to be available, therefore
we must skip these if no-ec
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2153)
The previous commit fixed a bug where the EC point formats extensions did
not appear in the ServerHello. This should have been caught by
70-test_sslmessages but that test never tries an EC ciphersuite. This
updates the test to do that.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2153)
In some cases, both client and server end of the test can end up in
SSL_ERROR_WANT_READ and never get out of it, making the test spin.
Detect it and give up instead of waiting endlessly.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2096)
More importantly, port CRL test from boringSSL crypto/x509/x509_test.cc
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1775)
SSL_clear() was resetting numwpipes to 0, but not freeing any allocated
memory for existing write buffers.
Fixes#2026
Reviewed-by: Rich Salz <rsalz@openssl.org>
Support checking for errors during test initialisation and parsing.
Add errors and tests for key operation initalisation and ctrl errors.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This data directory is formed automatically by taking the recipe name
and changing '.t' to '_data'. Files in there can be reached with the
new function data_file()
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2027)
The indentation was a bit off in some of the perl files following the
extensions refactor.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Move this module into the same place as other test helper modules. It
simplifies the code and keeps like things together.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The external BoringSSL tests had some failures as a result of
the extensions refactor. This was due to a deliberate relaxation
of the duplicate extensions checking code. We now only check
known extensions for duplicates. Unknown extensions are ignored.
This is allowed behaviour, so we suppress those BoringSSL tests.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Ensure the tests can find the checkhandshake module on all platforms
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Check that the extension framework properly handles extensions specific
to a protocol version
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Make sure we did not break the unsafe legacy reneg checks with the extension
work.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The s_server option -status_file has been added so this test can be
enabled.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Repeat for various handshake types
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Extend test_tls13messages to additionally check the expected extensions
under different options given to s_client/s_server.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
In TLS1.3 some ServerHello extensions remain in the ServerHello, while
others move to the EncryptedExtensions message. This commit performs that
move.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
At this stage the message is just empty. We need to fill it in with
extension data.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
There are some minor differences in the format of a ServerHello in TLSv1.3.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The best way to test the UI interface is currently by using an openssl
command that uses password_callback. The only one that does this is
'genrsa'.
Since password_callback uses a UI method derived from UI_OpenSSL(), it
ensures that one gets tested well enough as well.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2040)
Commit b3618f44 added a test for mac-then-encrypt. However the test fails
when running with "enable-tls1_3". The problem is that the test creates a
connection, which ends up being TLSv1.3. However it also restricts the
ciphers to a single mac-then-encrypt ciphersuite that is not TLSv1.3
compatible so the connection aborts and the test fails. Mac-then-encrypt
is not relevant to TLSv1.3, so the test should disable that protocol
version.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Test suite used from boring, written by David Benjamin.
Test driver converted from C++ to C.
Added a Perl program to check the testsuite file.
Extensive review feedback incorporated (thanks folks).
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Verify that the encrypt-then-mac negotiation is handled
correctly. Additionally, when compiled with no-asm, this test ensures
coverage for the constant-time MAC copying code in
ssl3_cbc_copy_mac. The proxy-based CBC padding test covers that as
well but it's nevertheless better to have an explicit handshake test
for mac-then-encrypt.
Reviewed-by: Andy Polyakov <appro@openssl.org>
GH issue #1916 affects only big-endian platforms. TLS is not affected,
because TLS fragment is never big enough.
Reviewed-by: Matt Caswell <matt@openssl.org>
This is a major overhaul of the TLSv1.3 state machine. Currently it still
looks like TLSv1.2. This commit changes things around so that it starts
to look a bit less like TLSv1.2 and bit more like TLSv1.3.
After this commit we have:
ClientHello
+ key_share ---->
ServerHello
+key_share
{CertificateRequest*}
{Certificate*}
{CertificateStatus*}
<---- {Finished}
{Certificate*}
{CertificateVerify*}
{Finished} ---->
[ApplicationData] <---> [Application Data]
Key differences between this intermediate position and the final TLSv1.3
position are:
- No EncryptedExtensions message yet
- No server side CertificateVerify message yet
- CertificateStatus still exists as a separate message
- A number of the messages are still in the TLSv1.2 format
- Still running on the TLSv1.2 record layer
Reviewed-by: Rich Salz <rsalz@openssl.org>
TLSv1.3 has a NewSessionTicket message, but it is *completely* different to
the TLSv1.2 one and may as well have been called something else. This commit
removes the old style NewSessionTicket from TLSv1.3. We will have to add the
new style one back in later.
Reviewed-by: Rich Salz <rsalz@openssl.org>
When configured with "no-mdc2 enable-crypto-mdebug" the evp_test
will leak memory due to skipped tests, and error out.
Also fix a skip condition
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1968)
This gives better code coverage and is more representative of how a
user would likely construct an SCT (using the base64 returned by a CT log).
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1548)
ssl_test_old was reaching inside the SSL structure and changing the internal
BIO values. This is completely unneccessary, and was causing an abort in the
test when enabling TLSv1.3.
I also removed the need for ssl_test_old to include ssl_locl.h. This
required the addition of some missing accessors for SSL_COMP name and id
fields.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The previous commits put in place the logic to exchange key_share data. We
now need to do something with that information. In <= TLSv1.2 the equivalent
of the key_share extension is the ServerKeyExchange and ClientKeyExchange
messages. With key_share those two messages are no longer necessary.
The commit removes the SKE and CKE messages from the TLSv1.3 state machine.
TLSv1.3 is completely different to TLSv1.2 in the messages that it sends
and the transitions that are allowed. Therefore, rather than extend the
existing <=TLS1.2 state transition functions, we create a whole new set for
TLSv1.3. Intially these are still based on the TLSv1.2 ones, but over time
they will be amended.
The new TLSv1.3 transitions remove SKE and CKE completely. There's also some
cleanup for some stuff which is not relevant to TLSv1.3 and is easy to
remove, e.g. the DTLS support (we're not doing DTLSv1.3 yet) and NPN.
I also disable EXTMS for TLSv1.3. Using it was causing some added
complexity, so rather than fix it I removed it, since eventually it will not
be needed anyway.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Checks that the epoch_time_in_ms field of CT_POLICY_EVAL_CTX is initialized
to approximately the current time (as returned by time()) by default. This
prevents the addition of this field, and its verification during SCT
validation, from breaking existing code that calls SCT_validate directly.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1554)
