The param builder and the params from text helpers also need to be modified
aware.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11601)
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11604)
... and only *define* them in the source files that need them.
Use DEFINE_OR_DECLARE which is set appropriately for internal builds
and not non-deprecated builds.
Deprecate stack-of-block
Better documentation
Move some ASN1 struct typedefs to types.h
Update ParseC to handle this. Most of all, ParseC needed to be more
consistent. The handlers are "recursive", in so far that they are called
again and again until they terminate, which depends entirely on what the
"massager" returns. There's a comment at the beginning of ParseC that
explains how that works. {Richard Levtte}
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10669)
The manpage is basically rewritten. Use consistent name/value
terminology. Use consistent phraseology to refer to section pointers
and lists of section pointers. Add more cross-references.
Also found a bunch of trivial style things in conf_api.c while
investigating how config works.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11431)
EVP_DigestSignInit() and EVP_DigestVerifyInit() would detect if there
is no default digest when using legacy (EVP_PKEY_ASN1_METHOD)
implementations. However, it doesn't do that when provider side keys
are used.
Furthermore, because EVP_PKEY_get_default_digest_name() was used in
the portion of the code that uses the provider implementation, the
EVP_PKEY_ASN1_METHOD would be used if the key has one attached. This
is now changed to use evp_keymgmt_util_get_deflt_digest_name()
instead.
Finally, we make sure to detect if the provider implementation
supports the digest name parameters (default or mandatory), and
returns with error if not. This is what the legacy portion of the
code does.
Fixes#11571
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11576)
evp_keymgmt_util_get_deflt_digest_name() is a refactor of the provider
side key part of EVP_PKEY_get_default_digest_name(), that takes
EVP_KEYMGMT and provider keydata pointers instead of an EVP_PKEY
pointer.
We also ensure that it uses SN_undef as the default name if the
provider implementation gave us an empty string, since this is what
EVP_PKEY_get_default_digest_name() responds when getting the digest
name via a EVP_PKEY_ASN1_METHOD ctrl call that returns NID_undef.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11576)
This fixes an assertion failure that can occur in the CMP code in the
event of a no-err build. The "improve_location_name" function assumed
that the fallback argument was always populated with something. However
in a no-err build this is not the case.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11584)
The order of the function's parameters `name_id` and `operation_id`
was reverted compared to their order of appearance in the comments
and assertions.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11542)
DH_set0_pqg() is now responsible for caching the nid, q and length.
DH with or without named safe prime groups now default to using the maximum private key length (BN_num_bits(q) - 1)
when generating a DH private key. The code is now shared between fips and non fips mode for DH key generation.
The OSSL_PKEY_PARAM_DH_PRIV_LEN parameter can be used during keygen to override the maximum private key length to be
in the range (2 * strength ... bits(q) - 1). Where the strength depends on the length of p.
Added q = (p - 1) / 2 safe prime BIGNUMS so that the code is data driven (To simplify adding new names).
The BIGNUMS were code generated.
Fix error in documented return value for DH_get_nid
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11562)
The erroneously introduced names grasshopper-* replaced with
kuznyechik-* according to official algorithm name translation.
Too long symbolic names replaced with human-enterable ones.
Also the mechanism of deprecating names in objects.txt is implemented
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11440)
Previously import_to just took an EVP_PKEY as the argument. However we
need to some additional context data as well - specifically the libctx.
Therefore we pass an EVP_PKEY_CTX instead to hold the combination of
both of these things.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11536)
The calls weren't quite right, as this function has changed its behaviour.
We also change the internal documentation of this function, and document
evp_pkey_downgrade().
Fixes#11549
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11550)
The internal version is library context aware.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11507)
This is the same as X509_verify() except that it takes a libctx and propq
parameter and signature verification is done using those.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11507)
Don't wrap whole files in if[n]def, test in build.info if they
should be compiled. rand_win isn't done as there are multiple
ways to say "this is windows."
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11263)
Don't wrap conditionally-compiled files in global ifndef tests.
Instead, test if the feature is disabled and, if so, do not
compile it.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11263)
Moved some shared FFC code into the FFC files.
Added extra paramgen parameters for seed, gindex.
Fixed bug in ossl_prov util to print bignums.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11303)
Now that d2i_PrivateKey_ex() and other similar functions exist we should
use it when loading a PEM PrivateKey.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11494)
The Ed448 private key deconding needs to use a library ctx. So we
implement a priv_decode_with_libctx function for it.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11494)
The Ed448 private key decoding makes algorithm fetches. Therefore we teach
d2i_PrivateKey et al about libctx and make sure it is passed through the
layers.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11494)
The EVP_KEYMGMT pointer in the pkey is removed when downgrading, but
wasn't necessarily freed when need, thus leaving an incorrect
reference count.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11328)
The reason to do this is many-fold. We need EC key generation for
other work. However, SM2 are currently closely related to EC keys
with legacy methods, but not with provider methods.
To avoid having to wait on provider support for SM2, we temporarly
do an extra check for what the legacy methods identify as SM2 keys
(either the EVP_PKEY_SM2 pkey id was used, or the SM2 curve), and
redirect to legacy code in one case, and in the other case, we
forcedly downgrade provider side EC keys with SM2 curves to legacy
SM2 keys, using available tools.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11328)
The macros are converted to functions, and are modified to support
provider implementations.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11328)
Fixes#11510
PR #11240 Added support for passing the libctx to the config loader.
As part of this work the call to OPENSSL_load_builtin_modules() + ENGINE_load_builtin_engines() was deferred until module_run() is called.
The call to ENGINE_load_builtin_engines() has been added to ENGINE_by_id().
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11543)
`BIO_do_accept` was returning incorrect values when unable to bind to a port.
Fixes#7717
CLA: trivial
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11505)
There was one spot where this function would look at ctx->pmeth
directly to determine if it's for RSASSA-PSS, which fails when
presented with an EVP_PKEY_CTX holding a provider side key.
Switching to use EVP_PKEY_is_a() should make things better.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11501)
The EVP_PKEY_ASN1_METHOD code used by CMS_RecipientInfo_kari_decrypt()
and cms_RecipientInfo_kari_encrypt() is quite complex and needs more
careful thought to work with provider side keys. Unfortunately, we
need to get key generation in place, among others for ECC keys, so we
add a temporary hack, similar to what's already done in TLS code, that
downgrades a provider side EVP_PKEY to become EVP_PKEY_ASN1_METHOD /
EVP_PKEY_METHOD based.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11501)
Just as for the FIPS module, there's code in the legacy module that need
this.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11504)
Ed25519 needs to fetch a digest and so needs to use the correct libctx.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11496)
Add the new functions CTLOG_STORE_new_with_libctx(),
CTLOG_new_with_libctx() and CTLOG_new_from_base64_with_libctx() to pass
in the library context/property query string to use a library context
is to be used.
We also add the function CT_POLICY_EVAL_CTX_new_with_libctx() to enable
the creation of a CT_POLICY_EVAL_CTX to be associated with a libctx and
property query string.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11483)
The EC export_to function calls EC_POINT_point2buf that can later
generate a random number in some circumstances. Therefore we pass in a
BN_CTX associated with the library context. This means we have to change
the export_to function signature to accept the library context.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11493)
By loading the null provider into the default context, it is possible
to verify that it is not accidentally being used.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11488)
DES, idea, seed, rc2, rc4, rc5, cast and blowfish have been moved out of the default provider.
Code shared between desx and tdes has been moved into a seperate file (cipher_tdes_common.c).
3 test recipes failed due to using app/openssl calls that used legacy ciphers.
These calls have been updated to supply both the default and legacy providers.
Fixed openssl app '-provider' memory leak
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11419)
Now that X509_STORE_CTX contain a libctx we should use it in a couple of
places where we cache the X509v3 extensions.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11457)
Make it possible to create an X509_STORE_CTX with an associated libctx
and propq.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11457)
libssl code uses EVP_PKEY_get0_EC_KEY() to extract certain basic data
from the EC_KEY. We replace that with internal EVP_PKEY functions.
This may or may not be refactored later on.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11358)
EVP_PKEY_is_a() is the provider side key checking function corresponding
to checking EVP_PKEY_id() or an EVP_PKEY against macros like EVP_PKEY_EC.
It also works with legacy internal keys.
We also add a warning indoc/man3/EVP_PKEY_set1_RSA.pod regarding the
reliability of certain functions that only understand legacy keys.
Finally, we take the opportunity to clean up doc/man3/EVP_PKEY_set1_RSA.pod
to better conform with man-page layout norms, see man-pages(7) on Linux.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11358)
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11147)
Previous a get string (UTF8 or octet) params call would memcpy(2) from a NULL
pointer if the OSSL_PARAM didn't have its data field set. This change makes
the operation fail rather than core dump and it returns to param size (if set).
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11474)
This was pointed out by a false-positive
-fsanitizer warning ;-)
However from the cryptographical POV the
code is wrong:
A point R^0 on the wrong curve
is infinity on the wrong curve.
[extended tests]
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11475)
This library is meant to be small and quick. It's based on WPACKET,
which was extended to support DER writing. The way it's used is a
bit unusual, as it's used to write the structures backward into a
given buffer. A typical quick call looks like this:
/*
* Fill in this structure:
*
* something ::= SEQUENCE {
* id OBJECT IDENTIFIER,
* x [0] INTEGER OPTIONAL,
* y [1] BOOLEAN OPTIONAL,
* n INTEGER
* }
*/
unsigned char buf[nnnn], *p = NULL;
size_t encoded_len = 0;
WPACKET pkt;
int ok;
ok = WPACKET_init_der(&pkt, buf, sizeof(buf)
&& DER_w_start_sequence(&pkt, -1)
&& DER_w_bn(&pkt, -1, bn)
&& DER_w_boolean(&pkt, 1, bool)
&& DER_w_precompiled(&pkt, -1, OID, sizeof(OID))
&& DER_w_end_sequence(&pkt, -1)
&& WPACKET_finish(&pkt)
&& WPACKET_get_total_written(&pkt, &encoded_len)
&& (p = WPACKET_get_curr(&pkt)) != NULL;
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11450)
If we encounter certificate with basic constraints CA:false,
pathlen present and X509_V_FLAG_X509_STRICT is set we set
X509_V_ERR_INVALID_EXTENSION error.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11463)
Do not mark such certificates with EXFLAG_INVALID although they
violate the RFC 5280, they are syntactically correct and
openssl itself can produce such certificates without any errors
with command such as:
openssl x509 -req -signkey private.pem -in csr.pem -out cert.pem \
-extfile <(echo "basicConstraints=CA:FALSE,pathlen:0")
With the commit ba4356ae40 the
EXFLAG_INVALID causes openssl to not consider such certificate
even as leaf self-signed certificate which is breaking existing
installations.
Fixes: #11456
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11463)
a9612d6c03 introduced possible memory leaks in EC_GROUP_cmp and EC_POINTs_mul, and a possible BN_CTX_end without BN_CTX_start in ec_field_inverse_mod_ord.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11452)
Also improve the generic HTTP client w.r.t. proxy and no_proxy options.
Certificate Management Protocol (CMP, RFC 4210) extension to OpenSSL
Also includes CRMF (RFC 4211) and HTTP transfer (RFC 6712).
Adds the CMP and CRMF API to libcrypto and the "cmp" app to the CLI.
Adds extensive documentation and tests.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11404)
The value is of type uint64 but the format
%ld is not suitable for that, need to use %jd.
[extended tests]
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11454)
- Convert to affine coords on ladder entry. This lets us use more efficient
ladder step formulae.
- Convert to affine coords on ladder exit. This prevents the current code
awkwardness where conversion happens twice during serialization: first to
fetch the buffer size, then again to fetch the coords.
- Instead of projectively blinding the input point, blind both accumulators
independently.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/11435)
Currently only RSA, EC and ECX are supported (DH and DSA need to be added to the keygen
PR's seperately because the fields supported have changed significantly).
The API's require the keys to be provider based.
Made the keymanagement export and get_params functions share the same code by supplying
support functions that work for both a OSSL_PARAM_BLD as well as a OSSL_PARAM[].
This approach means that complex code is not required to build an
empty OSSL_PARAM[] with the correct sized fields before then doing a second
pass to populate the array.
The RSA factor arrays have been changed to use unique key names to simplify the interface
needed by the user.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11365)
Starting `cnt` from 1 would work if we weren't using cnt itself to
access elements of the array returned calling the provider callback.
As it is before this commit, we have 2 problems:
- first, in the unlikely case that the incoming array was "empty" (only
contains the terminator item) we would skip past it and potentially
end up with oob reads;
- otherwise, at the end of the while loop, `cnt` will be equal to the
number of items in the input array, not 1 more. We then add 1 more to
the zalloc call to account for the library name item, and we fill all
of it (relying on zalloc to have zeroed the terminator item).
The first read access that will read the list up to the terminator
will result in a OOB read as we did not allocate enough space to also
contain the terminator.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11427)
Various functions cause the results of processing extensions to be
cached. The processing itself requires a libctx, and so this implicit
caching means that the default ctx is used which can lead to failures.
By explicitly caching the extensions we can specify the libctx to be used.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11409)
Prior to this, the param builder had a statically sized array internally.
This changes it so that it uses a stack instead.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11390)
Since this is public, it is best to make the underlying structure opaque.
This means converting from stack allocation to dynamic allocation for all
usages.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11390)
The catalyst for this is the difficult of passing BNs through the other
OSSL_PARAM APIs.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11390)
The provider key export functions for EC_KEY assumed that a public key
is always present, and would fail if not. This blocks any attempt to
export a key structure with only domain parameters.
This is similar to earlier work done in EVP_PKEY_ASN1_METHODs.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11394)
In order for the TLS SRP tests to pass when using a non-default library
context the underlying SRP calls need to be library context aware.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11410)
OCSP_RESPID_set_by_key() calculates a SHA1 hash of the supplied
certificate. We need to be able to specify which libctx and property
query string is used to fetch that algorithm so we introduce
OCSP_RESPID_set_by_key_ex() which does the same thing but enables you to
speicfy the library context and propery query string explicitly.
OCSP_RESPID_match() matches with certificates based on the SHA1 hash.
Therefore for the same reason we introduce OCSP_RESPID_match_ex().
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11407)
Some fetch failurs are ok and should be ignored.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11405)
Fetch failures are a common problem and it is useful to have detailed
information about what was requested in the event of a failure.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11405)
Provider KEYMGMT functions can handle domain parameters as well as
"other" parameters (the cofactor mode flag in ECC keys is one of
those). The public EVP functions EVP_PKEY_copy_parameters(),
EVP_PKEY_missing_parameters(), EVP_PKEY_cmp_parameters() and
EVP_PKEY_cmp() tried to handle all parameters, but looking back at
EVP_PKEY_ASN1_METHOD code (especially crypto/ec/ec_ameth.c), it turns
out that they only need to concern themselves with domain parameters.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11375)
Downgrading EVP_PKEYs from containing provider side internal keys to
containing legacy keys demands support in the EVP_PKEY_ASN1_METHOD.
This became a bit elaborate because the code would be almost exactly
the same as the import functions int EVP_KEYMGMT. Therefore, we end
up moving most of the code to common backend support files that can be
used both by legacy backend code and by our providers.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11375)
Upgrading EVP_PKEYs from containing legacy keys to containing provider
side keys proved to be risky, with a number of unpleasant corner
cases, and with functions like EVP_PKEY_get0_DSA() failing
unexpectedly.
We therefore change course, and instead of upgrading legacy internal
keys to provider side internal keys, we downgrade provider side
internal keys to legacy ones. To be able to do this, we add
|import_from| and make it a callback function designed for
evp_keymgmt_export().
This means that evp_pkey_upgrade_to_provider() is replaced with
evp_pkey_downgrade().
EVP_PKEY_copy_parameters() is the most deeply affected function of
this change.
Fixes#11366
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11375)
This function intialises an EVP_PKEY to contain a provider side internal
key.
We take the opportunity to also document the older EVP_PKEY_set_type()
and EVP_PKEY_set_type_str().
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11375)
EVP_PKEY is rather complex, even before provider side keys entered the
stage.
You could have untyped / unassigned keys (pk->type == EVP_PKEY_NONE),
keys that had been assigned a type but no data (pk->pkey.ptr == NULL),
and fully assigned keys (pk->type != EVP_PKEY_NONE && pk->pkey.ptr != NULL).
For provider side keys, the corresponding states weren't well defined,
and the code didn't quite account for all the possibilities.
We also guard most of the legacy fields in EVP_PKEY with FIPS_MODE, so
they don't exist at all in the FIPS module.
Most of all, code needs to adapt to the case where an EVP_PKEY's
|keymgmt| is non-NULL, but its |keydata| is NULL.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11375)
We can find no reason why everyone should have to call both
EC_curve_nist2nid() and ec_curve_name2nid() to find the NID for a
name, and it's too easy to forget EC_curve_nist2nid(), so we make life
simpler.
One could argue that FIPS only allows a limited set of names, but that
now gets handled internally, and those who really want to be really
sure to only get the NIST names can still do so with EC_curve_nist2nid()
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11391)
Certificate Management Protocol (CMP, RFC 4210) extension to OpenSSL
Also includes CRMF (RFC 4211) and HTTP transfer (RFC 6712).
Adds the CMP and CRMF API to libcrypto and the "cmp" app to the CLI.
Adds extensive documentation and tests.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11300)
EVP_PKEY_new_mac_key() was failing if the specified MAC was not available
in the default provider - even though that MAC is never actually needed
to successfully complete the function. The resulting EVP_PKEY can then
be used in some non-default libctx which *does* have the MAC loaded.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11360)
We use the SHA256 digest of the ticket as a "fake" session id. We should
ensure that the SHA256 implementation is fetched from the appropriate
provider.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11356)
Even though an application callS the new EVP_DigestSignInit_ex()
function to pass an mdname by string rather than EVP_MD, we may still end
up in legacy codepaths, and therefore we need to handle either mdname or
EVP_MD, in both legacy and non-legacy codepaths.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11353)
EVP_DigestSignInit_ex and EVP_DigestVerifyInit_ex did not provide the
capability to specify an explicit OPENSSL_CTX parameter. It is still
possible by explicitly setting an EVP_PKEY_CTX - but in most cases it
would be much simpler to just specify it in the Init call. We add the
capability to do that.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11353)
The export-to-provider functions for DH, DSA and EC_KEY assumed that a
public key is always present, and would fail if not. This blocks any
attempt to export a key structure with only domain parameters.
While fixing this, we also modify the selection declaration to
evp_keymgmt_import() to be more adaptive, the diverse selection bits
are now added when the corresponding data is added to the OSSL_PARAM
array.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11374)
in particular X509_NAME*, X509_STORE{,_CTX}*, and ASN1_INTEGER *,
also some result types of new functions, which does not break compatibility
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/10504)
Basically we use EXFLAG_INVALID for all kinds of out of memory and
all kinds of parse errors in x509v3_cache_extensions.
[extended tests]
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10755)
Instead of fetching the EVP_KEYMGMT in the init for every different
operation, do it when creating the EVP_PKEY_CTX.
This allows certain control functions to be called between the
creation of the EVP_PKEY_CTX and the call of the operation's init
function.
Use case: EVP_PKEY_CTX_set1_id(), which is allowed to be called very
early with the legacy implementation, this should still be allowed
with provider implementations.
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
(Merged from https://github.com/openssl/openssl/pull/11343)
The self tests for the fips module are triggered on startup and they need to know the
core's libctx in order to function correctly. As the provider can be autoloaded via configuration
it then needs to propagate the callers libctx down to the provider via the config load.
Note that OPENSSL_init_crypto(OPENSSL_INIT_LOAD_CONFIG, ..) is still called, but will only load the default
configuration if the OPENSSL_CONF environment variable is set.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11240)
At various points in crypto/rsa we need to get random numbers. We should
ensure that we use the correct libctx when doing so.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11355)
EVP_MD_CTX_ctrl assumes that a digest has always been set. However in a
non-legacy EVP_DigestSign* operation this is not the case because the
digest is handled entirely by the underlying signature implementation.
This fixes one of the travis failures on the master branch.
[extended tests]
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11317)
This is largely based on the existing X25519 and X448 serializers - but
a few adjustments were necessary so that we can identify what type of key
we are using. Previously we used the keylen for this but X25519 and
ED25519 have the same keylen.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11272)
This requires duplicating the KTLS changes from bss_sock.c in
bss_conn.c. One difference from BIO_TYPE_SOCKET is that the call to
ktls_enable is performed after the socket is created in BIO_socket
rather than BIO_new_connect.
Some applications such as 'openssl s_time' use connect BIOs instead of
socket BIOs. Note that the new connections created for accept BIOs
use BIO_TYPE_SOCKET via BIO_new_socket, so bss_acpt.c does not require
changes.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10489)
Because we start using Distinguished ID, we also define the key name
"distid", possibly prefixed with "hex", but keep "sm2_id" and
"sm2_hex_id" for compatibility with GmSSL.
Fixes#11293
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
(Merged from https://github.com/openssl/openssl/pull/11302)
- X509_set0_sm2_id() -> X509_set0_distinguishing_id()
- X509_get0_sm2_id() -> X509_get0_distinguishing_id()
- X509_REQ_set0_sm2_id -> X509_REQ_set0_distinguishing_id()
- X509_REQ_get0_sm2_id -> X509_REQ_get0_distinguishing_id()
The reason for this rename is that the SM2 ID isn't really a unique
SM2 data item, but rather a re-use of the Distinguished that is
defined in ISO/IEC 15946-3 as well as in FIPS 196, with no special
attribution toward any algorithm in particular.
Fixes#11293
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
(Merged from https://github.com/openssl/openssl/pull/11302)
A huge problem with calling digest_custom() already in the
initialization of DigestSign, DigestVerify etc, is that it force all
callers to know that certain controls must be performed before Init
and the rest after. This has lead to quite interesting hacks in our
own openssl app, where the SM2 ID had to get special treatment instead
of just being another sign option or verification option among others.
This change moves the call of digest_custom() to the Update and Final
functions, to be done exactly once, subject to a flag that's set in
the Init function. Seeing to the process of data, through these
operations, this makes no difference at all. Seeing to making it
possible to perform all controls after the Init call, this makes a
huge difference.
Fixes#11293
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
(Merged from https://github.com/openssl/openssl/pull/11302)
The keytype number will only be -1 when control commands are used for
more than one key type. Sometimes, they share the same underlying
structure, and sometimes not.
Some of the RSA control commands that are using only with the keytype
EVP_PKEY_RSA we misplaced to be handled with the keytype -1.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11329)
Old files from the SSLeay 0.8.1b import that aren't used and don't seem to be
installed.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11314)
The first field was called 'pad', but not for the reason one might
think. It was really a padding int that was always zero, and was
placed first on purpose. This is to pick up programming errors where
an RSA pointer was passed when an EVP_PKEY pointer should have been,
an makes it look like an EVP_PKEY structure with type EVP_PKEY_NONE,
which effectively avoids any further processing (and unintended
corruption of the RSA structure).
This is only relevant for legacy structure and EVP_PKEY_METHODs. With
providers, EVP_PKEYs aren't passed to the backend anyway.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11315)
The server-side ChangeCipherState processing stores the new cipher
in the SSL_SESSION object, so that the new state can be used if
this session gets resumed. However, writing to the session is only
thread-safe for initial handshakes, as at other times the session
object may be in a shared cache and in use by another thread at the
same time. Reflect this invariant in the code by only writing to
s->session->cipher when it is currently NULL (we do not cache sessions
with no cipher). The code prior to this change would never actually
change the (non-NULL) cipher value in a session object, since our
server enforces that (pre-TLS-1.3) resumptions use the exact same
cipher as the initial connection, and non-abbreviated renegotiations
have produced a new session object before we get to this point.
Regardless, include logic to detect such a condition and abort the
handshake if it occurs, to avoid any risk of inadvertently using
the wrong cipher on a connection.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10943)
The following functions are added:
EVP_PKEY_gen_set_params(), replacing the older EVP_PKEY_CTX_ctrl()
EVP_PKEY_gen(), replacing both EVP_PKEY_keygen() and EVP_PKEY_paramgen()
These functions are made to work together with already existing domparams
and key generation functionality: EVP_PKEY_CTX_new_provided(),
EVP_PKEY_paramgen_init(), EVP_PKEY_keygen_init(), etc.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10289)
We introduce these dispatched functions:
- OP_keymgmt_gen_init() to initialize the key object generation.
- OP_keymgmt_gen_set_template() to set a template for key object
generation. The template is another key object, for example one
with domain parameters.
- OP_keymgmt_gen_set_params() to set other key object generation
parameters.
- OP_keymgmt_gen_settable_params() to find out what settable
parameters there are.
- OP_keymgmt_gen() to perform the key object generation.
- OP_keymgmt_gen_cleanup() to clean up the key object generation.
Internal function for easy and consistent use of these ddispatched
functions are added.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10289)
Note: This PR has not attempted to move the curves into the provider dispatch table.
Mappings between the curve name / nid have been added to the inbuilt curve table.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11133)
The code was assuming that a serializer would always be found - but this
may not be the case.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11271)
Optimize the the AES-based implementation of the CTR_DRBG
construction, see 10.2.1 in [1].
Due to the optimizations, the code may deviate (more) from the
pseudocode in [1], but it is functional equivalence being decisive
for compliance:
"All DRBG mechanisms and algorithms are described in this document
in pseudocode, which is intended to explain functionality.
The pseudocode is not intended to constrain real-world
implementations." [9 in [1]].
The following optimizations are done:
- Replace multiple plain AES encryptions by a single AES-ECB
encryption of a corresponding pre-initialized buffer, where
possible.
This allows platform-specific AES-ECB support to
be used and reduces the overhead of multiple EVP calls.
- Replace the generate operation loop (which is a counter
increment followed by a plain AES encryption) by a
loop which does a plain AES encryption followed by
a counter increment. The latter loop is just a description
of AES-CTR, so we replace it by a single AES-CTR
encryption.
This allows for platform-specific AES-CTR support to be used
and reduces the overhead of multiple EVP calls.
This change, that is, going from a pre- to a post- counter
increment, requires the counter in the internal state
to be kept at "+1" (compared to the pseudocode in [1])
such that it is in the correct state, when a generate
operation is called.
That in turn also requires all other operations to be
changed from pre- to post-increment to keep functional
equivalence.
[1] NIST SP 800-90A Revision 1
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10457)
Certificate Management Protocol (CMP, RFC 4210) extension to OpenSSL
Also includes CRMF (RFC 4211) and HTTP transfer (RFC 6712).
Adds the CMP and CRMF API to libcrypto and the "cmp" app to the CLI.
Adds extensive documentation and tests.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11142)
This should have been publically present a long time ago, to be
consistent with the RSA, DSA and EC_KEY APIs. However, since we've
now deprecated that kind of function for the other key types, there's
no point in adding a public function, but we still need it internally.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11193)
The EVP_PKEY_ASN1_METHOD function export_to() must check that the key
we're trying to export has a known libcrypto method, i.e. is a built
in RSA_METHOD, DSA_METHOD, etc. Otherwise, the method may be defined
by the calling application, by an engine, by another library, and we
simply cannot know all the quirks hidden behind that method, if we
have access to the key data, or much anything.
Such keys are simply deemed impossible to export to provider keys,
i.e. have export_to() return 0. This cascades back to functions like
evp_pkey_export_to_provider() and evp_pkey_upgrade_to_provider() and
their callers. In most cases, this is fine, but if these get mixed in
with provider side keys in any function, that function will fail.
Fixes#11179Fixes#9915
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11193)
Fetch once and just pass the global ex_data to the "get_and_lock" static
function.
Removed a redundant null pointer check within the "get_and_lock" static
function (control already performed by the caller).
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11152)
At the moment we only provider support for these algorithms in the default
provider. These algorithms only support "one shot" EVP_DigestSign() and
EVP_DigestVerify() as per the existing libcrypto versions.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11261)
These "one-shot" functions are the only ones supported by Ed25519 and
Ed448, so we need to ensure that libcrypto can handle provider
based implementations of these functions.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11261)
The code in this function was almost entirely a copy of the
functionality in ASN1_item_sign(), so it gets refactored to actually
call ASN1_item_sign(), and thereby automatically gets support for
EVP_PKEYs with only provider side keys.
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11126)
Add a -provider option to allow providers to be loaded. This option can be
specified multiple times.
Add a -provider_path option to allow the path to providers to be specified.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11167)
Fixes#11108.
It only sets q if a valid named group is found.
The function signature was recently changed to pass a non const DH pointer
in order to allow the nid to be cached internally. As an extension of this
the value of q can now also be set as q is always known for named groups.
The length field is also set if q is set.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11114)
Provide EC serializers for text, pem and der.
EC parameters use ANS1 'CHOICE' - which means they are more embedded than other parameters used by
other KEY types (which normally have a SEQUENCE at the top level).
For this reason the ANS1_STRING type that was being passed around has been changed to a void so that the
code can still be shared with EC.
The EC serializer only supports named curves currently.
NOTE the serializer code assumes PKCS8 format - if the older encode methods are needed they will need to be
added in another PR. (Probably when deserialization is considered).
EVP_PKEY_key_fromdata_init was changed from using a keypair selection to all bits of a key. A side effect of this was
that the very restrictive checks in the ecx code needed to be relaxed as it was assuming all selection flags were non
optional. As this is not the case for any other key the code has been modified.
Fixed a bug in legacy_ctrl_str_to_params() - "ecdh_cofactor_mode" was being incorrectly converted to the wrong keyname.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11107)
This adds evp_keymgmt_util_copy() and affects EVP_PKEY_copy_parameters()
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11158)
This adds evp_keymgmt_util_match() and affects EVP_PKEY_cmp() and
EVP_PKEY_cmp_parameters().
The word 'match' was used for the new routines because many associate
'cmp' with comparison functions that allows sorting, i.e. return -1, 0
or 1 depending on the order in which the two compared elements should
be sorted. EVP_PKEY_cmp() and EVP_PKEY_cmp_parameters() don't quite
do that.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11158)
It turns out that GNU as and Solaris as don't have compatible ideas on
the .section syntax, so we need to check if we're using GNU as or
another assembler and adapt this .section syntax accordingly.
Fixes#11132
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11191)
This function "upgrades" a key from a legacy key container to a
provider side key container.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11148)
The role of this cache was two-fold:
1. It was a cache of key copies exported to providers with which an
operation was initiated.
2. If the EVP_PKEY didn't have a legacy key, item 0 of the cache was
the corresponding provider side origin, while the rest was the
actual cache.
This dual role for item 0 made the code a bit confusing, so we now
make a separate keymgmt / keydata pair outside of that cache, which is
the provider side "origin" key.
A hard rule is that an EVP_PKEY cannot hold a legacy "origin" and a
provider side "origin" at the same time.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11148)
CLA: trivial
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/11175)
These are old functions that fell out of use with OpenSL 0.9.7.
It's more than time to deprecate them.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11161)
If the user specifies a minimum allocation size that is smaller than
the free list structure (or zero), calculate the minimum possible size rather
than failing.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11149)
Conditional code readability improvement.
Remove unused macro
Commit #11042 has introduced a new, unused, CRYPTO_EX_INDEX macro.
Remove before version release.
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11103)
Previously, the initialization was done immediately in RAND_DRBG_set(),
which is also called in RAND_DRBG_uninstantiate().
This made it difficult for the FIPS DRBG self test to verify that the
internal state had been zeroized, because it had the side effect that
the drbg->data structure was reinitialized immediately.
To solve the problem, RAND_DRBG_set() has been split in two parts
static int rand_drbg_set(RAND_DRBG *drbg, int type, unsigned int flags);
static int rand_drbg_init_method(RAND_DRBG *drbg);
and only the first part is called from RAND_DRBG_uninstantiate().
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11111)
Previously, evp-keymgmt_util_export_to_provider() took care of all
kinds of exports of EVP_PKEYs to provider side keys, be it from its
legacy key or from another provider side key. This works most of the
times, but there may be cases where the caller wants to be a bit more
in control of what sort of export happens when.
Also, when it's time to remove all legacy stuff, that job will be much
easier if we have a better separation between legacy support and
support of provided stuff, as far as we can take it.
This changes moves the support of legacy key to provider side key
export from evp-keymgmt_util_export_to_provider() to
evp_pkey_make_provided(), and makes sure the latter is called from all
EVP_PKEY functions that handle legacy stuff.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11074)
Made macro names that refer to a known base OID, an commented accordingly.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10557)
This includes legacy PSS controls to params conversion, and an attempt
to generalise the parameter names when they are suitable for more than
one operation.
Also added crypto/rsa/rsa_aid.c, containing proper AlgorithmIdentifiers
for known RSA+hash function combinations.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10557)
We were excluding more code than we needed to in the OCSP/HTTP code in
the event of no-sock. We should also not assume that a BIO passed to our
API is socket based.
This fixes the no-sock build
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11134)
Replace the properties default, fips and legacy with a single property
called "provider". So, for example, instead of writing "default=yes" to
get algorithms from the default provider you would instead write
"provider=default". We also have a new "fips" property to indicate that
an algorithm is compatible with FIPS mode. This applies to all the
algorithms in the FIPS provider, as well as any non-cryptographic
algorithms (currently only serializers).
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11097)
When converting legacy controls to OSSL_PARAMs, return the unsupported -2
value correctly.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11049)
Use of the low level DH functions has been informally discouraged for a
long time. We now formally deprecate them.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11024)
Use of the low level RSA functions has been informally discouraged for a
long time. We now formally deprecate them.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11063)
`BN_copy()` (and indirectly `BN_dup()`) do not propagate the
`BN_FLG_CONSTTIME` flag: the propagation has been turned on and off a
few times in the past years, because in some conditions it has shown
unintended consequences in some code paths.
Without turning the propagation on once more, we can still improve
`BN_copy()` by avoiding to leak `src->top` in case `src` is flagged with
`BN_FLG_CONSTTIME`.
In this case we can instead use `src->dmax` as the number of words
allocated for `dst` and for the `memcpy` operation.
Barring compiler or runtime optimizations, if the caller provides `src`
flagged as const time and preallocated to a public size, no leak should
happen due to the copy operation.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10631)
We should never leak the bit length of the secret scalar in the key,
so we always set the `BN_FLG_CONSTTIME` flag on the internal `BIGNUM`
holding the secret scalar.
This is important also because `BN_dup()` (and `BN_copy()`) do not
propagate the `BN_FLG_CONSTTIME` flag from the source `BIGNUM`, and
this brings an extra risk of inadvertently losing the flag, even when
the called specifically set it.
The propagation has been turned on and off a few times in the past
years because in some conditions has shown unintended consequences in
some code paths, so at the moment we can't fix this in the BN layer.
In `EC_KEY_set_private_key()` we can work around the propagation by
manually setting the flag after `BN_dup()` as we know for sure that
inside the EC module the `BN_FLG_CONSTTIME` is always treated
correctly and should not generate unintended consequences.
Setting the `BN_FLG_CONSTTIME` flag alone is never enough, we also have
to preallocate the `BIGNUM` internal buffer to a fixed public size big
enough that operations performed during the processing never trigger
a realloc which would leak the size of the scalar through memory
accesses.
Fixed Length
------------
The order of the large prime subgroup of the curve is our choice for
a fixed public size, as that is generally the upper bound for
generating a private key in EC cryptosystems and should fit all valid
secret scalars.
For preallocating the `BIGNUM` storage we look at the number of "words"
required for the internal representation of the order, and we
preallocate 2 extra "words" in case any of the subsequent processing
might temporarily overflow the order length.
Future work
-----------
A separate commit addresses further hardening of `BN_copy()` (and
indirectly `BN_dup()`).
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10631)
For EC keys it is particularly important to avoid leaking the bit length
of the secret scalar.
Key import/export should never leak the bit length of the secret
scalar in the key.
For this reason, on export we use padded BIGNUMs with fixed length,
using the new `ossl_param_bld_push_BN_pad()`.
When importing we also should make sure that, even if short lived,
the newly created BIGNUM is marked with the BN_FLG_CONSTTIME flag as
soon as possible, so that any processing of this BIGNUM might opt for
constant time implementations in the backend.
Setting the BN_FLG_CONSTTIME flag alone is never enough, we also have
to preallocate the BIGNUM internal buffer to a fixed size big enough
that operations performed during the processing never trigger a
realloc which would leak the size of the scalar through memory
accesses.
Fixed length
------------
The order of the large prime subgroup of the curve is our choice for
a fixed public size, as that is generally the upper bound for
generating a private key in EC cryptosystems and should fit all valid
secret scalars.
For padding on export we just use the bit length of the order
converted to bytes (rounding up).
For preallocating the BIGNUM storage we look at the number of "words"
required for the internal representation of the order, and we
preallocate 2 extra "words" in case any of the subsequent processing
might temporarily overflow the order length.
Future work
-----------
To ensure the flag and fixed size preallocation persists upon
`EC_KEY_set_private_key()`, we need to further harden
`EC_KEY_set_private_key()` and `BN_copy()`.
This is done in separate commits.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10631)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10631)
A pair of internal functions related to EC_KEY handling could benefit
from declaring `EC_KEY *` variables as `const`, providing clarity for
callers and readers of the code, in addition to enlisting the compiler
in preventing some mistakes.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10631)
Since pointer in x32 is 4 bytes, add x86_64-support.pl to define
pointer_size and pointer_register based on flavour to support
stuctures like:
struct { void *ptr; int blocks; }
This fixes 90-test_sslapi.t on x32. Verified with
$ ./Configure shared linux-x86_64
$ make
$ make test
and
$ ./Configure shared linux-x32
$ make
$ make test
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10988)
add CMP message validation and related tests; while doing so:
* add ERR_add_error_mem_bio() to crypto/err/err_prn.c
* move ossl_cmp_add_error_txt() as ERR_add_error_txt() to crypto/err/err_prn.c
* add X509_STORE_CTX_print_verify_cb() to crypto/x509/t_x509.c,
adding internally x509_print_ex_brief(), print_certs(), and print_store_certs()
* move {ossl_cmp_,}X509_STORE_get1_certs() to crypto/x509/x509_lu.c
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/10620)
in addition:
correct wording in doc, comments, and parameter names: self-signed -> self-issued where appropriate
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/10620)
in particular:
consolidate documentation of CMP logging and error reporting functions
fix compilation problem with clang on some platforms
rename OSSL_CMP_log etc. to ossl_cmp_log etc. since these macros are CMP-internal
move chopping of trailing separator to ossl_cmp_add_error_txt(), also fix handling of leading separator
internalize X509_print_ex_brief() as x509_print_ex_brief()
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/10620)
In https://github.com/openssl/openssl/pull/10883, I'd meant to exclude
the perlasm drivers since they aren't opening pipes and do not
particularly need it, but I only noticed x86_64-xlate.pl, so
arm-xlate.pl and ppc-xlate.pl got the change.
That seems to have been fine, so be consistent and also apply the change
to x86_64-xlate.pl. Checking for errors is generally a good idea.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
(Merged from https://github.com/openssl/openssl/pull/10930)
FIXES#10692#10638
a bug for aarch64 bigendian with instructions 'st1' and 'ld1' on AES-GCM mode.
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10751)
Embed libctx in dsa and dh objects and cleanup internal methods to not pass libctx (This makes it consistent with the rsa changes)
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10910)
To support Intel CET, all indirect branch targets must start with
endbranch. Here is a patch to add endbranch to function entries
in x86_64 assembly codes which are indirect branch targets as
discovered by running openssl testsuite on Intel CET machine and
visual inspection.
Verified with
$ CC="gcc -Wl,-z,cet-report=error" ./Configure shared linux-x86_64 -fcf-protection
$ make
$ make test
and
$ CC="gcc -mx32 -Wl,-z,cet-report=error" ./Configure shared linux-x32 -fcf-protection
$ make
$ make test # <<< passed with https://github.com/openssl/openssl/pull/10988
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10982)
Adding support for "no-secure-memory" was simple, a one-liner.
Fixing all the "ifdef OPENSSL_SECURE_MEMORY" to be "ifndef NO_xxx"
was a bit more work. My original goof, for not following the OpenSSL
pattern "ifndef NO_" used everywhere else.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/11023)
It uses EVP_PKEY serializers to get the desired results.
One might think that ddoing this might make things a bit dicy for
existing serializers, as they should obviously use i2d functions.
However, since our serializers use much more primitive functions
such as i2d_ASN1_INTEGER(), or keytype specific ones such as
i2d_RSAPrivateKey(), there is no clash.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11056)
We should always generate .note.gnu.property section in x86_64 assembly
codes for ELF outputs to mark Intel CET support since all input files
must be marked with Intel CET support in order for linker to mark output
with Intel CET support. Also .note.gnu.property section in x32 should
be aligned to 4 bytes, not 8 bytes and .p2align should be used
consistently.
Verified with
$ CC="gcc -Wl,-z,cet-report=error" ./Configure shared linux-x86_64 -fcf-protection
$ make
$ make test
and
$ CC="gcc -mx32 -Wl,-z,cet-report=error" ./Configure shared linux-x32 -fcf-protection
$ make
$ make test # <<< 90-test_sslapi.t failed because 8-byte pointer size.
Fix#10896
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10985)
RSA ASYM_CIPHER was already available within the default provider. We
now make it also available from inside the FIPS module.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10881)
It's already used internally, there's no reason the DER serializer
propqueries shouldn't be present alongside the PEM and TEXT ones.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11055)
fix also formatting nits w.r.t. #if indentations in ocsp.h
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11058)
The recently introduced ossl_param_bld_to_param_ex() function is only
called by the unit tests.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11053)
This function is recently introduced and never called by the library or tests.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11053)
Use of the low level DSA functions has been informally discouraged for a
long time. We now formally deprecate them.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10977)
Add ref counting and control how we allocate storage for the private key.
We will need this type in following commits where we move the ecx code
to be provider aware.
Reviewed-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10964)
With the provided method of creating the new X509_PUBKEY, an extra
EVP_PKEY is created and needs to be properly cleaned away.
(note: we could choose to keep it just as well, but there are
consequences, explained in a comment in the code)
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11038)
The new client has become an independent libcrpyto module in crypto/http/ and
* can handle any types of requests and responses (ASN.1-encoded and plain)
* does not include potentially busy loops when waiting for responses but
* makes use of a new timeout mechanism integrated with socket-based BIO
* supports the use of HTTP proxies and TLS, including HTTPS over proxies
* supports HTTP redirection via codes 301 and 302 for GET requests
* returns more useful diagnostics in various error situations
Also adapts - and strongly simplifies - hitherto uses of HTTP in crypto/ocsp/,
crypto/x509/x_all.c, apps/lib/apps.c, and apps/{ocsp,s_client,s_server}.c
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/10667)
Typedefs of CRYPTO malloc, realloc and free.
MEM_CHECK "modes" are used only as a CRYPTO_mem_ctrl() parameter
The CRYPTO_mem_ctrl is defined only if OPENSSL_NO_CRYPTO_MDEBUG is
defined, thus define the MEM_CHECK modes under the same condition.
Maybe the macros can be removed at all since:
1. CRYPTO_mem_ctrl() just returns -1 and ignores the parameter
2. CRYPTO_mem_ctr() is declared as DEPRECATED by 3.0
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11042)
We should always generate .note.gnu.property section in x86 assembly
codes for ELF outputs to mark Intel CET support since all input files
must be marked with Intel CET support in order for linker to mark output
with Intel CET support.
Verified with
$ CC="gcc -Wl,-z,cet-report=error" ./Configure shared linux-x86 -fcf-protection
$ make
$ make test
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11044)
Recent SM2 related changes were not properly guarded with OPENSSL_NO_EC
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/11029)
When Intel CET is enabled, makecontext will create a different shadow
stack for each context. async_fibre_swapcontext cannot use _longjmp.
It must call swapcontext to swap shadow stack as well as normal stack.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10983)
The callback data allows passing context specific data from the
application of the DRBG to to the entropy callbacks.
This a rather specialized feature which is useful for implementing
known answer tests (KATs) or deterministic signatures (RFC6979),
which require passing a specified entropy and nonce for instantiating
the DRBG.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10950)
The same go for the pairs import + import_types and export + export_types.
This required some additional changes in our KEYMGMT implementations.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11006)
The KEYMGMT libcrypto <-> provider interface currently makes a few
assumptions:
1. provider side domain parameters and key data isn't mutable. In
other words, as soon as a key has been created in any (loaded,
imported data, ...), it's set in stone.
2. provider side domain parameters can be strictly separated from the
key data.
This does work for the most part, but there are places where that's a
bit too rigid for the functionality that the EVP_PKEY API delivers.
Key data needs to be mutable to allow the flexibility that functions
like EVP_PKEY_copy_parameters promise, as well as to provide the
combinations of data that an EVP_PKEY is generally assumed to be able
to hold:
- domain parameters only
- public key only
- public key + private key
- domain parameters + public key
- domain parameters + public key + private key
To remedy all this, we:
1. let go of the distinction between domain parameters and key
material proper in the libcrypto <-> provider interface.
As a consequence, functions that still need it gain a selection
argument, which is a set of bits that indicate what parts of the
key object are to be considered in a specific call. This allows
a reduction of very similar functions into one.
2. Rework the libcrypto <-> provider interface so provider side key
objects are created and destructed with a separate function, and
get their data filled and extracted in through import and export.
(future work will see other key object constructors and other
functions to fill them with data)
Fixes#10979
squash! Redesign the KEYMGMT libcrypto <-> provider interface - the basics
Remedy 1 needs a rewrite:
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11006)
Some of the evp_keymgmt_ functions are just wrappers around the
EVP_KEYMGMT function pointers. We move those from keymgmt_lib.c to
keymgmt_meth.c.
Other evp_keymgmt_ functions are utility functions to help the rest of
the EVP functions. Since their names are easily confused with the
functions that were moved to keymgmt_meth.c, we rename them so they
all start with evp_keymgmt_util_.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11006)
The various functions in bn_const.c return primes that are
specified for use in DH. However they were not being excluded from
a no-dh build - and was therefore causing the build to fail.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10990)
It is better, safer and smaller to let the library routine handle the
strlen(3) call.
Added a note to the documentation suggesting this.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11019)
To support Intel CET, all indirect branch targets must start with
endbranch. Here is a patch to add endbranch to all function entries
in x86 assembly codes which are indirect branch targets as discovered
by running openssl testsuite on Intel CET machine and visual inspection.
Since x86 cbc.pl uses indirect branch with a jump table, we also need
to add endbranch to all jump targets.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10984)
The minimum size argument to CRYPTO_secure_malloc_init() was an int but ought
to be a size_t since it is a size.
From an API perspective, this is a change. However, the minimum size is
verified as being a positive power of two and it will typically be a small
constant.
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from #11003)
A check was present as to what operation is performed with this
context. It may have been useful at some point, but isn't any more.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10947)
Because the libcrypto code has relinquished control of exact words to
express padding mode choices, we re-implement them in the appropriate
provider implementation.
For the sake of legacy controls, we maintain support for the numeric
form of the padding mode, but leave that support otherwise undeclared.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10947)
It turns out this was never necessary, as the implementation should
always check the default digest size anyway.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10947)
This function did a bit too much in terms of central control, actually
more so than the legacy counterpart, where all the string processing
is done in the diverse *_pmeth.c. Furthermore, there was no room
whatsoever for control keys that libcrypto isn't centrally aware of.
This function is changed to simply translating keys and values to
OSSL_PARAM form and then sent on their merry way to the provider
implementations through EVP_PKEY_CTX_set_params(). It translates
selected well known legacy names to their core name counterpart, and
that's as far as centralized control should extend.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10947)
If we hit an EOF while reading in libssl then we will report an error
back to the application (SSL_ERROR_SYSCALL) but errno will be 0. We add
an error to the stack (which means we instead return SSL_ERROR_SSL) and
therefore give a hint as to what went wrong.
Contains a partial fix for #10880
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/10907)
Use of the low level ECDSA and EC_KEY_METHOD functions has been informally discouraged for a
long time. We now formally deprecate them.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10960)
Use of the low level ECDH functions has been informally discouraged for a
long time. We now formally deprecate them.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10960)
Usage of `NID_undef` symbol without including its definition was causing
a build fail
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10996)
This reverts commit 1f457256ce.
This is causing Travis failures.
[extended tests]
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10989)
The solution to incorporate the SM2 identity processing was an off
the side hack that more or less duplicated the ASN1_item_verify()
code with just a few lines being different. We replace this with
a new function ASN1_item_verify_ctx(), which takes an EVP_MD_CTX
pointer instead of an EVP_PKEY pointer, just like its sibling
ASN1_item_sign_ctx().
This allows us to refactor X509_verify() and X509_REQ_verify() to
simply create a local EVP_MD_CTX and an attached EVP_PKEY_CTX,
which gets to hold the SM2 identity, if there is one, and then let
ASN1_item_verify_ctx() to its job.
This will also make it easier to adapt ASN1_item_verify_ctx() for
provider based keys.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/10942)
This makes it possible to generate SM2 parameters and keys like this:
EVP_PKEY_CTX *pctx = EVP_PKEY_CTX_new_id(EVP_PKEY_SM2);
EVP_PKEY *pkey = EVP_PKEY_new();
EVP_PKEY_keygen_init(pctx);
EVP_PKEY_keygen(pctx, pkey);
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/10942)
This means that when loaded or created, EC EVP_PKEYs with the SM2
curve will be regarded as EVP_PKEY_SM2 type keys by default.
Applications are no longer forced to check and fix this.
It's still possible, for those who want this, to set the key type to
EVP_PKEY_EC and thereby run the normal EC computations with the SM2
curve. This has to be done explicitly.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/10942)
