Properly fallback to the default implementation on CPUs
missing necessary instructions.
Fixes#19163
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19182)
Also constify X509_REQ_get0_pubkey() and X509_REQ_check_private_key().
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18930)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18931)
The current code has issues when sizeof(long) <> sizeof(size_t). The two
types are assumed to be interchangeable and them being different will
cause crashes and endless loops.
This fix limits the maximum chunk size for many of the symmetric ciphers
to 2^30 bytes. This chunk size limits the amount of data that will
be encrypted/decrypted in one lump. The code internally handles block
of data later than the chunk limit, so this will present no difference
to the caller. Any loss of efficiency due to limiting the chunking to
1Gbyte rather than more should be insignificant.
Fixes Coverity issues:
1508498, 1508500 - 1508505, 1508507 - 1508527, 1508529 - 1508533,
1508535 - 1508537, 1508539, 1508541 - 1508549, 1508551 - 1508569 &
1508571 - 1508582.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18997)
Fixes#16721
This uses AES-ECB to create a counter mode AES-CTR32 (32bit counter, I could
not get AES-CTR to work as-is), and GHASH to implement POLYVAL. Optimally,
there would be separate polyval assembly implementation(s), but the only one
I could find (and it was SSE2 x86_64 code) was not Apache 2.0 licensed.
This implementation lives only in the default provider; there is no legacy
implementation.
The code offered in #16721 is not used; that implementation sits on top of
OpenSSL, this one is embedded inside OpenSSL.
Full test vectors from RFC8452 are included, except the 0 length plaintext;
that is not supported; and I'm not sure it's worthwhile to do so.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18693)
Also add early clobber for two-insn bswap.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18827)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18668)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/18668)
When assigning pointers to functions in an OSSL_DISPATCH table, we try
to ensure that those functions are properly defined or declared with
an extra declaration using the corresponding function typedefs that
are defined by include/openssl/core_dispatch.h.
For the core dispatch table, found in crypto/provider_core.c, it seems
we forgot this habit, and thus didn't ensure well enough that the
function pointers that are assigned in the table can actually be used
for those dispatch table indexes.
This change adds all the missing declarations, and compensates for
differences with functions that do the necessary casting, making those
explicit rather than implicit, thereby trying to assure that we know
what we're doing.
One function is not fixed in this change, because there's a controversy,
a clash between the signature of BIO_ctrl() and OSSL_FUNC_BIO_ctrl_fn.
They have different return types.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18198)
And move ROTATE inline asm to header.
Now this benefits SM3, SHA (when with Zbb only and no Zknh)
and other hash functions
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18287)
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18429)
This improves the performance of this function and the ones that rely on it
(ossl_lh_strcasehash primarily).
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/18344)
These routines make use of the rev8 instruction in the Zbb extension
to accelerate byte-swapping when OpenSSL is built specifically for
a machine that supports Zbb.
Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Signed-off-by: Henry Brausen <henry.brausen@vrull.eu>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17640)
RISC-V cpuid implementation allows bitmanip extensions Zb[abcs] to
be enabled at runtime using OPENSSL_riscvcap environment variable.
For example, to specify 64-bit RISC-V with the G,C,Zba,Zbb,Zbc
extensions, one could write: OPENSSL_riscvcap="rv64gc_zba_zbb_zbc"
Architecture string parsing is still very primitive, but can be
expanded in the future. Currently, only bitmanip extensions Zba, Zbb,
Zbc and Zbs are supported.
Includes implementation of constant-time CRYPTO_memcmp in riscv64 asm,
as well as OPENSSL_cleanse. Assembly implementations are written using
perlasm.
Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Signed-off-by: Henry Brausen <henry.brausen@vrull.eu>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17640)
Otherwise the implementation is unnecessarily duplicated in legacy.so.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18282)
These functions are unused and untested. They are also implemented rather
inefficiently. If we ever needed them in the future, they'd almost surely
need to be rewritten more efficiently.
Fixes#18227
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18237)
evp_method_store_flush() and evp_method_store_remove_all_provided()
only cover EVP operations, but not encoders, decoders and store loaders.
This adds corresponding methods for those as well. Without this, their
method stores are never cleaned up when the corresponding providers are
deactivated or otherwise modified.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18151)
This adds ossl_method_store_remove_all_provided(), which selectively
removes methods from the given store that are provided by the given
provider.
This also adds the EVP specific evp_method_store_remove_all_provided(),
which matches ossl_method_store_remove_all_provided() but can also
retrieve the correct store to manipulate for EVP functions.
This allows us to modify ossl_provider_self_test() to do the job it's
supposed to do, but through clearly defined functions instead of a
cache flushing call that previously did more than that.
ossl_provider_deactivate() is also modified to remove methods associated
with the deactivated provider, and not just clearing the cache.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18151)
When evp_method_store_flush() flushed the query cache, it also freed
all methods in the EVP method store, through an unfortunate call of
ossl_method_store_flush_cache() with an argument saying that all
methods should indeed be dropped.
To undo some of the confusion, ossl_method_store_flush_cache() is
renamed to ossl_method_store_cache_flush_all(), and limited to do
only that. Some if the items in the internal ALGORITHM structure are
also renamed and commented to clarify what they are for.
Fixes#18150
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18151)
Fixes#16947
Also refactor out algctx freeing into a separate function.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18105)
This patch optimizes SM4 for ARM processor using ASIMD instruction
It will improve performance if both of following conditions are met:
1) Input data equal to or more than 4 blocks
2) Cipher mode allows parallelism, including ECB,CTR,GCM or CBC decryption
This patch implements SM4 SBOX lookup in vector registers, with the
benefit of constant processing time over existing C implementation.
It is only enabled for micro-architecture N1/V1. In the ideal scenario,
performance can reach up to 2.7X
When either of above two conditions is not met, e.g. single block input
or CFB/OFB mode, CBC encryption, performance could drop about 50%.
The assembly code has been reviewed internally by ARM engineer
Fangming.Fang@arm.com
Signed-off-by: Daniel Hu <Daniel.Hu@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17951)
CLI changes: New parameter -digest to CLI command openssl cms, to
provide pre-computed digest for use with -sign.
API changes: New function CMS_final_digest(), like CMS_final() but
uses a pre-computed digest instead of computing it from the data.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/15348)
This refactors OSSL_LIB_CTX to avoid using CRYPTO_EX_DATA. The assorted
objects to be managed by OSSL_LIB_CTX are hardcoded and are initialized
eagerly rather than lazily, which avoids the need for locking on access
in most cases.
Fixes#17116.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17881)
Partial fix for #17064. Avoid excessive writes to the cache line
containing the refcount for an EVP_MD object to avoid extreme
cache contention when using a single EVP_MD at high frequency on
multiple threads. This changes performance in 3.0 from being double
that of 1.1 to only slightly higher than that of 1.1.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17857)
This header files are included by multiple other headers.
It's better to add define guards to prevent multi-inclusion.
Adhere to the coding style, all preprocessor directives inside
the guards gain a space.
Signed-off-by: Weiguo Li <liwg06@foxmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/17666)
Fixes#13944
Moved "opt_printf_stderr" out of apps.c to avoid duplicate definition in tests.
Added function "asn1_string_to_time_t" including tests.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17645)
Add copyright to files that were missing it.
Update license from OpenSSL to Apache as needed.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17606)
The private key for rsa, dsa, dh and ecx was being included when the
selector was just the public key. (ec was working correctly).
This matches the documented behaviour.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17200)
Increase the block numbers to 8 for every iteration. Increase the hash
table capacity. Make use of EOR3 instruction to improve the performance.
This can improve performance 25-40% on out-of-order microarchitectures
with a large number of fast execution units, such as Neoverse V1. We also
see 20-30% performance improvements on other architectures such as the M1.
Assembly code reviewd by Tom Cosgrove (ARM).
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15916)
Assembly code reviewed by Shricharan Srivatsan <ssrivat@us.ibm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16854)
This patch implements the SM4 optimization for ARM processor,
using SM4 HW instruction, which is an optional feature of
crypto extension for aarch64 V8.
Tested on some modern ARM micro-architectures with SM4 support, the
performance uplift can be observed around 8X~40X over existing
C implementation in openssl. Algorithms that can be parallelized
(like CTR, ECB, CBC decryption) are on higher end, with algorithm
like CBC encryption on lower end (due to inter-block dependency)
Perf data on Yitian-710 2.75GHz hardware, before and after optimization:
Before:
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes 16384 bytes
SM4-CTR 105787.80k 107837.87k 108380.84k 108462.08k 108549.46k 108554.92k
SM4-ECB 111924.58k 118173.76k 119776.00k 120093.70k 120264.02k 120274.94k
SM4-CBC 106428.09k 109190.98k 109674.33k 109774.51k 109827.41k 109827.41k
After (7.4x - 36.6x faster):
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes 16384 bytes
SM4-CTR 781979.02k 2432994.28k 3437753.86k 3834177.88k 3963715.58k 3974556.33k
SM4-ECB 937590.69k 2941689.02k 3945751.81k 4328655.87k 4459181.40k 4468692.31k
SM4-CBC 890639.88k 1027746.58k 1050621.78k 1056696.66k 1058613.93k 1058701.31k
Signed-off-by: Daniel Hu <Daniel.Hu@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17455)
This fixes "undefined reference to `aes_gcm_dec_128_kernel' in function
`armv8_aes_gcm_decrypt'" and similar
Fixes#16949
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16951)
In all initializing functions for functionality that use an EVP_PKEY, the
coded logic was to find an KEYMGMT implementation first, and then try to
find the operation method (for example, SIGNATURE implementation) in the
same provider.
This implies that in providers where there is a KEYMGMT implementation,
there must also be a SIGNATURE implementation, along with a KEYEXCH,
ASYM_CIPHER, etc implementation.
The intended design was, however, the opposite implication, i.e. that
where there is a SIGNATURE implementation, there must also be KEYMGMT.
This change reverses the logic of the code to be closer to the intended
design.
There is a consequence; we now use the query_operation_name function from
the KEYMGMT of the EVP_PKEY given by the EVP_PKEY_CTX (ultimately given by
the application). Previously, we used the query_operation_name function
from the KEYMGMT found alongside the SIGNATURE implementation.
Another minor consequence is that the |keymgmt| field in EVP_PKEY_CTX
is now always a reference to the KEYMGMT of the |pkey| field if that
one is given (|pkey| isn't NULL) and is provided (|pkey->keymgmt|
isn't NULL).
Fixes#16614
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16725)
A header file was missing but only in no-deprecated builds.
Also add some ending comments for #if preprocessor statements.
Move function declaration inside #ifdef guard for header.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16412)
Previously the length of the SM2 plaintext could be incorrectly calculated.
The plaintext length was calculated by taking the ciphertext length and
taking off an "overhead" value.
The overhead value was assumed to have a "fixed" element of 10 bytes.
This is incorrect since in some circumstances it can be more than 10 bytes.
Additionally the overhead included the length of two integers C1x and C1y,
which were assumed to be the same length as the field size (32 bytes for
the SM2 curve). However in some cases these integers can have an additional
padding byte when the msb is set, to disambiguate them from negative
integers. Additionally the integers can also be less than 32 bytes in
length in some cases.
If the calculated overhead is incorrect and larger than the actual value
this can result in the calculated plaintext length being too small.
Applications are likely to allocate buffer sizes based on this and therefore
a buffer overrun can occur.
CVE-2021-3711
Issue reported by John Ouyang.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
ASN.1 strings may not be NUL terminated. Don't assume they are.
CVE-2021-3712
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
Calls to the API function EVP_default_properties_enable_fips() will
automatically attempt to load the default config file if it is not
already loaded. Therefore this function should not be called from inside
code to process the config file.
Fixes#16165
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16168)
It is possible to have a custom EVP_PKEY_METHOD implementation without
having an engine. In those cases we were failing to use that custom
implementation.
Fixes#16088
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16118)
Fixes#16010
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16011)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15974)
If there are keymgmts and en/decoders from the same provider, try to
combine them first.
This avoids unnecessary export/import dances, and also tries to avoid
issues where the keymgmt doesn't fully support exporting and importing,
which we can assume will be the case for HSM protected keys.
Fixes#15932
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15933)
This is refactored to use inner_ossl_decoder_fetch() without any given
name, which is just there to ensure all decoder implementations are
made into methods, and then use ossl_method_store_do_all() to list
them all.
This also adds the internal ossl_decoder_do_all_prefetched(), which
can be used if pre-fetching needs to be done separately from listing
all the decoder implementations, or if listing may happen multiple
times.
Fixes#15538Fixes#14837
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15604)
Previously all the SubjectPublicKeyInfo decoders were specific to a key
type. We would iterate over all them until a match was found for the correct
key type. Each one would fully decode the key before then testing whether
it was a match or not - throwing it away if not. This was very inefficient.
Instead we introduce a generic SubjectPublicKeyInfo decoder which figures
out what type of key is contained within it, before subsequently passing on
the data to a key type specific SubjectPublicKeyInfo decoder.
Fixes#15646
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15662)
Fixes#5430
Added the configuration file option "date_opt" to the openssl applications ca,
crl and x509.
Added ASN1_TIME_print_ex which supports the new datetime format using the
flag ASN1_DTFLGS_ISO8601
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14384)
The function pem_read_bio_key_legacy() is a fallback route if we
failed to load a key via a provider. We should be using the legacy
specific d2i functions to force legacy otherwise we end up using a
provider anyway
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15504)
Unfortunately in terms of fips.sources this does not mean much
given the way how the .h files are added via the dependency
information from the compiler.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15622)
For functions that exist in 1.1.1 provide a simple aliases via #define.
Fixes#15236
Functions with OSSL_DECODER_, OSSL_ENCODER_, OSSL_STORE_LOADER_,
EVP_KEYEXCH_, EVP_KEM_, EVP_ASYM_CIPHER_, EVP_SIGNATURE_,
EVP_KEYMGMT_, EVP_RAND_, EVP_MAC_, EVP_KDF_, EVP_PKEY_,
EVP_MD_, and EVP_CIPHER_ prefixes are renamed.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15405)
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14587)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15535)
The new names are ossl_err_load_xxx_strings.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15446)
pointers to provider size algorithm contexts.
Fixes#14284
The gettable_ctx_params methods were confusingly passing a 'provctx' and
a provider context which are completely different objects.
Some objects such as EVP_KDF used 'data' while others such as EVP_MD used 'provctx'.
For libcrypto this 'ctx' is an opaque ptr returned when a providers algorithm
implementation creates an internal context using a new_ctx() method.
Hence the new name 'algctx'.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15275)
If the DRBG is used within the scope of the FIPS OSSL_provider_init
function then it attempts to register a thread callback via c_thread_start.
However the implementation of c_thread_start assumed that the provider's
provctx was already present. However because OSSL_provider_init is still
running it was actually NULL. This means the thread callback fail to work
correctly and a memory leak resulted.
Instead of having c_thread_start use the provctx as the callback argument
we change the definition of c_thread_start to have an explicit callback
argument to use.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15278)
We previously took an EVP_KEYMGMT pointer, but now found it necessary
to use a different import function in some cases. Since that's the
only thing we use from EVP_KEYMGMT, we might as well pass the import
function directly, allowing for some flexibility in how export_to is
used.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15293)
Where a child libctx is in use it needs to know what the current global
properties are.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15242)
If you don't have the base or default providers loaded and therefore there
are no encoders/decoders or store loaders then the error messages can be
cryptic. We provide better hints about how to fix the problem.
Fixes#13798
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15306)
This is a minimal version of pull request #15053 including all the
proposed improvements to the HTTP client API and its documentation
but only those code adaptations strictly needed for it.
The proposed new features include
* support for persistent connections (keep-alive),
* generalization to arbitrary request and response types, and
* support for streaming BIOs for request and response data.
The related API changes include:
* Split the monolithic OSSL_HTTP_transfer() into OSSL_HTTP_open(),
OSSL_HTTP_set_request(), a lean OSSL_HTTP_transfer(), and OSSL_HTTP_close().
* Split the timeout functionality accordingly and improve default behavior.
* Extract part of OSSL_HTTP_REQ_CTX_new() to OSSL_HTTP_REQ_CTX_set_expected().
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15147)
Add EVP_PKEY_gen(), EVP_PKEY_Q_gen(), EVP_RSA_gen(), and EVP_EC_gen().
Also export auxiliary function OSSL_EC_curve_nid2name()
and improve deprecation info on RSA and EC key generation/management functions.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/14695)
Also add hints to SHA256_Init.pod and CHANGES.md how to replace SHA256() etc.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14741)
It was a mistake to allow relative paths for include files (just
like root shouldn't have "." in its PATH), but we probably can't
change it now. Add a new pragma "abspath" that someone can put
in the system-wide config file to require absolute paths.
Also update the config documentation to better explain how file
inclusion works.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15090)
Fix dh_rfc5114 option in genpkey.
Fixes#14145Fixes#13956Fixes#13952Fixes#13871Fixes#14054Fixes#14444
Updated documentation for app to indicate what options are available for
DH and DHX keys.
DH and DHX now have different keymanager gen_set_params() methods.
Added CHANGES entry to indicate the breaking change.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14883)
So far, decoder implementations would return true (1) for a successful
decode all the way, including what the callback it called returned,
and false (0) in all other cases.
This construction didn't allow to stop to decoding process on fatal
errors, nor to choose what to report in the provider code.
This is now changed so that decoders implementations are made to
return false only on errors that should stop the decoding process from
carrying on with other implementations, and return true for all other
cases, even if that didn't result in a constructed object (EVP_PKEY
for example), essentially making it OK to return "empty handed".
The success of the decoding process is now all about successfully
constructing the final object, rather than about the return value of
the decoding chain. If no construction is attempted, the central
decoding processing code concludes that whatever the input consisted
of, it's not supported by the available decoder implementations.
Fixes#14423
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14834)
The low-level engine and app method based keys have to be treated
as foreign and must be used with old legacy pmeths.
Fixes#14632
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14859)
Add a "where did this EVP_{CIPHER,MD} come from" flag: global, via fetch,
or via EVP_{CIPHER,MD}_meth_new. Update EVP_{CIPHER,MD}_free to handle all
three origins. The flag is deliberately right before some function pointers,
so that compile-time failures (int/pointer) will occur, as opposed to
taking a bit in the existing "flags" field. The "global variable" flag
is non-zero, so the default case of using OPENSSL_zalloc (for provider
ciphers), will do the right thing. Ref-counting is a no-op for
Make up_ref no-op for global MD and CIPHER objects
Deprecate EVP_MD_CTX_md(). Added EVP_MD_CTX_get0_md() (same semantics as
the deprecated function) and EVP_MD_CTX_get1_md(). Likewise, deprecate
EVP_CIPHER_CTX_cipher() in favor of EVP_CIPHER_CTX_get0_cipher(), and add
EVP_CIPHER_CTX_get1_CIPHER().
Refactor EVP_MD_free() and EVP_MD_meth_free() to call new common
evp_md_free_int() function.
Refactor EVP_CIPHER_free() and EVP_CIPHER_meth_free() to call new common
evp_cipher_free_int() function.
Also change some flags tests to explicit test == or != zero. E.g.,
if (flags & x) --> if ((flags & x) != 0)
if (!(flags & x)) --> if ((flags & x) == 0)
Only done for those lines where "get0_cipher" calls were made.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14193)
To avoid mutating key data add OSSL_FUNC_KEYMGMT_DUP function
to the provider API and implement it for all asym-key key
managements.
Use it when copying everything to an empty EVP_PKEY
which is the case with EVP_PKEY_dup().
Fixes#14658
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/14793)
A failure to obtain a lock would have resulted in much badness, now it results
in a failure return.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14773)
This corresponds to the |info| field in EVP_PKEY_ASN1_METHOD, as well
as the generic use of OBJ_nid2ln() as a one line description.
We also add the base functionality to make use of this field.
Fixes#14514
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14656)
Fixes#14401
Note that this moves the public key check out of DH compute_key() since
key validation does not belong inside this primitive..
The check has been moved to the EVP_PKEY_derive_set_peer() function so that
it generally applies to all exchange operations.. Use EVP_PKEY_derive_set_peer_ex()
to disable this behaviour.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14717)
Fixes#14730
CLA: The author has the permission to grant the OpenSSL Team the right to use this change.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14729)
In 1.1.1 the ctrl EVP_PKEY_CTRL_RSA_KEYGEN_BITS would fail immediately
if the number of bits was too small. In 3.0 it always succeeds, and only
fails later during the key generation stage.
We fix that so that it fails early like it used to in 1.1.1.
Note that in 1.1.1 it fails with a -2 return code. That is not the case
in 3.0 and has not been addressed here (see #14442)
Fixes#14443
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14702)
'typedef struct ecx_key_st ECX_KEY' was defined multiple times.
It is defined inside include/crypto/types.h which is included from include/crypto/ecx.h.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14693)
Use OSSL_DECODER to decode the PKCS8 data to create provided keys.
If that fails fallback to the legacy implementation.
Fixes#14302
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14659)
We also rename it to d2i_PrivateKey_legacy(), to match d2i_PrivateKey_decoder()
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14314)
To make this cleaner, decoder_ms2key.c is split into decoder_msblob2key.c
and decoder_pvk2key.c.
This required a great deal of refactoring of crypto/pem/pvkfmt.c, to
make cleaner internal functions that our decoder implementations can
use.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14314)
This required refactoring a number of functions from the diverse
EVP_PKEY_ASN1_METHOD implementations to become shared backend
functions. It also meant modifying a few of them to return pointers
to our internal RSA / DSA/ DH / EC_KEY, ... structures instead of
manipulating an EVP_PKEY pointer directly, letting the caller do the
latter.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14314)
This makes it possible to use d2i_<TYPE>_PUBKEY instead of the generic
d2i_PUBKEY()
This required adding a number of new d2i_<TYPE>_PUBKEY functions.
These are all kept internal.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14314)
All 3 files that included crypto/siphash.h also included siphash_local.h,
and no other files included siphash_local.h independently. They probably
should be just one header file.
Fixes#14360
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14558)
Fixes#14480
An internal flag that is set during param gen was not being tested, so
the wrong type was used to select the dsa domain param validation method.
In the default provider - if no gen_type is set then by default the fips186_4 gentype
will be selected when pbits >=2048 otherwise it selects fips186_2.
The fips provider ignores the gen_type and always uses fips186_4.
Before this change dsa used fips186_2 by default in the default
provider.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14508)
OTC have decided that the EVP_PKEY_get0* functions should have a const
return type. This is a breaking change to emphasise that these values
should be considered as immutable.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14319)
If someone calls an EVP_PKEY_get0*() function then we create a legacy
key and cache it in the EVP_PKEY - but it doesn't become an "origin" and
it doesn't ever get updated. This will be documented as a restriction of
the EVP_PKEY_get0*() function with provided keys.
Fixes#14020
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14319)
The legacy support will not be removed in 3.0. Remove the
related TODO 3.0 marks.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14404)
Partial fix for #12964
This adds ossl_ names for the following symbols:
ec_*, ecx_*, ecdh_*, ecdsa_*, sm2_*
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14231)
Partial fix for #12964
This adds ossl_ names for the following symbols:
dsa_check_pairwise, dsa_check_params, dsa_check_priv_key, dsa_check_pub_key, dsa_check_pub_key_partial,
dsa_do_sign_int, dsa_ffc_params_fromdata,
dsa_generate_ffc_parameters, dsa_generate_public_key,
dsa_get0_params, dsa_key_fromdata, dsa_new_with_ctx, dsa_pkey_method, dsa_sign_int
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14231)
