SHA1 is now in security level 0. SHA1 is required for DTLSv1.1. Therefore
ssl_test_new needed some adjustments in the event that DTLSv1.2 is disabled.
There are also adjustments required if using the FIPS module and DTLSv1.2
is disabled. The only DTLS version supported by the FIPS module is
DTLSv1.2.
Fixes #14956
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15047)
SHA1 is now in security level 0. SHA1 is required for DTLSv1.1. Therefore
sslapitest needed some adjustments in the event that DTLSv1.2 is disabled.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15047)
SHA1 is now in security level 0. SHA1 is required for DTLSv1.1. Therefore
dtlstest needed some adjustments in the event that DTLSv1.2 is disabled.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15047)
We test that sending a Finished message instead of a ClientHello results
in an unexpected message error.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14930)
Check that we don't see any threading issues when loading/unloading a
provider from multiple threads.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15010)
The X509 version APIs return the numerical values of the version
numbers, which are one off from the names. This is a bit confusing.
Where they don't get it wrong (accidentally making an "X509v4"
certificate), callers tend to try commenting every call site to explain
the mismatch, including in OpenSSL itself.
Define constants for these values, so code can be self-documenting and
callers are nudged towards the right values.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14549)
Disabling memleaktest under MSVC because leak detection is not a supported feature with MSVC's AddressSanitizer. Leaving ASan enabled in this case causes a test failure because the test suite is expecting the leak to be detected.
CLA: trivial
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14581)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15018)
The replacement functions EVP_PKEY_eq() and EVP_PKEY_parameters_eq()
already exist.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/14997)
Fix dh_rfc5114 option in genpkey.
Fixes#14145Fixes#13956Fixes#13952Fixes#13871Fixes#14054Fixes#14444
Updated documentation for app to indicate what options are available for
DH and DHX keys.
DH and DHX now have different keymanager gen_set_params() methods.
Added CHANGES entry to indicate the breaking change.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14883)
Some keys with groups that aren't supported by FIPS were still used
for Derive stanzas, even when testing with the FIPS provider.
This was due to the flaw in evp_keymgmt_util_try_import() that meant
that even though the key was invalid for FIPS, it could still come
through, because the imported keydata wasn't cleared on import error.
With that flaw corrected, these few Derive stanzas start failing.
We mitigate this by making of "offending" Derive stanzas only
available with the default provider.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/15008)
One of the KDFs and one of the MACs use DES as an underlying algorithm in some
tests. Separate these out into their own files which are conditionally excluded.
Fixes#14958
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14975)
In this case, there was a slight different error output format that wasn't
being accounted for in the error test.
Fixes#14961
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14976)
The TLS curves test strong assumes that TLS 1.2 and TLS 1.3 are present.
It is only conditioned out if TLS 1.2 isn't. This changes also conditions
it out if TLS 1.3 isn't present.
Fixes ##14965
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14978)
The evp_extra_test program was trying to validate these curves when they were
not build.
Fixes#14959
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14977)
CLA: trivial
Signed-off-by: MichaM <contact-micha+github@posteo.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14879)
In function test_EVP_PKEY_ffc_priv_pub, params is freed via OSSL_PARAM_free() at line 577.
If the condition at line 581 is true, the execution will goto err, and params will be freed again at line 630.
The same problem also happens at line 593 and line 609, which causes two double free bugs.
Bugs reported by @Yunlongs
Fixes 14916
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14921)
Fixes#14902
Also add workaround of `sudo hostname localhost` for the
intermittent test failures seen in CI.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/14872)
Also includes testing for OSSL_LIB_CTX_get0_global_default().
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14890)
One was related to probing for the combination of signature and hash
algorithm together. This is currently not easily possible. The TODO(3.0)
is converted to a normal comment and I've raised the problem as issue
number #14885 as something to resolve post 3.0.
The other TODO was a hard coded limit on the number of groups that could
be registered. This has been amended so that there is no limit.
Fixes#14333
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14886)
Because of aliases, retrieved names won't always match one specific
string. A safer way to check is to fetch the digest from the
retrieved name and check it's the expected one with the help of
EVP_MD_is_a().
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14498)
When test cases were added with ADD_ALL_TESTS_NOSUBTEST(), all those
iteration verdicts were summarized as if it was one single case. This
modification gets each iteration verdict displayed separately instead.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14498)
Add a "where did this EVP_{CIPHER,MD} come from" flag: global, via fetch,
or via EVP_{CIPHER,MD}_meth_new. Update EVP_{CIPHER,MD}_free to handle all
three origins. The flag is deliberately right before some function pointers,
so that compile-time failures (int/pointer) will occur, as opposed to
taking a bit in the existing "flags" field. The "global variable" flag
is non-zero, so the default case of using OPENSSL_zalloc (for provider
ciphers), will do the right thing. Ref-counting is a no-op for
Make up_ref no-op for global MD and CIPHER objects
Deprecate EVP_MD_CTX_md(). Added EVP_MD_CTX_get0_md() (same semantics as
the deprecated function) and EVP_MD_CTX_get1_md(). Likewise, deprecate
EVP_CIPHER_CTX_cipher() in favor of EVP_CIPHER_CTX_get0_cipher(), and add
EVP_CIPHER_CTX_get1_CIPHER().
Refactor EVP_MD_free() and EVP_MD_meth_free() to call new common
evp_md_free_int() function.
Refactor EVP_CIPHER_free() and EVP_CIPHER_meth_free() to call new common
evp_cipher_free_int() function.
Also change some flags tests to explicit test == or != zero. E.g.,
if (flags & x) --> if ((flags & x) != 0)
if (!(flags & x)) --> if ((flags & x) == 0)
Only done for those lines where "get0_cipher" calls were made.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14193)
Change:
EVP_RAND_gettable_ctx_params -> EVP_RAND_CTX_gettable_params
EVP_RAND_settable_ctx_params -> EVP_RAND_CTX_settable_params
Which brings them in line with the other similar functions for other algorithm
types.
Fixes#14880
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14893)
Adds a mapping from "digestsize" to "size" for setting a param.
Fixes#14370
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14850)
We use type elsewhere and documenting the 'first' in the
name of the call is a little bit superfluous making the
name too mouthful.
Also rename EVP_PKEY_typenames_do_all to
EVP_PKEY_type_names_do_all to keep the words separated by
underscore.
Fixes#14701
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14868)
Fixes#14808
Validation checks were moved into EVP_PKEY_derive_set_peer() which broke
an external negative test. Originally the old code was semi working by checking the peers public key was in the range of other parties p. It was not actually ever
checking that the domain parameters were consistent between the 2
parties. It now checks the parameters match as well as validating the
peers public key.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14823)
It's possible to set an invalid protocol list that will be sent in a
ClientHello. This validates the inputs to make sure this does not
happen.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14815)
Fixes#14807
Compliance with IG 9.4 requires that an inverse cipher function be
tested if one is implemented. Just running AES_GCM encrypt/decrypt does not meet this
requirement (Since only ECB, CBC, XTS, KW, KWP support the inverse
function during decryption mode).
Added a mode to the cipher test so that the AES_GCM only does an encrypt
and AES_ECB only does a decrypt. TDES still does both.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14825)
OTC recently voted that EVP_PKEY types will be immutable in 3.0. This
means that EVP_PKEY_set_alias_type can no longer work and should be
removed entirely (applications will need to be rewritten not to use it).
It was primarily used for SM2 which no longer needs this call.
Applications should generate SM2 keys directly (without going via an EC
key first), or otherwise when loading keys they should automatically be
detected as SM2 keys.
Fixes#14379
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14803)
It has always been the case that KTLS is not compiled by default. However
if it is compiled then it was automatically used unless specifically
configured not to. This is problematic because it avoids any crypto
implementations from providers. A user who configures all crypto to use
the FIPS provider may unexpectedly find that TLS related crypto is actually
being performed outside of the FIPS boundary.
Instead we change KTLS so that it is disabled by default.
We also swap to using a single "option" (i.e. SSL_OP_ENABLE_KTLS) rather
than two separate "modes", (i.e. SSL_MODE_NO_KTLS_RX and
SSL_MODE_NO_KTLS_TX).
Fixes#13794
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14799)
This is necessary to keep compatibility with 1.1.1 implementation
of the CBC, OFB, and CFB mode ciphers.
Fixes#14704
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14811)
These functions are prerequisites for implementing EVP_PKEY_todata().
OSSL_PARAM_dup() is required to make a deep copy of the exported
params (since the provider export() uses a OSSL_PARAM_BLD which throws away the
data after the call), and then use OSSL_PARAM_merge() to add some additional params
that can be passed to the EVP_PKEY_todata().
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14785)
Windows builds show the following warning:
(..\apps\ca.c(2643): warning C4267: 'function': conversion
from 'size_t' to 'int', possible loss of data)
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14453)
X509_VERIFY_PARAM_inherit() now copies hostflags independently of hosts.
Previously hostflags were only copied when at least one host was set.
Typically applications don't configure hosts on SSL_CTX. The change
enables applications to configure hostflags on SSL_CTX and have OpenSSL
copy the flags from SSL_CTX to SSL.
Fixes: https://github.com/openssl/openssl/issues/14579
Signed-off-by: Christian Heimes <christian@python.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14743)
It's been deemed unlikely that these will end up in OpenSSL error
records, so we simply don't test them if they happen to be among the
error codes that perl has support for.
Fixes#14763
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14779)
Fixes#14401
Note that this moves the public key check out of DH compute_key() since
key validation does not belong inside this primitive..
The check has been moved to the EVP_PKEY_derive_set_peer() function so that
it generally applies to all exchange operations.. Use EVP_PKEY_derive_set_peer_ex()
to disable this behaviour.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14717)
In 1.1.1 the ctrl EVP_PKEY_CTRL_RSA_KEYGEN_BITS would fail immediately
if the number of bits was too small. In 3.0 it always succeeds, and only
fails later during the key generation stage.
We fix that so that it fails early like it used to in 1.1.1.
Note that in 1.1.1 it fails with a -2 return code. That is not the case
in 3.0 and has not been addressed here (see #14442)
Fixes#14443
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14702)
There's no point in specifying them separately, since they're the same.
Also the OFB-AES192.Decrypt vectors specified the wrong operation, so we
were running some encryption tests twice and missing some decryption
tests.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14625)
AIX has permission problems of the form:
lsof: can't open /dev/mem: Permission denied
lsof: can't open /dev/kmem: Permission denied
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14692)
Name mixups cleared, and a few more test case result files that
arent't removed, making forensics on failed tests easier.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14505)
Fixes#14481
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14684)
Use OSSL_DECODER to decode the PKCS8 data to create provided keys.
If that fails fallback to the legacy implementation.
Fixes#14302
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14659)
We perform a reneg handshake, where the second ClientHello drops the
sig_algs extension. It must also contain cert_sig_algs for the test to
work.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
To improve debug information in case of test failures source
file and line arguments are added to test callbacks.
Fixes#14331
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14567)
with AVX512_IFMA + AVX512_VL instructions, primarily for RSA CRT private key
operations. It uses 256-bit registers to avoid CPU frequency scaling issues.
The performance speedup for RSA2k signature on ICL is ~2x.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13750)
Fixes#14559
The intitial implementation of the gets() function tried using the next bio's gets() function.
For a file BIO this returned incorrect data for binary data containing 0x00.
Just buffering all data during gets() did not work however since some
applications open and close the bio multiple times when dealing with pem
files containing multiple entries.. This does not work
when reading from stdin unless the data if buffered one byte at a time.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14599)
There are a few test cases at the end of test/recipes/30-test_evp.t,
which are designed to check that loading DSA keys when DSA is disabled,
or SM2 keys when SM2 is disables fail in an understandable way. These
needed a small adjustment.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14314)
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14582)
This requires changing semantics of the keymgmt_has()
function a little in the sense that it now returns 1
if the selection has no meaning for the key type. It
was already doing so for ECX keys for example.
The keymgmt_validate function semantics is changed
similarly to allow passing validation on the same
selection that the key returns 1 for.
Fixes#14509
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14511)
All 3 files that included crypto/siphash.h also included siphash_local.h,
and no other files included siphash_local.h independently. They probably
should be just one header file.
Fixes#14360
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14558)
In test_property_query_value_create() we depend on the property
values to not be created by other test cases. Use such
values.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14573)
Without this, it is necessary to query an algorithm before setting the default
property query. With this, the value will be created and the default will
work.
Fixes#14516
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/14542)
RSA keys have no parameters and pass EVP_PKEY_param_check(). Previously,
ECX keys had no parammeters and failed EVP_PKEY_param_check(). We should
be consistent. It makes more sense to always pass, and therefore this
commit implements that behaviour.
Fixes#14482
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/14485)
Fixes#14480
An internal flag that is set during param gen was not being tested, so
the wrong type was used to select the dsa domain param validation method.
In the default provider - if no gen_type is set then by default the fips186_4 gentype
will be selected when pbits >=2048 otherwise it selects fips186_2.
The fips provider ignores the gen_type and always uses fips186_4.
Before this change dsa used fips186_2 by default in the default
provider.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14508)
Fixes#14390
The only caller of this function tests EVP_KEYMGMT_is_a() beforehand
which will fail if the RSA key types do not match. So the test is not
necessary. The assert has been removed when it does the test.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14524)
Some functions that lock things are void, so we just return early.
Also make ossl_namemap_empty return 0 on error. Updated the docs, and added
some code to ossl_namemap_stored() to handle the failure, and updated the
tests to allow for failure.
Fixes: #14230
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14238)
There might be more because internal instances of the DRBG
might be initialized for the first time and thus
self-tested as well.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14497)
Let the files remain to make test forensics easy
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/14484)
Providers (particularly the FIPS provider) needs access to BIOs from libcrypto.
Libcrypto is allowed to change the internal format of the BIO structure and it
is still expected to work with providers that were already built. This means
that the libcrypto BIO must be distinct from and not castable to the provider
side OSSL_CORE_BIO.
Unfortunately, this requirement was broken in both directions. This fixes
things by forcing the two to be different and any casts break loudly.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14419)
Fixes#13185Fixes#13352
Removed the existing code in file_store that was trying to figure out the
input type.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14407)
A trivial PR to remove some commonly repeated words. It looks like this is
not the first PR to do this.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14420)
If we have TLSv1.3 enabled then we must have at least one TLSv1.3 capable
group available. This check was not always working
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/14430)
OTC have decided that the EVP_PKEY_get0* functions should have a const
return type. This is a breaking change to emphasise that these values
should be considered as immutable.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14319)
Most of these were already deprecated but a few have been missed. This
commit corrects that.
Fixes#14303Fixes#14317
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14319)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14319)
Allow absolute paths for $SRCTOP and $BLDTOP.
Do not build the gost_engine in tree.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/14416)
