Add a -provider option to allow providers to be loaded. This option can be
specified multiple times.
Add a -provider_path option to allow the path to providers to be specified.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11167)
Remove "Valid options" label, since all commands have sections (and
[almost] always the first one is "General options").
Have "list --options" ignore section headers
Reformat ts's additional help
Add output section
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9953)
Everything in apps includes apps.h, because that one declares apps
internal library routines. However, progs.h doesn't declare library
routines, but rather the main commands and their options, and there's
no reason why the library modules should include it.
So, remove the inclusion of progs.h from apps.h and add that inclusion
in all command source files.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5222)
Standardized the -rand flag and added a new one:
-rand file...
Always reads the specified files
-writerand file
Always writes to the file on exit
For apps that use a config file, the RANDFILE config parameter reads
the file at startup (to seed the RNG) and write to it on exit if
the -writerand flag isn't used.
Ensured that every app that took -rand also took -writerand, and
made sure all of that agreed with all the documentation.
Fix error reporting in write_file and -rand
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/3862)
Instead, make it possible to disable the console reader that's part of
the UI module. This makes it possible to use the UI API and other UI
methods in environments where the console reader isn't useful.
To disable the console reader, configure with 'no-ui-console' /
'disable-ui-console'.
'no-ui' / 'disable-ui' is now an alias for 'no-ui-console' /
'disable-ui-console'.
Fixes#3806
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3820)
Mostly braces and NULL pointer check and also copyright year bump
Signed-off-by: Paul Yang <paulyang.inf@gmail.com>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3657)
In apps/apps.c, one can set up an engine with setup_engine().
However, we freed the structural reference immediately, which means
that for engines that don't already have a structural reference
somewhere else (because it's a built in engine), we end up returning
an invalid reference.
Instead, the function release_engine() is added, and called at the end
of the routines that call setup_engine().
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1643)
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1694)
Add new function PEM_write_bio_PrivateKey_traditional() to enforce the
use of legacy "traditional" private key format. Add -traditional option
to pkcs8 and pkey utilities.
Reviewed-by: Matt Caswell <matt@openssl.org>
Make PKCS8_PRIV_KEY_INFO opaque. Several accessor functions already exist
for this structure. Two new ones were added to handle attributes.
The old handling of broken formats has been removed and the corresponding
structures simplified.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Implement range-checking in all counts in apps. Turns out only a couple
of cases were missing. And make the range-checking code more strict.
Replace almost all opt_ulong() calls with opt_long()
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Loading the config file after processing command line options can
cause problems, e.g. where an engine provides new ciphers/digests
these are not then recoginised on the command line. Move the
default config file loading to before the command line option
processing. Whilst we're doing this we might as well centralise
this instead of doing it individually for each application. Finally
if we do it before the OpenSSL_add_ssl_algorithms() call then
ciphersuites provided by an engine (e.g. GOST) can be available to
the apps.
RT#4085
RT#4086
Reviewed-by: Richard Levitte <levitte@openssl.org>
The different apps had the liberty to decide whether they would open their
input and output files in binary mode or not, which could be confusing if
two different apps were handling the same type of file in different ways.
The solution is to centralise the decision of low level file organisation,
and that the apps would use a selection of formats to state the intent of
the file.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Most of all, we needed to sort out which ones are binary and which
ones are text, and make sure they are treated accordingly and
consistently so
Reviewed-by: Tim Hudson <tjh@openssl.org>
This does 64-bit division and multiplication, and on 32-bit platforms
pulls in libgcc symbols (and MSVC does similar) which may not be
available. Mostly done by David Woodhouse.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
When generating a private key, try to make the output file be readable
only by the owner. Put it in CHANGES file since it might be noticeable.
Add "int private" flag to apps that write private keys, and check that it's
set whenever we do write a private key. Checked via assert so that this
bug (security-related) gets fixed. Thanks to Viktor for help in tracing
the code-paths where private keys are written.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
The module loading feature got broken a while ago, so restore it, but
have it a bit more explicit this time around.
Reviewed-by: Stephen Henson <steve@openssl.org>
Add support for PKCS#8 private key encryption using the scrypt algorithm
in the pkcs8 utility. Update documentation.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This adds a new function which will encrypt a private key using PKCS#8
based on an X509_ALGOR structure and reimplements PKCS8_encrypt to use it.
Update pkcs8 utlity to use PKCS8_set0_pbe.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Make setup_engine be a dummy if NO_ENGINE is enabled.
The option is not enabled if NO_ENGINE is enabled, so the one "wasted"
variable just sits there. Removes some variables and code.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This is merges the old "rsalz-monolith" branch over to master. The biggest
change is that option parsing switch from cascasding 'else if strcmp("-foo")'
to a utility routine and somethin akin to getopt. Also, an error in the
command line no longer prints the full summary; use -help (or --help :)
for that. There have been many other changes and code-cleanup, see
bullet list below.
Special thanks to Matt for the long and detailed code review.
TEMPORARY:
For now, comment out CRYPTO_mem_leaks() at end of main
Tickets closed:
RT3515: Use 3DES in pkcs12 if built with no-rc2
RT1766: s_client -reconnect and -starttls broke
RT2932: Catch write errors
RT2604: port should be 'unsigned short'
RT2983: total_bytes undeclared #ifdef RENEG
RT1523: Add -nocert to fix output in x509 app
RT3508: Remove unused variable introduced by b09eb24
RT3511: doc fix; req default serial is random
RT1325,2973: Add more extensions to c_rehash
RT2119,3407: Updated to dgst.pod
RT2379: Additional typo fix
RT2693: Extra include of string.h
RT2880: HFS is case-insensitive filenames
RT3246: req command prints version number wrong
Other changes; incompatibilities marked with *:
Add SCSV support
Add -misalign to speed command
Make dhparam, dsaparam, ecparam, x509 output C in proper style
Make some internal ocsp.c functions void
Only display cert usages with -help in verify
Use global bio_err, remove "BIO*err" parameter from functions
For filenames, - always means stdin (or stdout as appropriate)
Add aliases for -des/aes "wrap" ciphers.
*Remove support for IISSGC (server gated crypto)
*The undocumented OCSP -header flag is now "-header name=value"
*Documented the OCSP -header flag
Reviewed-by: Matt Caswell <matt@openssl.org>
Add option to set an alternative to the default hmacWithSHA1 PRF
for PKCS#8 private key encryptions. This is used automatically
by PKCS8_encrypt if the nid specified is a PRF.
Add option to pkcs8 utility.
Update docs.
(cherry picked from commit b60272b01f)
