Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20109)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20109)
RISC-V already has a couple of routines to accelerate cryptographic
calculations using ISA extensions. Let's add a cross-compile target
that allows the CI to test this code.
The new defined machine is a rv64gc machine with
* all Bitmanip extensions (Zb*)
* all Scalar Crypto extensions (Zk*)
This selection matches the supported RISC-V extensions in OpenSSL.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20107)
The cross-compile CI tests use cross-compilers for building
and QEMU for testing. This implies that testing of ISA extension
for HW accelerated cryptographic calculations is undefined
(it depends on arch-specific QEMU defaults and arch-specific
detection mechanisms in OpenSSL).
Let's add a mechanism to set two environment variables, that allow
to control the ISA extensions:
* QEMU_CPU: used by QEMU to specify CPU capabilities of the emulation
* OPENSSL_*: used by OpenSSL (on some architectures) to enable ISA
extensions.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20107)
The by_dir certificate/CRL lookup code uses an OPENSSL_STACK to track
how many sequentially numbered CRL files have been loaded for a given
X509_NAME hash which is being requested. This avoids loading already
loaded CRL files and repeated stat() calls.
This OPENSSL_STACK is searched using sk_find, however this mutates
the OPENSSL_STACK unless it is known to be sorted. This operation
therefore requires a write lock, which was not taken.
Fix this issue by sorting the OPENSSL_STACK whenever it is mutated. This
guarantees no mutation will occur during sk_find. This is chosen over
taking a write lock during sk_find as retrieving a CRL by X509_NAME is
assumed to be a hotter path than the case where a new CRL is installed.
Also optimise the code by avoiding creating the structure to track the
last CRL file sequence number in the circumstance where it would match
the initial value, namely where no CRL with the given hash is installed.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20076)
Some ciphers/protocol versions have an explicit IV. We need to make sure we
have sufficient room for it in the underlying buffer.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20085)
Test that sending large app data records works correctly.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20085)
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20095)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20052)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19391)
To this end, tweak the internal handling of ctx->total_timeout.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19391)
Clarify behavior of OSSL_CMP_CTX_set_option() when given (negative)
values for OSSL_CMP_OPT_MSG_TIMEOUT or OSSL_CMP_OPT_TOTAL_TIMEOUT.
Fix doc of -msg_timeout and -total_timeout in openssl-cmp.pod.in
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19391)
Current man page indicates the function returns an int while it returns
a long.
Fixes#20096.
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20097)
RAND_bytes_ex() can also return 0 on failure. Other callers do check
this correctly. Change the check from <0 to <=0.
Fixes: #20100
CLA: trivial
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20106)
Context parameter OSSL_SIGNATURE_PARAM_NONCE_TYPE can now also be
retrieved for ECDSA and DSA.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20070)
to avoid inheriting Linux's linker flags (ie -Wl,-z,defs)
now targetting OpenBSD.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13393)
Test included
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20033)
We test with binary input of length 1, length 0, and NULL input with length 0
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20033)
This allows calls with s==NULL and len==0 to be safe. It probably already
was, but address sanitizers could still complain.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20033)
Byte swapping code incorrectly uses the number of AES rounds to swap expanded
AES key, while swapping only a single dword in a loop, resulting in swapped
key and partially swapped expanded keys, breaking AES encryption and
decryption on VIA Padlock hardware.
This commit correctly sets the number of swapping loops to be done.
Fixes#20073
CLA: trivial
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20077)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/20023)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/20023)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/20023)
CONNECTION_CLOSE frames can be generated on multiple ELs, so the TX
packetiser was generating it on multiple ELs simultaneously. This fixes
the CONNECTION_CLOSE generation logic so that the lowest non-dropped EL
is always used.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19734)
The other implementations of i2r return 0 in case of an error, but
i2r_ADMISSION_SYNTAX() returns -1. That means the check on i2r does not
catch the error. Change it to return 0 like the others do.
Fixes: #20066
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20068)
CPACF does not support pre-hashing. This was considered correctly for
Ed25519ph, but not for Ed448ph which lead to errors in the test_evp suite
(test vector 20 - pre-hashing without context string). Fix this by using the
non-accelerated version of Ed448 also if no context string is provided, but
pre-hashing is performed.
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20067)
In EC key generation, if allocation of struct ec_gen_ctx fails, values
provided by parameters are copied into the context at represented by a NULL
pointer. To fix this, prevent copy if allocation fails.
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20055)
Fixes#19718Fixes#19716
Added PKCS12_SAFEBAG_get1_cert_ex(), PKCS12_SAFEBAG_get1_crl_ex() and
ASN1_item_unpack_ex().
parse_bag and parse_bags now use the libctx/propq stored in the P7_CTX.
PKCS12_free() needed to be manually constructed in order to free the propq.
pkcs12_api_test.c changed so that it actually tests the libctx, propq.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19942)
CPACF does not directly support xofs. Emulate this by using single block
operations on an empty input block.
Fixes: affc070aab ("s390x: Optimize kmac")
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19983)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20019)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20035)
Otherwise the alloca can cause an exception.
Issue reported by Jiayi Lin.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20005)
