Provide EC serializers for text, pem and der.
EC parameters use ANS1 'CHOICE' - which means they are more embedded than other parameters used by
other KEY types (which normally have a SEQUENCE at the top level).
For this reason the ANS1_STRING type that was being passed around has been changed to a void so that the
code can still be shared with EC.
The EC serializer only supports named curves currently.
NOTE the serializer code assumes PKCS8 format - if the older encode methods are needed they will need to be
added in another PR. (Probably when deserialization is considered).
EVP_PKEY_key_fromdata_init was changed from using a keypair selection to all bits of a key. A side effect of this was
that the very restrictive checks in the ecx code needed to be relaxed as it was assuming all selection flags were non
optional. As this is not the case for any other key the code has been modified.
Fixed a bug in legacy_ctrl_str_to_params() - "ecdh_cofactor_mode" was being incorrectly converted to the wrong keyname.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11107)
Provide serializers for X25519 and X448 for text, pem and der. There are
no parameter serializers because there are no parameters for these
algorithms.
Add some documentation about the various import/export types available
Add additional testing for the serializers
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11095)
Property "default" no longer exists, replace "default=yes" with
"provider=default"
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11150)
This includes legacy PSS controls to params conversion, and an attempt
to generalise the parameter names when they are suitable for more than
one operation.
Also added crypto/rsa/rsa_aid.c, containing proper AlgorithmIdentifiers
for known RSA+hash function combinations.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10557)
Replace the properties default, fips and legacy with a single property
called "provider". So, for example, instead of writing "default=yes" to
get algorithms from the default provider you would instead write
"provider=default". We also have a new "fips" property to indicate that
an algorithm is compatible with FIPS mode. This applies to all the
algorithms in the FIPS provider, as well as any non-cryptographic
algorithms (currently only serializers).
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11097)
Use of the low level DH functions has been informally discouraged for a
long time. We now formally deprecate them.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11024)
Use of the low level RSA functions has been informally discouraged for a
long time. We now formally deprecate them.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11063)
For EC keys it is particularly important to avoid leaking the bit length
of the secret scalar.
Key import/export should never leak the bit length of the secret
scalar in the key.
For this reason, on export we use padded BIGNUMs with fixed length,
using the new `ossl_param_bld_push_BN_pad()`.
When importing we also should make sure that, even if short lived,
the newly created BIGNUM is marked with the BN_FLG_CONSTTIME flag as
soon as possible, so that any processing of this BIGNUM might opt for
constant time implementations in the backend.
Setting the BN_FLG_CONSTTIME flag alone is never enough, we also have
to preallocate the BIGNUM internal buffer to a fixed size big enough
that operations performed during the processing never trigger a
realloc which would leak the size of the scalar through memory
accesses.
Fixed length
------------
The order of the large prime subgroup of the curve is our choice for
a fixed public size, as that is generally the upper bound for
generating a private key in EC cryptosystems and should fit all valid
secret scalars.
For padding on export we just use the bit length of the order
converted to bytes (rounding up).
For preallocating the BIGNUM storage we look at the number of "words"
required for the internal representation of the order, and we
preallocate 2 extra "words" in case any of the subsequent processing
might temporarily overflow the order length.
Future work
-----------
To ensure the flag and fixed size preallocation persists upon
`EC_KEY_set_private_key()`, we need to further harden
`EC_KEY_set_private_key()` and `BN_copy()`.
This is done in separate commits.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10631)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10631)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10631)
Embed libctx in dsa and dh objects and cleanup internal methods to not pass libctx (This makes it consistent with the rsa changes)
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10910)
RSA ASYM_CIPHER was already available within the default provider. We
now make it also available from inside the FIPS module.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10881)
Don't attempt to build ecx related source files in a "no-ec" build.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11065)
Use of the low level DSA functions has been informally discouraged for a
long time. We now formally deprecate them.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10977)
When setting up the hash function for DSA signature, the encoded
AlgorithmIdentifier for the DSA+hash combination is queried, but not
stored, which leads to problems when signing ASN.1 items in libcrypto.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11037)
Compile failures were occuring on systems that weren't AESNI capable
because the detection wasn't quite right in a couple of files.
This fixes a run-checker build failure for the 386 compile option.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11022)
Don't attempt to self-test DES in the FIPS provider if we have been built
without FIPS support.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11034)
The same go for the pairs import + import_types and export + export_types.
This required some additional changes in our KEYMGMT implementations.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11006)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11006)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11006)
The various functions in bn_const.c return primes that are
specified for use in DH. However they were not being excluded from
a no-dh build - and was therefore causing the build to fail.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10990)
Minor fixes to resolve compilation errors with the no-multiblock
Configure option.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11004)
Refactor the DSA SIGNATURE digest setup to be uniform, and to happen
in two places:
1. when given through the digestsign and digestverify inits
2. when given through the set_ctx_params function.
When setting up the digest, we also check that the digest is one of
the officially accepted for DSA.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10947)
Because the libcrypto code has relinquished control of exact words to
express padding mode choices, we re-implement them in the appropriate
provider implementation.
For the sake of legacy controls, we maintain support for the numeric
form of the padding mode, but leave that support otherwise undeclared.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10947)
It turns out this was never necessary, as the implementation should
always check the default digest size anyway.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10947)
The code was calling EVP_MD_meth_free which is incorrect. It should call
EVP_MD_free. It happened to work but by luck rather than design.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10973)
Use of the low level HMAC functions has been informally discouraged for a
long time. We now formally deprecate them.
Applications should instead use EVP_MAC_CTX_new(3), EVP_MAC_CTX_free(3),
EVP_MAC_init(3), EVP_MAC_update(3) and EVP_MAC_final(3).
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10836)
Use of the low level CMAC functions has been informally discouraged for a
long time. We now formally deprecate them.
Applications should instead use EVP_MAC_CTX_new(3), EVP_MAC_CTX_free(3),
EVP_MAC_init(3), EVP_MAC_update(3) and EVP_MAC_final(3).
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10836)
The function EVP_PKEY_CTX_new_from_pkey() infers the name of the
algorithm to fetch from the EVP_PKEY that has been supplied as an
argument. But there was no way to specify properties to be used during
that fetch.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10926)
Use of the low level DES functions has been informally discouraged for a
long time. We now formally deprecate them.
Applications should instead use the EVP APIs, e.g. EVP_EncryptInit_ex,
EVP_EncryptUpdate, EVP_EncryptFinal_ex, and the equivalently named decrypt
functions.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10858)
We've started to see "magic" numbers being used for certain sizes,
such as algorithm names and property query strings.
This change takes care of the few items where buffers for algorithm
names and property query strings are used.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10928)
The common routine ossl_prov_print_labeled_bignum() didn't print the
BIGNUM quite the way it should. It treated the limbs in a big endian
fashion, when they are really organised in a little endian fashion.
Furthermore, we make it inherit the behaviour from the print of legacy
keys, where a number starting with the high bit set gets an extra zero
printed first.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10891)
