The output C code was made to use ERR_func_error_string() to see if a
string table was already loaded or not. Since this function returns
NULL always, this check became useless.
Change it to use ERR_reason_error_string() instead, as there's no
reason to believe we will get rid of reason strings, ever.
To top it off, we rebuild all affected C sources.
Fixes#9756
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9756)
If a TLSv1.3 server configured to respond to the status_request extension
also attempted to send a CertificateRequest then it was incorrectly
inserting a non zero length status_request extension into that message.
The TLSv1.3 RFC does allow that extension in that message but it must
always be zero length.
In fact we should not be sending the extension at all in that message
because we don't support it.
Fixes#9767
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9780)
In commit 2d263a4a73 ("Honour mandatory digest on private key in
has_usable_cert()" I added two checks for the capabilities of the
EVP_PKEY being used. One of them was wrong, as it should only be
checking the signature of the X.509 cert (by its issuer) against the
sigalgs given in a TLS v1.3 signature_algorithms_cert extension.
Remove it and provide the code comments which, if they'd been present
in the first place, would hopefully have prevented the mistake.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9672)
Quite a few adaptations are needed, most prominently the added code
to allow provider based MACs.
As part of this, all the old information functions are gone, except
for EVP_MAC_name(). Some of them will reappear later, for example
EVP_MAC_do_all() in some form.
MACs by EVP_PKEY was particularly difficult to deal with, as they
need to allocate and deallocate EVP_MAC_CTXs "under the hood", and
thereby implicitly fetch the corresponding EVP_MAC. This means that
EVP_MACs can't be constant in a EVP_MAC_CTX, as their reference count
may need to be incremented and decremented as part of the allocation
or deallocation of the EVP_MAC_CTX. It may be that other provider
based EVP operation types may need to be handled in a similar manner.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8877)
Recent changes to the assembler defines meant that they weren't being
set for libssl code. This resulted in the multiblock code never being
used.
Fixes#9571
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9574)
Fix a few places where calling ossl_isdigit does the wrong thing on
EBCDIC based systems.
Replaced with ascii_isdigit.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9556)
The function SSL_check_chain() can be used by applications to check that
a cert and chain is compatible with the negotiated parameters. This could
be useful (for example) from the certificate callback. Unfortunately this
function was applying TLSv1.2 sig algs rules and did not work correctly if
TLSv1.3 was negotiated.
We refactor tls_choose_sigalg to split it up and create a new function
find_sig_alg which can (optionally) take a certificate and key as
parameters and find an appropriate sig alg if one exists. If the cert and
key are not supplied then we try to find a cert and key from the ones we
have available that matches the shared sig algs.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9442)
At some point in the past do_ssl3_write() used to return the number of
bytes written, or a value <= 0 on error. It now just returns a success/
error code and writes the number of bytes written to |tmpwrit|.
The SSL_MODE_RELEASE_BUFFERS code was still looking at the return code
for the number of bytes written rather than |tmpwrit|. This has the effect
that the buffers are not released when they are supposed to be.
Fixes#9490
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9505)
If compiled with 'no-deprecated', ERR_put_error() is undefined. We
had one spot where we were using it directly, because the file and
line information was passed from elsewhere.
Fortunately, it's possible to use ERR_raise() for that situation, and
call ERR_set_debug() immediately after and thereby override the
information that ERR_raise() stored in the error record.
util/mkerr.pl needed a small adjustment to not generate code that
won't compile in a 'no-deprecated' configuration.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9452)
tls_parse_stoc_key_share was generating a new EVP_PKEY public/private
keypair and then overrides it with the server public key, so the
generation was a waste anyway. Instead, it should create a
parameters-only EVP_PKEY.
(This is a consequence of OpenSSL using the same type for empty key,
empty key with key type, empty key with key type + parameters, public
key, and private key. As a result, it's easy to mistakenly mix such
things up, as happened here.)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/9445)
Change SYSerr to have the function name; remove SYS_F_xxx defines
Add a test and documentation.
Use get_last_socket_err, which removes some ifdef's in OpenSSL code.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9072)
Also, use define rather than sizeof
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9377)
Deprecate all xxx_F_ defines.
Removed some places that tested for a specific function.
Use empty field for the function names in output.
Update documentation.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9058)
It was only ever in cert_st because ssl_st was a public structure
and could not be modified without breaking the API. However, both
structures are now opaque, and thus we can freely change their layout
without breaking applications. In this case, keeping the shared
sigalgs in the SSL object prevents complications wherein they would
inadvertently get cleared during SSL_set_SSL_CTX() (e.g., as run
during a cert_cb).
Fixes#9099
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9157)
This reverts commit 524006dd1b.
While this change did prevent the sigalgs from getting inadvertently
clobbered by SSL_set_SSL_CTX(), it also caused the sigalgs to not be
set when the cert_cb runs. This, in turn, caused significant breakage,
such as SSL_check_chain() failing to find any valid chain. An alternate
approach to fixing the issue from #7244 will follow.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9157)
Instead of referencing the return size from the OSSL_PARAM structure, make the
size a field within the structure.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9135)
The previous 2 commits moved supported groups and ciphers out of the
session object to avoid race conditions. We now also move ecpointformats
for consistency. There does not seem to be a race condition with access
to this data since it is only ever set in a non-resumption handshake.
However, there is no reason for it to be in the session.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9162)
Similarly to the previous commit we were storing the peer offered list
of ciphers in the session. In practice there is no need for this
information to be avilable from one resumption to the next since this
list is specific to a particular handshake. Since the session object is
supposed to be immutable we should not be updating it once we have decided
to resume. The solution is to remove the session list out of the session
object.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9162)
In TLSv1.3 the supported groups can be negotiated each time a handshake
occurs, regardless of whether we are resuming or not. We should not store
the supported groups information in the session because session objects
can be shared between multiple threads and we can end up with race
conditions. For most users this won't be seen because, by default, we
use stateless tickets in TLSv1.3 which don't get shared. However if you
use SSL_OP_NO_TICKET (to get stateful tickets in TLSv1.3) then this can
happen.
The answer is to move the supported the supported group information into
the SSL object instead.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9162)
Make sure that the combination of no-ec with no-dh builds successfully.
If neither ec or dh are available then TLSv1.3 is not possible.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9156)
Now that we have TLSv1.3 FFDHE support there is no reason why we should
not allow TLSv1.3 to be used in a no-ec build. This commit enables that
to happen.
It also fixes no-ec which was previously broken.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9156)
The recent TLSv1.3 FFDHE support missed a few OPENSSL_NO_DH guards.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9153)
This is still required currently by engines and digestsign/digestverify.
This PR contains merged in code from Richard Levitte's PR #9126.
[extended tests]
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9103)
Making the default cipher strings a function gives the library more
control over the defaults. Potentially allowing a change in the
future as ciphers become deprecated or dangerous.
Also allows third party distributors to change the defaults for their
installations.
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8686)
covID 1445689 Resource leak (in error path)
covID 1445318 Resource leak (in test - minor)
covID 1443705 Unchecked return value (Needed if CRYPTO_atomic_add() was used)
covID 1443691 Resource leak (in app - minor)
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9071)
Move digest code into the relevant providers (fips, default, legacy).
The headers are temporarily moved to be internal, and will be moved
into providers after all external references are resolved. The deprecated
digest code can not be removed until EVP_PKEY (signing) is supported by
providers. EVP_MD data can also not yet be cleaned up for the same reasons.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8763)
If we receive a KeyUpdate message (update requested) from the peer while
we are in the middle of a write, we should defer sending the responding
KeyUpdate message until after the current write is complete. We do this
by waiting to send the KeyUpdate until the next time we write and there is
no pending write data.
This does imply a subtle change in behaviour. Firstly the responding
KeyUpdate message won't be sent straight away as it is now. Secondly if
the peer sends multiple KeyUpdates without us doing any writing then we
will only send one response, as opposed to previously where we sent a
response for each KeyUpdate received.
Fixes#8677
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/8773)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9010)
This function only returns a status and does not modify the parameter.
Since similar function are already taking const parameters, also
change this function to have a const parameter.
Fixes#8934
CLA: trivial
Signed-off-by: Arne Schwabe <arne@rfc2549.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8945)
This commit adds the SSL_sendfile call, which allows KTLS sockets to
transmit file using zero-copy semantics.
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8727)
Introduce a macro that allows all structure alignment tricks to be rolled up
into a single place.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8845)
With the removal of SSLv2, the s3 structure is always allocated, so
there is little point in having it be an allocated pointer. Collapse
the ssl3_state_st structure into ssl_st and fixup any references.
This should be faster than going through an indirection and due to
fewer allocations, but I'm not seeing any significant performance
improvement; it seems to be within the margin of error in timing.
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7888)
