Implement the two requirements about limiting closing transmission size to
no more than thrice the received size.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21429)
Running LSX instructions requires both the hardware support and the
kernel support. The `cpucfg` instruction only tests the hardware
support, causing a SIGILL if the hardware supports LSX but the kernel
does not.
Use `getauxval(AT_HWCAP)` as the ["Software Development and Build
Convention for LoongArch Architectures"][1] manual suggests.
The LOONGARCH_HWCAP_LSX and LOONGARCH_HWCAP_LASX bits are copied from
the manual too. In Glibc 2.38 they'll be provided by <sys/auxv.h> as
well, but they are unavailable in earlier Glibc versions so we cannot
rely on it.
The getauxval syscall and Glibc wrapper are available since day one
(Linux-5.19 and Glibc-2.36) for LoongArch.
Fixes#21508.
[1]:https://github.com/loongson/la-softdev-convention/blob/master/la-softdev-convention.adoc#kernel-constraints
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21509)
The DH_check() function checks numerous aspects of the key or parameters
that have been supplied. Some of those checks use the supplied modulus
value even if it is excessively large.
There is already a maximum DH modulus size (10,000 bits) over which
OpenSSL will not generate or derive keys. DH_check() will however still
perform various tests for validity on such a large modulus. We introduce a
new maximum (32,768) over which DH_check() will just fail.
An application that calls DH_check() and supplies a key or parameters
obtained from an untrusted source could be vulnerable to a Denial of
Service attack.
The function DH_check() is itself called by a number of other OpenSSL
functions. An application calling any of those other functions may
similarly be affected. The other functions affected by this are
DH_check_ex() and EVP_PKEY_param_check().
CVE-2023-3446
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21451)
QUIC error code, frame type and reason is in error data
Fixes#21337
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21476)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21467)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21135)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21135)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21135)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21135)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21135)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21135)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21135)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21135)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21135)
Make sure PN duplicate suppression is side-channel safe by doing
the duplicate test after AEAD verification.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21135)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21135)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21135)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21135)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21135)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21135)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21135)
The most expensive part of using a PKEY decoder is the
OSSL_DECODER_CTX_new_for_pkey() call. This builds up all of the decoder
chains, which is a complex and time consuming operation. However, if no
new providers have been loaded/unloaded since the last time it was called
we can expect the same results for the same parameters. Note that this
operation takes place *before* we event parse the data for decoding so it
is not dependent on the parsed data at all.
We introduce a cache for OSSL_DECODER_CTX objects. If we have been called
with the same parameters then we just duplicate an existing
OSSL_DECODER_CTX. This should be significantly faster than creating a new
one every time.
Partially addressed the issue in #15199
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21426)
Signed-off-by: Liu-ErMeng <liuermeng2@huawei.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21425)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21116)
We save the error state from the thread that encountered
a permanent error condition caused by system or internal
error to the QUIC_CHANNEL.
Then we restore it whenever we are returning to a user
call when protocol is shutdown.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21087)
We return SSL_ERROR_SYSCALL when network error is encountered.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21087)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20061)
