Fixes#14808
Validation checks were moved into EVP_PKEY_derive_set_peer() which broke
an external negative test. Originally the old code was semi working by checking the peers public key was in the range of other parties p. It was not actually ever
checking that the domain parameters were consistent between the 2
parties. It now checks the parameters match as well as validating the
peers public key.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14823)
Fixes#14807
Compliance with IG 9.4 requires that an inverse cipher function be
tested if one is implemented. Just running AES_GCM encrypt/decrypt does not meet this
requirement (Since only ECB, CBC, XTS, KW, KWP support the inverse
function during decryption mode).
Added a mode to the cipher test so that the AES_GCM only does an encrypt
and AES_ECB only does a decrypt. TDES still does both.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14825)
It's been deemed unlikely that these will end up in OpenSSL error
records, so we simply don't test them if they happen to be among the
error codes that perl has support for.
Fixes#14763
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14779)
In 1.1.1 the ctrl EVP_PKEY_CTRL_RSA_KEYGEN_BITS would fail immediately
if the number of bits was too small. In 3.0 it always succeeds, and only
fails later during the key generation stage.
We fix that so that it fails early like it used to in 1.1.1.
Note that in 1.1.1 it fails with a -2 return code. That is not the case
in 3.0 and has not been addressed here (see #14442)
Fixes#14443
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14702)
There's no point in specifying them separately, since they're the same.
Also the OFB-AES192.Decrypt vectors specified the wrong operation, so we
were running some encryption tests twice and missing some decryption
tests.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14625)
AIX has permission problems of the form:
lsof: can't open /dev/mem: Permission denied
lsof: can't open /dev/kmem: Permission denied
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14692)
Name mixups cleared, and a few more test case result files that
arent't removed, making forensics on failed tests easier.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14505)
Fixes#14481
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14684)
We perform a reneg handshake, where the second ClientHello drops the
sig_algs extension. It must also contain cert_sig_algs for the test to
work.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Fixes#14559
The intitial implementation of the gets() function tried using the next bio's gets() function.
For a file BIO this returned incorrect data for binary data containing 0x00.
Just buffering all data during gets() did not work however since some
applications open and close the bio multiple times when dealing with pem
files containing multiple entries.. This does not work
when reading from stdin unless the data if buffered one byte at a time.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14599)
There are a few test cases at the end of test/recipes/30-test_evp.t,
which are designed to check that loading DSA keys when DSA is disabled,
or SM2 keys when SM2 is disables fail in an understandable way. These
needed a small adjustment.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14314)
Let the files remain to make test forensics easy
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/14484)
Fixes#13185Fixes#13352
Removed the existing code in file_store that was trying to figure out the
input type.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14407)
Allow absolute paths for $SRCTOP and $BLDTOP.
Do not build the gost_engine in tree.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/14416)
The regression from commit 05458fd was fixed, but there is
no test for that regression. This adds it simply by having
a certificate that we compare for -text output having
a different subject and issuer.
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/14353)
The exception is the test recipe that tests 'openssl fipsinstall'.
However, that one uses a different output file name, so it's safe.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14320)
The EVP_DigestSignInit and EVP_DigestVerifyInit actually have to
be initialized before EVP_PKEY_CTX_ctrl_str is invoked.
Otherwise, when the ctx not initialized, the ctrl command fails.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13828)
The dh->nid was not being set if the loaded p,g matched an inbuilt named
group for "DH".
NOTE: The "DHX" related path already worked since it calls DH_set0_pqg()
(which does the name group check).
This bug was detected when new tests were added for dh5114 groups, combined
with the no-cache tests i.e. loading+import+export set the nid,
but just loading did not.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14207)
The apps helper function load_key_certs_crls() is a general purpose
function for loading different types of objects from a given URI. It
sets up an OSSL_STORE and calls OSSL_STORE_expect() so that the store
knows what type of thing to expect to load. Unfortunately this wasn't
working and was always setting "expect" to 0 - which means "anything".
Fixes#13709
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14191)
Added primality check on p and q in the ossl_ffc_params_simple_validate().
Checking for p and q sizes in the default provider is made more
lenient.
Added two testcases for invalid parameters.
Fixes#13950
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/14148)
genpkey can sometimes create files that fail "openssl dhparam -check". See
issue #14145. We had some instances of such invalid files in the
dhparam_check test. Now that "openssl dhparam -check" has been fixed to
work the same way as it did in 1.1.1 these tests were failing. We move the
invalid files inot the "invalid" directory. A future PR will have to fix
genpkey to not generate invalid files.
We also remove a "SKIP" block that was skipping tests in a no deprecated
build unnecessarily. Nothing being tested is deprecated.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/14146)
This 'special' way of specifying the data should only be used for testing
purposes. It should not be used in production environments.
ACVP passes a blob of DER encoded data for some of the fields rather
than passing them as separate fields that need to be DER encoded.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14077)
Even if EC and DH are disabled then we may still be able to use TLSv1.3
if we have groups that have been plugged in by an external provider.
Fixes#13767
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13916)
Providers produce algorithm IDs of their own, and we need to compare
them against the same thing produced by libcrypto's ASN.1 code and
with legacy keys.
This tester can compare algorithm IDs for signatures and for keys,
given certificates that hold such data.
To verify key algorithm IDs, only one certificate is necessary, and
its public key is used.
To verify certificate algorithm IDs, we need to launch the signature
operation that would verify a certificate against the public key of
its signing CA, so that test needs two files.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14049)
Fixes#13969
- properly handle the mandatory RSA-PSS key parameters
- improve parameter checking when setting the parameters
- compute the algorithm id at the time it is requested so it
reflects the actual parameters set
- when generating keys do not override previously set parameters
with defaults
- tests added to the test_req recipe that should cover the PSS signature
handling
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13988)
Fixes#13656. Right now all openssl commands use a NULL propq. This
patch adds a possibility to specify a custom propq.
The implementation follows the example of set_nameopt/get_nameopt.
Various tools had to be modified to call app_get0_propq after it has
been populated. Otherwise the -propquery has no effect.
The tests then verify the -propquery affects the tool behaviour by
requesting a non-existing property.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13707)
The HTTP-based tests are now in 80_test_cmp_http.t, to start a little earlier.
This should decrease total test run time due to better parallelization.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13551)
EVP_PKEYs may be shared across mutliple threads. For example this is
common for users of libssl who provide a single EVP_PKEY private key for
an SSL_CTX, which is then shared between multiple threads for each SSL
object.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13987)
The dhparam test was failing to properly handle line endings when
running a mingw configured build under wine.
Fixes#13557
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13923)
The client-side cert verification callback function may not only return
as usual for success or 0 for failure, but also -1,
typically on failure verifying the server certificate.
This makes the handshake suspend and return control to the calling application
with SSL_ERROR_WANT_RETRY_VERIFY.
The app can for instance fetch further certificates or cert status information
needed for the verification.
Calling SSL_connect() again resumes the connection attempt
by retrying the server certificate verification step.
This process may even be repeated if need be.
The core implementation of the feature is in ssl/statem/statem_clnt.c,
splitting tls_process_server_certificate() into a preparation step
that just copies the certificates received from the server to s->session->peer_chain
(rather than having them in a local variable at first) and returns to the state machine,
and a post-processing step in tls_post_process_server_certificate() that can be repeated:
Try verifying the current contents of s->session->peer_chain basically as before,
but give the verification callback function the chance to pause connecting and
make the TLS state machine later call tls_post_process_server_certificate() again.
Otherwise processing continues as usual.
The documentation of the new feature is added to SSL_CTX_set_cert_verify_callback.pod
and SSL_want.pod.
This adds two tests:
* A generic test in test/helpers/handshake.c
on the usability of the new server cert verification retry feature.
It is triggered via test/ssl-tests/03-custom_verify.cnf.in (while the bulky auto-
generated changes to test/ssl-tests/03-custom_verify.cnf can be basically ignored).
* A test in test/sslapitest.c that demonstrates the effectiveness of the approach
for augmenting the cert chain provided by the server in between SSL_connect() calls.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13906)
Just comparison of the original parameter file with the -out output.
Some test files have non-canonical encoding, so they are moved
to a different directory.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13139)
- DH support should work with both DH and DHX keys
- UKM parameter is optional so it can have length 0
Fixes#13810
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13869)
Also update documentation regarding sources of certs and keys,
improve type of OSSL_CMP_exec_RR_ses(),
add tests for CSR-based cert revocation
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13841)
Also prevent copying SKID and AKID extension, which make no sense in CSRs
and extend the use -ext to select with extensions are copied.
Further simplifiy the overall structure of the code.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13711)
Perl strings should be compared with 'eq', not '=='.
This only generates a perl warning, so wasn't immediately noticed.
Also, remove the check of disabled 'dsa'. That never made reak sense.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13645)
The initial thought was that only CS1 mode (the NIST variant) was allowed.
The lab has asked if these other modes should be included.
The algorithm form indicates that these are able to be validated.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13639)
We don't need the legacy provider, so don't load it. This avoids
problems in a no-legacy build
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13595)
If the legacy provider isn't available then we shouldn't attempt to
load or use it.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13595)
test_enc should not test ciphers that are not available due to a lack
of the legacy provider
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13595)
In spite of the name the endecoder_legacy_test does not need the
legacy provider. Therefore we avoid loading it so that no-legacy
builds still run the test successfully.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13595)
If we've been configured with no-legacy then we should not attempt to
load the legacy provider.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13595)
This includes a general correction in the code (now using the X509V3_CTX_REPLACE flag)
and adding a prominent clarification in the documentation:
If multiple entries are processed for the same extension name,
later entries override earlier ones with the same name.
This is due to an RFC 5280 requirement - the intro of its section 4.2 says:
A certificate MUST NOT include more than one instance of a particular extension.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13614)
Skip tests that require DSA to be available. While we're doing this
we also remove an OPENSSL_NO_DSA guard in the dhparam app that is no
longer necessary (even though DSA may not be present in our own providers
it could be available via a third party provider).
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13599)
Fixes#13422
ecdsa_set_ctx_params() was not setting the digest correctly. The side
effect noted was that the check for sha1 when signing was not being
done in fips mode.
Also fixed the dupctx() so that propq is deep copied.
The usage of the variable 'flag_allow_md' was also copied from the dsa code.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13520)
The certificate path validation procedure specified in RFC 5280 does not
include checking the validity period of the trusted (root) certificate.
Still it is common good practice to perform this check.
Also OpenSSL did this until commit 0e7b1383e, which accidentally killed it.
The current commit restores the previous behavior.
It also removes the cause of that bug, namely counter-intuitive design
of the internal function check_issued(), which was complicated by checks
that actually belong to some other internal function, namely find_issuer().
Moreover, this commit adds a regression check and proper documentation of
the root cert validity period check feature, which had been missing so far.
Fixes#13427
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13590)
This adds a bit of functionality in ossltest, so it can now be used to
load PEM files. It takes the file name as key ID, but just to make
sure faults aren't ignored, it requires all file names to be prefixed
with 'ot:'.
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/13570)
This adds the -xoflen option to control the output length of the XOF
algorithms, such as SHAKE128 and SHAKE256.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13245)
The X942 KDF had been modified so that it supports all optional fields - not
just the fields used by CMS.
As there are 2 types of KDF for X942 - this has been made a bit clearer
by adding an X942KDF-ASN1 alias. X942KDF-CONCAT has also been added as an
alias of X963KDF.
This work was instigated as a result of the ACVP tests optionally being
able to use keybits for the supp_pubinfo field.
Setting the parameter OSSL_KDF_PARAM_X942_USE_KEYBITS to 0 allows this
to be disabled.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13418)
This very simple module loader is only linked with the standard C
library, so cannot and should not provide any other symbol to the
module it tries to load. It can thereby be used to verify that the
module it tries to load doesn't have any surprising dependencies when
it's supposed to be self contained.
A test recipe is added to verify the FIPS module with this loader.
Fixes#11020
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13507)
The functions return a DH object and therefore need to be deprecated.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13138)
Skip a test that relies on RC2 being present in a no-rc2 build.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13496)
Commit be9d82bb3 inadvertently disabled ciphersuite testing. This masked
some issues. Therefore we fix this testing.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13378)
There have been instances where OSSL_STORE got confused between DSA and
DH params (e.g. see issue #13046) due the DER encoding of DH and DSA params
looking identical. Therefore we test that we get the types that we expect.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13329)
Add tests for various deprecated PEM_read_bio_*() functions to ensure
they can still read the various files.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13329)
Our test data (test/data.txt and test/data2.txt) are text files, but
declaring them binary means that there will be no line ending
transformation done on them. This is necessary for testing on
non-Unix platforms, where certain tests could otherwise give results
that don't match expected results.
Fixes#13474
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13477)
By the time the keygen is called the references to strings inside the
gen ctx are floating pointers. A strdup solves this problem.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13432)
Inside the FIPS module we continue to use FIPS186-4. We prefer FIPS186-2
in the default provider for backwards compatibility reasons.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13228)
Fixes#12627
Changed security check for DSA verification to match SP800-131Ar2 when
the security strength is < 112.
Fixed compilation error when using config opt 'no-fips-securitychecks'
Removed TODO's from 20-test_cli_fips.t - there is no longer an TODO error.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13387)
It checks that all of these functions have a corresponding
OSSL_ENCODER implementation, and that the output is the same:
- i2d_{TYPE}PrivateKey
- i2d_{TYPE}PublicKey
- i2d_{TYPE}params
- i2d_{TYPE}_PUBKEY
- PEM_write_bio_{TYPE}PrivateKey
- PEM_write_bio_{TYPE}PublicKey
- PEM_write_bio_{TYPE}Parameters
- PEM_write_bio_{TYPE}_PUBKEY
It also checks that all of these functions have a corresponding
OSSL_DECODER implementation, and that the decoding result matches:
- d2i_{TYPE}PrivateKey()
- d2i_{TYPE}PublicKey(),
- d2i_{TYPE}params(),
- d2i_{TYPE}_PUBKEY(),
- PEM_read_bio_{TYPE}PrivateKey()
- PEM_read_bio_{TYPE}PublicKey()
- PEM_read_bio_{TYPE}params()
- PEM_read_bio_{TYPE}_PUBKEY()
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13262)
When using `HARNESS_JOBS` to run the tests in parallel, no matter the
level of parallelism that can be used, the monolithic `test_fuzz` takes
a long time to run, conditioning the duration of the whole build.
This commit splits the single `test_fuzz` recipe into separate recipes
for each fuzzer.
The previous mechanism to select individual fuzz tests using the
`FUZZ_TESTS` environment variable is also dropped (and documentation
updated).
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13307)
Aes-xts mode can be optimized by interleaving cipher operation on
several blocks and loop unrolling. Interleaving needs one ideal
unrolling factor, here we adopt the same factor with aes-cbc,
which is described as below:
If blocks number > 5, select 5 blocks as one iteration,every
loop, decrease the blocks number by 5.
If left blocks < 5, treat them as tail blocks.
Detailed implementation has a little adjustment for squeezing
code space.
With this way, for small size such as 16 bytes, the performance is
similar as before, but for big size such as 16k bytes, the performance
improves a lot, even reaches to 2x uplift, for some arches such as A57,
the improvement even reaches more than 2x uplift. We collect many
performance datas on different micro-archs such as thunderx2,
ampere-emag, a72, a75, a57, a53 and N1, all of which reach 0.5-2x uplift.
The following table lists the encryption performance data on aarch64,
take a72, a75, a57, a53 and N1 as examples. Performance value takes the
unit of cycles per byte, takes the format as comparision of values.
List them as below:
A72:
Before optimization After optimization Improve
evp-aes-128-xts@16 8.899913518 5.949087263 49.60%
evp-aes-128-xts@64 4.525512668 3.389141845 33.53%
evp-aes-128-xts@256 3.502906908 1.633573479 114.43%
evp-aes-128-xts@1024 3.174210419 1.155952639 174.60%
evp-aes-128-xts@8192 3.053019303 1.028134888 196.95%
evp-aes-128-xts@16384 3.025292462 1.02021169 196.54%
evp-aes-256-xts@16 9.971105023 6.754233758 47.63%
evp-aes-256-xts@64 4.931479093 3.786527393 30.24%
evp-aes-256-xts@256 3.746788153 1.943975947 92.74%
evp-aes-256-xts@1024 3.401743802 1.477394648 130.25%
evp-aes-256-xts@8192 3.278769327 1.32950421 146.62%
evp-aes-256-xts@16384 3.27093296 1.325276257 146.81%
A75:
Before optimization After optimization Improve
evp-aes-128-xts@16 8.397965173 5.126839098 63.80%
evp-aes-128-xts@64 4.176860631 2.59817764 60.76%
evp-aes-128-xts@256 3.069126585 1.284561028 138.92%
evp-aes-128-xts@1024 2.805962699 0.932754655 200.83%
evp-aes-128-xts@8192 2.725820131 0.829820397 228.48%
evp-aes-128-xts@16384 2.71521905 0.823251591 229.82%
evp-aes-256-xts@16 11.24790935 7.383914448 52.33%
evp-aes-256-xts@64 5.294128847 3.048641998 73.66%
evp-aes-256-xts@256 3.861649617 1.570359905 145.91%
evp-aes-256-xts@1024 3.537646797 1.200493533 194.68%
evp-aes-256-xts@8192 3.435353012 1.085345319 216.52%
evp-aes-256-xts@16384 3.437952563 1.097963822 213.12%
A57:
Before optimization After optimization Improve
evp-aes-128-xts@16 10.57455446 7.165438012 47.58%
evp-aes-128-xts@64 5.418185447 3.721241202 45.60%
evp-aes-128-xts@256 3.855184592 1.747145379 120.66%
evp-aes-128-xts@1024 3.477199757 1.253049735 177.50%
evp-aes-128-xts@8192 3.36768104 1.091943159 208.41%
evp-aes-128-xts@16384 3.360373443 1.088942789 208.59%
evp-aes-256-xts@16 12.54559459 8.745489036 43.45%
evp-aes-256-xts@64 6.542808937 4.326387568 51.23%
evp-aes-256-xts@256 4.62668822 2.119908754 118.25%
evp-aes-256-xts@1024 4.161716505 1.557335554 167.23%
evp-aes-256-xts@8192 4.032462227 1.377749511 192.68%
evp-aes-256-xts@16384 4.023293877 1.371558933 193.34%
A53:
Before optimization After optimization Improve
evp-aes-128-xts@16 18.07842135 13.96980808 29.40%
evp-aes-128-xts@64 7.933818397 6.07159276 30.70%
evp-aes-128-xts@256 5.264604704 2.611155744 101.60%
evp-aes-128-xts@1024 4.606660117 1.722713454 167.40%
evp-aes-128-xts@8192 4.405160115 1.454379201 202.90%
evp-aes-128-xts@16384 4.401592028 1.442279392 205.20%
evp-aes-256-xts@16 20.07084054 16.00803726 25.40%
evp-aes-256-xts@64 9.192647294 6.883876732 33.50%
evp-aes-256-xts@256 6.336143161 3.108140452 103.90%
evp-aes-256-xts@1024 5.62502952 2.097960651 168.10%
evp-aes-256-xts@8192 5.412085608 1.807294191 199.50%
evp-aes-256-xts@16384 5.403062591 1.790135764 201.80%
N1:
Before optimization After optimization Improve
evp-aes-128-xts@16 6.48147613 4.209415473 53.98%
evp-aes-128-xts@64 2.847744115 1.950757468 45.98%
evp-aes-128-xts@256 2.085711968 1.061903238 96.41%
evp-aes-128-xts@1024 1.842014669 0.798486302 130.69%
evp-aes-128-xts@8192 1.760449052 0.713853939 146.61%
evp-aes-128-xts@16384 1.760763546 0.707702009 148.80%
evp-aes-256-xts@16 7.264142817 5.265970454 37.94%
evp-aes-256-xts@64 3.251356212 2.41176323 34.81%
evp-aes-256-xts@256 2.380488469 1.342095742 77.37%
evp-aes-256-xts@1024 2.08853022 1.041718215 100.49%
evp-aes-256-xts@8192 2.027432668 0.944571334 114.64%
evp-aes-256-xts@16384 2.00740782 0.941991415 113.10%
Add more XTS test cases to cover the cipher stealing mode and cases of different
number of blocks.
CustomizedGitHooks: yes
Change-Id: I93ee31b2575e1413764e27b599af62994deb4c96
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11399)
The FIPS provider module doesn't have any encoders, the base provider
is needed for that.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13167)
The offending test checks that fopen("anydir/") fails. This looks fairly platform
specific. For the test involved this creates a file called
"anydir" on an AIX test machine.
This change was introduced on (Sept 24)
29844ea5b3
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13309)
It's perfectlt ok to 'plan skip_all' in a subtest, but in that case,
it must really be inside the subtest.
Fixes#13330
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13331)
Because this test loads the shared libraries dynamically, there are
cases where that results in errors because the ASAN library wasn't
loaded first. That makes this test unsuitable in an ASAN build.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13281)
There is no option to output DH params in DER form. -outform doesn't
apply to -genparam with 'openssl genpkey', and it shouldn't.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13266)
In the interest of finding out what went wrong with a test by looking
at its output, tconversion.pl is modified to take arguments in option
form, and gets an additional -prefix option that callers can use to
ensure output files are uniquely named.
Test recipes are modified to use these new options.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13147)
CLA: trivial
Fixes#12996
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13036)
Also adds error output tests on loading key files with unsupported algorithms to 30-test_evp.t
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13023)
Added Keymanager, signatures, kem, asymciphers and keyexchange.
Added -select option so that specific algorithms are easier to view when using -verbose
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12943)
Now that we have full SM2 support, we can remove some TODOs from the tests.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12913)
We can now re-enable test/recipes/01-test_symbol_presence.t for NonStop.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12962)
For key agreement only NIST curves that have a security strength of 112 bits or more are allowed.
Fixed tests so they obey these restrictions when testing in fips mode.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12745)
In fips mode SHA1 should not be allowed for signing, but may be present for verifying.
Add keysize check.
Add missing 'ossl_unused' to gettable and settable methods.
Update fips related tests that have these restrictions.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12745)
The check is applied only with X509_V_FLAG_X509_STRICT.
Fixes#12139
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12683)
We run two HMAC operations on the same file and confirm that both provide
us with the expected values.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12850)
SP800-56br2 requires seperate KAT's (fips self tests) to be tested for both encryption and decryption
using the RSA primitive (i.e. no padding). This is specified in FIPS140-2 IG D.9
A copy of the methods EVP_PKEY_encrypt_init(), EVP_PKEY_encrypt(), EVP_PKEY_decrypt_init(), EVP_PKEY_decrypt()
are now in the fips module.
Removed the #ifdef FIPS_MODULE in evp_pkey_ctx_free_old_ops().
Added corruption test
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12835)
HPE NonStop Port Changes for 3.0.0 Includes unthreaded, PUT, and SPT for OSS.
The port changes include wrapping where necessary for FLOSS and
appropriate configuration changes to support that. Two tests
are excluded as being inappropriate for the platform.
The changes are:
* Added /usr/local/include to nonstop-nsx_spt_floss to load floss.h
* Added SPT Floss variant for NonStop
* Wrapped FLOSS definitions in OPENSSL_TANDEM_FLOSS to allow selective enablement.
* SPT build configuration for NonStop
* Skip tests not relevant for NonStop
* PUT configuration changes required for NonStop platforms
* Configurations/50-nonstop.conf: updates for TNS/X platform.
* FLOSS instrumentation for HPE NonStop TNS/X and TNS/E platforms.
* Configurations/50-nonstop.conf: modifications for non-PUT TNS/E platform b
* Fix use of DELAY in ssltestlib.c for HPNS.
* Fixed commit merge issues and added floss to http_server.c
CLA: Permission is granted by the author to the OpenSSL team to use these modifications.
Fixes#5087.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12800)
Note that although this is a false positive currently, it could become possible if any of the methods called
change behaviour - so it is safer to add the fix than to ignore it. Added a simple test so that I could prove this was the case.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12847)
On most systems, there is no E macro for errcode zero in <errno.h>,
which means that it seldom comes up here. However, reports indicate
that some platforms do have an E macro for errcode zero.
With perl, errcode zero is a bit special. Perl consistently gives
the empty string for that one, while the C strerror() may give back
something else. The easiest way to deal with that possible mismatch
is to skip this errcode.
Fixes#12798
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12799)
When generating a CRL using the "ca" utility, allow values for the
lastUpdate and nextUpdate fields to be specified using the command line
options -crl_lastupdate and -crl_nextupdate respectively.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12784)
add various checks for malformedness to static check_chain_extensions() in x509_vfc.c
improve error reporting of X509v3_cache_extensions() in v3_purp.c
add error reporting to x509_init_sig_info() in x509_set.c
improve static setup_dp() and related functions in v3_purp.c and v3_crld.c
add test case for non-conforming cert from https://tools.ietf.org/html/rfc8410#section-10.2
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12478)
Add the AuthEnvelopedData as defined in RFC 5083 with AES-GCM
parameter as defined in RFC 5084.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/8024)
Setting a hash function was reserved for signature operations.
However, it turns out that SM2 uses a hash function for encryption and
decryption as well.
Therefore, EVP_PKEY_CTX_md() must be called with an expanded operation
type combination that includes EVP_PKEY_OP_TYPE_CRYPT when used in a
generic way.
For SM2, test/recipes/30-test_evp_data/evppkey_sm2.txt is expanded to
test decryption both with an implicit and an explicit digest.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12789)
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12775)
The fips providers can't be activated alone if encoding, decoding or
STORE are going to be used.
To enable this, we selectively use test/fips-and-base.cnf instead of
test/fips.cnf in our test recipes.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12587)
This file split turned out to be a mistake as soon as the fetching
error reporting got properly sorted.
This reverts commit e6ed04a9dc.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12587)
Some sub-systems and openssl sub-commands do not yet deal cleanly with
purely provider-native EVP_PKEYs. We compensate that by "downgrading"
keys in select places, or ensure that the 'file:' scheme ENGINE loader
is activated.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12587)
We want to perform the same tests with a provider implementation, and
also make sure that an ENGINE implementation works as advertised.
OSSL_STORE_open() / OSSL_STORE_open_wirh_libctx() work in such a way
that they look for internal / engine implementations first, and only
failing that, they will try to fetch a provider implementation. This
ensures that when we do specify an engine, it gets exceptional priority.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12587)
Add positive and negative tests of CLI apps using configuration files
via environment variables to force FIPS mode.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12291)
This was added for backward compatability.
Added EC_GROUP_new_from_params() that supports explicit curve parameters.
This fixes the 15-test_genec.t TODO.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12604)
Fixes#12630
ec_import requires domain parameters to be part of the selection.
The public and private serialisers were not selecting the correct flags so the import was failing.
Added a test that uses the base provider so that a export/import happens for serialization.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12681)
allows loading password-protected PKCS#12 files in x509, ca, s_client, s_server
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12647)
ECC keys with non-NIST group names aren't supported when running with
the FIPS provider.
Keys with such groups that are included in evp_test stanza files
aren't even possible to decode if provider side decoders are used,
since those depend on available EVP_KEYMGMT implementations and what
they support.
Those keys could only be decoded because the legacy decoders were
used.
To make these tests future proof, we separate out the stanzas having
keys with NIST approved group names into separate files, and adjust
the file lists in test/recipes/30-test_evp.t aaccordingly.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12672)
Fixes#12589
The 'type' parameter needed to be propagated to the ffc params during keygen,
so that the simple validation of params done during keygen can handle legacy keys for the default provider.
The fips provider ignores this change and only allows fips186-4 approved sizes.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12623)
We check that EVP_default_properties_is_fips_enabled() is working even
before other function calls have auto-loaded the config file.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12567)
The default and legacy providers currently return 1 for status and self test checks.
Added test to show the 3 different stages the self test can be run (for installation, loading and on demand).
For the fips provider:
- If the on demand self test fails, then any subsequent fetches should also fail. To implement this the
cached algorithms are flushed on failure.
- getting the self test callback in the fips provider is a bit complicated since the callback hangs off the core
libctx (as it is set by the application) not the actual fips library context. Also the callback can be set at
any time not just during the OSSL_provider_init() so it is calculated each time before doing any self test.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11752)
A DHX related test has been commented out and TODO(3) added, until DHX is added correctly to a provider.
Added generated files.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11884)
Changed many tests so they also test fips (and removed 'availablein = default' from some tests).
Seperated the monolithic evppkey.txt file into smaller maintainable groups.
Changed the availablein option so it must be first - this then skips the entire test before any fetching happens.
Changed the code so that all the OPENSSL_NO_XXXX tests are done in code via methods such as is_cipher_disabled(alg),
before the fetch happens.
Added missing libctx's found by adding a libctx to test_evp.
Broke up large data files for cipher, kdf's and mac's into smaller pieces so they no longer need 'AvailableIn = default'
Added missing algorithm aliases for cipher/digests to the providers.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12236)
The RAND_DRBG API did not fit well into the new provider concept as
implemented by EVP_RAND and EVP_RAND_CTX. The main reason is that the
RAND_DRBG API is a mixture of 'front end' and 'back end' API calls
and some of its API calls are rather low-level. This holds in particular
for the callback mechanism (RAND_DRBG_set_callbacks()) and the RAND_DRBG
type changing mechanism (RAND_DRBG_set()).
Adding a compatibility layer to continue supporting the RAND_DRBG API as
a legacy API for a regular deprecation period turned out to come at the
price of complicating the new provider API unnecessarily. Since the
RAND_DRBG API exists only since version 1.1.1, it was decided by the OMC
to drop it entirely.
Other related changes:
Use RNG instead of DRBG in EVP_RAND documentation. The documentation was
using DRBG in places where it should have been RNG or CSRNG.
Move the RAND_DRBG(7) documentation to EVP_RAND(7).
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/12509)
Because PVK uses RC4, we must ensure that default + legacy providers
are active.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12574)
Added der_writer functions for writing octet string primitives.
Generate OID's for key wrapping algorithms used by X942 KDF.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12554)
The test_cmp_cli was failing in the extended tests on cross-compiled
mingw builds. This was due to the test not using wine when it should do.
The simplest solution is to just skip the test in this case.
[extended tests]
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12555)
This test revolves around a central function that will first serialize
an EVP_PKEY, then deserialize the result into a new EVP_PKEY and
compare the two.
The following tests are currently implemented:
1. EVP_PKEY (RSA) -> DER, then DER -> EVP_PKEY (RSA).
2. EVP_PKEY (RSA) -> PEM, then PEM -> EVP_PKEY (RSA).
This one exercises deserializer chains, as we know that there is a
PEM -> DER and a DER -> EVP_PKEY (RSA) deserializer, but no direct
PEM -> EVP_PKEY (RSA) deserializer.
Additionally, a small fix in test_fail_string_common(), as strcmp()
could run past a buffer if one of the strings isn't terminated with
a null byte within the given length.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12410)
Added RSA oaep test that uses the pkeyutl application.
Added an openssl application option to support loading a (fips) provider via the '-config' option.
Added openssl application related environment variable 'OPENSSL_TEST_LIBCTX' (for testing purposes only),
that creates a non default library context.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11948)
Fixes#12405Fixes#12377
Calling Init()/Update() and then Init()/Update() again gave a different result when using the same key and iv.
Cipher modes that were using ctx->num were not resetting this value, this includes OFB, CFB & CTR.
The fix is to reset this value during the ciphers einit() and dinit() methods.
Most ciphers go thru a generic method so one line fixes most cases.
Add test for calling EVP_EncryptInit()/EVP_EncryptUpdate() multiple times for all ciphers.
Ciphers should return the same value for both updates.
DES3-WRAP does not since it uses a random in the update.
CCM modes currently also fail on the second update (This also happens in 1_1_1).
Fix memory leak in AES_OCB cipher if EVP_EncryptInit is called multiple times.
Fix AES_SIV cipher dup_ctx and init.
Calling EVP_CIPHER_init multiple times resulted in a memory leak in the siv.
Fixing this leak also showed that the dup ctx was not working for siv mode.
Note: aes_siv_cleanup() can not be used by aes_siv_dupctx() as it clears data
that is required for the decrypt (e.g the tag).
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12413)
As the ERR_raise() is setup at this point returng a range of negative values for errors is not required.
This will need to be revisited if the code ever moves to running from the DEP.
Added a -config option to the fips install so that it can test if a fips module is loadable from configuration.
(The -verify option only uses the generated config, whereas -config uses the normal way of including the generated data via another config file).
Added more failure tests for the raised errors.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12346)
Fixes#12449
On a aix7_ppc32 machine the error was of the form
match 'Previous owner died ' (2147483743) with one of ( 'Previous owner died', 'reason(95)' )
Stripping the trailing whitespace from the system error will address this issue.
Suggested fix by @pauldale.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12451)
Added Algorithm names AES-128-CBC-CTS, AES-192-CBC-CTS and AES-256-CBC-CTS.
CS1, CS2 and CS3 variants are supported.
Only single shot updates are supported.
The cipher returns the mode EVP_CIPH_CBC_MODE (Internally it shares the aes_cbc cipher code). This
would allow existing code that uses AES_CBC to switch to the CTS variant without breaking code that
tests for this mode. Because it shares the aes_cbc code the cts128.c functions could not be used directly.
The cipher returns the flag EVP_CIPH_FLAG_CTS.
EVP_CIPH_FLAG_FIPS & EVP_CIPH_FLAG_NON_FIPS_ALLOW have been deprecated.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12094)
Fixes#11864
- The dsa keygen assumed valid p, q, g values were being passed. If this is not correct then it is
possible that dsa keygen can either hang or segfault.
The fix was to do a partial validation of p, q, and g inside the keygen.
- Fixed a potential double free in the dsa keypair test in the case when in failed (It should never fail!).
It freed internal object members without setting them to NULL.
- Changed the FFC key validation to accept 1024 bit keys in non fips mode.
- Added tests that use both the default provider & fips provider to test these cases.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12176)
Test separately EC parameters and EC key generation.
Some curves only support explicit params encoding.
For some curves we have had cases in which generating the parameters
under certain conditions failed, while generating and serializing a key
under the same conditions did not.
See <https://github.com/openssl/openssl/issues/12306> for more details.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12307)
We now check that if libcrypto hasn't loaded the string for some particular
system error, it gives us "reason(nnn)" instead, where 'nnn' is the system
error number in decimal.
We go through all possible error macros that perl serves us, not only the
POSIX ones.
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/12343)
[extended tests]
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12275)
Move check that cert signing is allowed from x509v3_cache_extensions() to
where it belongs: internal_verify(), generalize it for proxy cert signing.
Correct and simplify check_issued(), now checking self-issued (not: self-signed).
Add test case to 25-test_verify.t that demonstrates successful fix
Fixes#1418
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10587)
by adding CA basic constraints, CA key usage, and key IDs to the cert
and by add -partial_chain to the verify call that trusts this cert
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10587)
Change default FIPS HMAC KEY from all-zero's
Use default FIPSKEY if not given on command line.
Make all -macopt in fipsinstall optional
Make all tests, except fipsinstall, use the default -macopt and
-mac_name flags.
Define and use FIPSDIR variable on VMS/MMS.
Also use SRCDIR/BLDDIR in SRCTOP/BLDTOP.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12235)
This has as effect that SHA1 and MD5+SHA1 are no longer supported at
security level 1, and that TLS < 1.2 is no longer supported at the
default security level of 1, and that you need to set the security
level to 0 to use TLS < 1.2.
Reviewed-by: Tim Hudson <tjh@openssl.org>
GH: #10787
There currently do not support 'ec_param_enc:explicit' with provider
side key generation. Reflect that by encoding the expected failure
with a Test::More TODO section for those particular tests.
Because the tests in this recipe are data driven, we implement this
mechanism with two functions, one for stuff that's supported and one
for stuff that isn't.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12080)
This commit adds a new recipe to test EC key generation with the
`genpkey` CLI app.
For each built-in curve, it tests key generation with text output, in
PEM and in DER format, using `explicit` and `named_curve` for parameters
encoding.
The list of built-in curves is static at the moment, as this allows to
differentiate between prime curves and binary curves to avoid failing
when ec2m is disabled.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12080)
Without passing -no-CAstore the default CAstore will be used and the
testsuite will fail the system has certificates installed.
Fixes: #11645
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12171)
Really this test should go in evp_extra_test. However that doesn't
currently support a non-default libctx (with the "null" provider in the
default libctx). So (for now) we create evp_extra_test2.c
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12159)
This is a result of removal of interactive mode.
Redirected it to now use 'openssl help'.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12164)
For FIPS validation purposes - Automated Cryptographic Validation Protocol (ACVP) tests need to be
performed. (See https://github.com/usnistgov/ACVP). These tests are very similiar to the old CAVS tests.
This PR uses a hardwired subset of these test vectors to perform similiar operations,
to show the usage and prove that the API's are able to perform the required operations.
It may also help with communication with the lab (i.e- The lab could add a test here to show
a unworking use case - which we can then address).
The EVP layer performs these tests instead of calling lower level API's
as was done in the old FOM.
Some of these tests require access to internals that are not normally allowed/required.
The config option 'acvp_tests' (enabled by default) has been added so that this
access may be removed.
The mechanism has been implemented as additional OSSL_PARAM values that can be set and get.
A callback mechanism did not seem to add any additional benefit.
These params will not be added to the gettables lists.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11572)
Certificate Management Protocol (CMP, RFC 4210) extension to OpenSSL
Also includes CRMF (RFC 4211) and HTTP transfer (RFC 6712).
Adds the CMP and CRMF API to libcrypto and the "cmp" app to the CLI.
Adds extensive documentation and tests.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11998)
We did not have a test of the low level CMAC APIs so we add one. This is
heavily based on the HMAC test.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11972)
Fixes#11742Fixes#11764
The newer RSA sp800-56b algorithm is being used for the normal case of a non multiprime key of at least length 2048.
Insecure key lengths and mutltiprime RSA will use the old method.
Bad public exponents are no longer allowed (i.e values less than 65537 or even). Values such as 2 that would cause a infinite loop now result in an error. The value of 3 has been marked as deprecated but is still allowed for legacy purposes.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11765)
Also make sure that the test do not 'pass' if their initialization fails.
Leave out the expensive parts of DSA key gen and RSA keygen for efficiency.
Fix use of the new CA configuration file test/ca-and-certs.cnf.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11733)
Discussions are ongoing but the OMC has approved the in-principle addition
of these algorithms to the upcoming FIPS validation.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12020)
There are cases where the fallback providers aren't treated right.
For example, the following calls, in that order, will end up with
a failed EVP_KEYMGMT_fetch(), even thought the default provider
does supply an implementation of the "RSA" keytype.
EVP_KEYMGMT *rsameth = NULL;
OSSL_PROVIDER_available(NULL, "default");
rsameth = EVP_KEYMGMT_fetch(NULL, "RSA", NULL);
For good measure, this also tests that explicit loading of the default
provider won't fail.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11926)
