Normally we expect a client to send new extensions in the ClientHello,
which may be echoed back by the server in subsequent messages. However the
server can also send a new extension in the certificate request message to
be echoed back in a certificate message
Fixes#16632
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16634)
This replaces the AES-128-CBC-HMAC-SHA1 cipher with a
non-encrypting version for use the test suite.
[extended tests]
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16693)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16671)
This is the length of the tag they use and should be considered an upper bound
on their strength.
This lowers their security strength to level 0.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16652)
The TRSCV state abbrev was used for two states:
* TLS_ST_CR_CERT_VRFY
* TLS_ST_SW_CERT_VRFY
The second one is wrong because it's a write operation.
The state for TLS_ST_SW_CERT_VRFY should be "TWSCV"
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16327)
The `sk` variable is assigned to `s->session->peer_chain`.
If `ssl3_digest_cached_records()` were to fail, then `sk` would still be
non-NULL, and subsequently freed on the error return. When the session
is freed, it will then attempt to free `s->session->peer_chain`,
resulting in a double-free (of `sk`).
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16309)
This function needs to be power up tested as part of the FIPS validation and
thus it needs to be inside the provider boundary. This is realised by
introducing a new KDF "TLS13-KDF" which does the required massaging of
parameters but is otherwise functionally equivalent to HKDF.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/16203)
Delete dtls timeout dead code in dtls1_handle_timeout
Fix: #15559
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/16151)
Fixes#16142
Add missing session timeout calculation in `ssl_get_new_session()`
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16145)
Various comments referred to s->packet and s->packet_length instead of
s->rlayer.packet and s->rlayer.packet_length. Also fixed is a spot where
RECORD_LAYER_write_pending() should have been used. Based on the review
comments in #16077.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/16086)
If an application is halfway through writing application data it should
not be allowed to attempt an SSL_key_update() operation. Instead the
SSL_write() operation should be completed.
Fixes#12485
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16077)
Sometimes this function gets called when the buffers have already been
set up. If there is already a partial packet in the read buffer then the
packet pointer will be set to an incorrect value. The packet pointer already
gets reset to the correct value when we first read a packet anyway, so we
don't also need to do it in ssl3_setup_read_buffer.
Fixes#13729
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16077)
We received a report of an "excessive message size" for a received
session ticket. Our maximum size was significantly less than the theoretical
maximum. The server may put any data it likes in the session ticket
including (for example) the full certificate chain so we should be able to
handle longer tickets. Update the value to the maximum allowed by the spec.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15877)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15974)
Fixes#15839
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15861)
Since the DH check is used only in DHE-PSK ciphersuites, it's
easy to miss it when updating the RSA mapping. Add cross-references
so that they remain consistent.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15853)
Sort SSL_SESSION structures by timeout in the linked list.
Iterate over the linked list for timeout, stopping when no more
session can be flushed.
Do SSL_SESSION_free() outside of SSL_CTX lock
Update timeout upon use
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8687)
The function dtls1_handle_timeout() calls dtls1_double_timeout() which
was calling dtls1_start_timer(). However dtls1_start_timer() is also
called directly by dtls1_handle_timeout(). We only need to start the timer
once.
Fixes#15561
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15595)
When EVP_MD_CTX_new fails call SSLfatal before the goto err.
This resolves a state machine issue on the out of memory condition.
Fixes#15491.
CLA: trivial
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15520)
For functions that exist in 1.1.1 provide a simple aliases via #define.
Fixes#15236
Functions with OSSL_DECODER_, OSSL_ENCODER_, OSSL_STORE_LOADER_,
EVP_KEYEXCH_, EVP_KEM_, EVP_ASYM_CIPHER_, EVP_SIGNATURE_,
EVP_KEYMGMT_, EVP_RAND_, EVP_MAC_, EVP_KDF_, EVP_PKEY_,
EVP_MD_, and EVP_CIPHER_ prefixes are renamed.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15405)
Otherwise, the state machine ends up being in a bad state:
```
SSL routines:write_state_machine:missing fatal:ssl/statem/statem.c:XXX:
```
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/15487)
Parameter "header" of ssl3_cbc_digest_record was fixed to a 13 bytes header
but used as a pointer. This caused a warning about out-of-bounds array access
with GCC 11.
Fixes#15462.
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15463)
The new names are ossl_err_load_xxx_strings.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15446)
Add a pass-through switch case for TLS13_AD_MISSING_EXTENSION in
ssl3_alert_code() and tls1_alert_code(), so that the call to
SSLfatal() in final_psk() will always actually generate an alert,
even for non-TLS1.3 protocol versions.
Fixes#15375
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15412)
